• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.180-185
• /
• 2006

Microwatt power level at relatively high voltage(order of volt) was produced by $Bi_{0.5}Sb_{1.5}Te_{3}/Bi_{2}Te_{2.4}Se_{0.6}$ thin film thermoelectric generators, and maximum output power varied with temperature difference in the square-law relation. Output voltage and current were possible to control by changing the way of electrical connection as well as the number of stacking plate-modules. Variation of open circuit voltage and short circuit current with temperature difference showed a linear relationship. There were, however, some differences in variations; open circuit voltage were dependent on the number of plate-module when connected in series, but it was not for parallel connection. On the other hand, short circuit current showed the opposite behavior to the case of open circuit current.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.108-116
• /
• 2015

This study analytically reviewed the behavior of Steel Plate Concrete(SC) walls subjected to combined loads of axial force, flexural moment, and shear force to investigate the effects of shape and arrangement spacing of studs on the behavior of SC walls. To perform it, 9 cases of finite element analyses considering the different shape and spacing of studs in SC wall were carried out. The results showed that, for SC walls combined steel plate and concrete according to the Design Code, the compressive strength is higher than the tensile strength. Compared results from the finite element analyses of SC walls subjected to combined loads with Design Code showed that all cases were higher than the design strength. For KEPIC SNG, the moment and shear force were not influenced by the axial force of 0.1 to 0.2 times axial strength, however, from the analyses, it was found that the values were decreased as the axial force is increased.

• The Journal of Society for e-Business Studies
• /
• v.18 no.4
• /
• pp.195-214
• /
• 2013

Case-based reasoning is a methodology for solving problems more quickly and efficiently by bringing the most similar case of a given problem from past cases and transforming it to fit the current situation. The most important performance indicator of case-based reasoning is the number of cases, so it is difficult to apply the methodology for the area which has not enough cases. In this paper, we proposed a method to exchange cases based on the Semantic Web in order to overcome the problems. Inparticular, we separated cases into sub-cases to make it possible creating new cases by combining the appropriate sub-cases even if there was no proper full case. In order to achieve that, we designed an ontology that connects a case and its sub-cases, represents detailed similarity rules that compare sub-cases, and represents the rules for the combination of sub-cases. Moreover, we designed and implemented a semantic distributed case-based reasoning framework where a case requester can request sub-cases via the Web from case providers and integrates sub-cases into a new case by using the ontology.

• Journal of Korea Multimedia Society
• /
• v.11 no.9
• /
• pp.1310-1323
• /
• 2008

Recently, many studies on automated generation of composite Web services have been done. Most of these works compose Web services by chaining their inputs and outputs, but do not consider the functional semantics. Therefore, they may construct unsatisfied composite services against users' intention. Futhermore, they have high time-complexity since every possible combinations of available services should be considered. To resolve these problems, this paper proposes a sophisticated composition method that explicitly specifies and uses the functional semantics of Web services. Specifically, A graph model is constructed to represent the functional semantics of Web services as well as the dependency among inputs and outputs. On the graph, we search core services which provide the requested function ality and additional services which transform between I/O types of the user request and the core services. Then, composite services are built from combinations of the discovered services. The proposed method improves the semantic correctness of composite services by the functional semantics of Web services, and reduces the time complexity by combinations of functionally related services.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.115-128
• /
• 2006

The analytic methodology of a merging area in KHCM(2004) supposes that congestion nay occur when traffic demand is more than capacity However, in many cases, congestion on merging area occurs when summation of traffic demand of main line and ramp is less than capacity, and in present methodology analysis of how main line and ramp flow effect on congestion occurrence is difficult. In this study, the model that is able to estimate traffic flow condition on merging area in accordance with the combination of main line and ramp demand flow is developed. Main characteristic of the model is estimation of maximum possible throughput rate and maximum throughput rate according to the combination of main line and ramp demand flow. Through the estimation of maximum possible throughput rate and maximum throughput rate. it was Possible to predict whether congestion would occur or not and how much maximum throughput rate and congestion would be on merging area. On one hand, in present LOS evaluation methodology on merging area, congestion state is determined as un-congested flow if demand flow is less than capacity. Therefore, to establish more reasonable In evaluation method, new criterion of LOS evaluation on merging area was searched based on the model of this study.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.267-274
• /
• 2024

