• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.10-18
• /
• 2006

In this thesis paper the effect that the change in the brightness of headlights has on a driver's perception had been researched. For this research, an indoor laboratory was constructed and designed. Then, a system to measure the reaction braking time of finding obstacle and the subject's brain waves after a moment of change in the headlamp's brightness was constructed. And before the real experiment was began, the trial experiment to decide test time, subject's rest time, detailed experimental steps, the headlamp's patterns of voltage change and an obstacle course was executed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.197-200
• /
• 2001

반응성 스퍼터링법으로 TaN film을 증착한 후 열처리온도에 따라 TaN 박막의 $R_s$(sheet resistance) 특성을 평가하고 미세구조 변화에 따른 전기적 특성 변화를 고찰하였다. TaN 박막을 열처리한 결과 $400^{\circ}C$에서 $600^{\circ}C$까지는 (110)의 회절피크만 보이다가 $700^{\circ}C$ 에서는 (200)의 회절 피크가 나타났고 특히 as-deposition 상태와 $300^{\circ}C$ 열처리시에는 Ta와 TaN 상이 혼재한 