In this paper, we investigated the number of domestic patent applications by year, the number of domestic patent disclosures by year, and the number of domestic registrations by year regarding smart factories. The number of patent applications by applicant type was investigated. Based on the patents studied, it was found that the IPC appearing in the most patents was G05B 19/418. In addition, through social network analysis of smart factory patented IPCs, it was found that G05B 19/418 was the IPC with the highest degree of centrality. From the above, if the IPC of the core technology of the patent submitted for smart factory is G05B 19/418, the technology combined with G05B 23/02, that is, the technology combining "factory control" and "monitoring" is the most patented. When the IPC of the core technology was G06Q 50/04, it was confirmed that the technology combined with G06Q 50/10, that is, the technology combining "manufacturing" and "service" was the most applied for patents. Through this, it was found that in order to apply for a patent for a smart factory, it would be necessary to file a patent application that takes into account the connectivity between IPCs.

• Journal of KIISE:Software and Applications
• /
• v.32 no.4
• /
• pp.247-257
• /
• 2005

Generally, the network topology design problem is characterized as a kind of NP-hard combinatorial optimization problem, which is difficult to solve with the classical method because it has exponentially increasing complexity with the augmented network size. In this paper, we propose the efficient approach with two phase that is comprised of evolutionary computation approach based on Prufer number(PN), which can efficiently represent the spanning tree, and a heuristic method considering 2-connectivity, to solve the highly reliable network topology design problem minimizing the construction cost subject to network reliability: firstly, to find the spanning tree, genetic algorithm that is the most widely known type of evolutionary computation approach, is used; secondly, a heuristic method is employed, in order to search the optimal network topology based on the spanning tree obtained in the first Phase, considering 2-connectivity. Lastly, the performance of our approach is provided from the results of numerical examples.

• KSBB Journal
• /
• v.16 no.6
• /
• pp.562-567
• /
• 2001

Aspergillus niger LK harboring the enantioselective epoxide hydrolase (EHase) activity was isolated, and enantioselectivity of EHase was tested for various racemic aromatic epoxides. The gene encoding epoxide hydrolase was cloned from cDNA library generated by reverse transcriptase-polymerase chain reaction of the isolated total mRNA. Sequence analysis showed that the cloned gene encodes 398 amino acids with a deduced molecular mass of 44.5 kDa. Database comparison of the amino acid sequence reveals that it is similar to fungal EHase, whereas the sequence identity with bacterial EHase is very low. Recombinant expression of the cloned EHase in Escherichia coli BL21 yielded an active EHases, which can offer a potential biocatalyst for the production of chiral epoxides.

• Journal of Environmental Policy
• /
• v.7 no.3
• /
• pp.1-40
• /
• 2008

In this paper, I examine the welfare effects of various revenue-neutral tax reforms in the case of two vertically-related oligopolies(downstream and upstream), where the upstream industry is polluting. I show analytically when and how government can improve welfare by initiating various tax reforms, regardless of either the feasibility of a lump sum transfer or the availability of a tax on pollution. The profit wedge that is the difference between the unit price and the unit cost and the marginal environmental damages(MED) becomes important to decidethe direction of a tax reform and is crucial to determine the direction of welfare-improving tax-subsidy schemes. I also show that a tax on pollution(Pigouvian tax) is superior to a tax on intermediate good even in the case of vertically-related oligopolies, because the former always brings in positive welfare effect from the upstream firms' input substitutability, which a tax on intermediate good cannot provide. Some policy implications for 'reducing environmentally-harmful subsidies' are also discussed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.295-304
• /
• 2000

To evaluate the structural integrity for the strainer under seismic loading the seismic analysis and design were performed for T-type strainer in accordance with ASME, Section Ⅲ, Class 3(ND). Since there are no specified design requirements for the strainer in ASME Code, the strainer body was analysed according to ND-3500, valve design. Flanged joints connected with PCS piping were designed according to ND-3658.3. And the criteria for the cover flange was governed by the Appendix XI. Both a frequency analysis and an equivalent static seismic analysis of the strainer were carried out using the finite element computer program, ANSYS. The frequency analysis results show the fundamental natural frequency is greater than 33Hz, thus justifying the use of the equivalent static analysis through which membrane and bending stresses are obtained in the critical points near the branch connection area. The results of the seismic evaluation fully satisfied with the structural acceptance criteria of the ASME Code. Accordingly the structural integrity on the strainer body and flanges were proved.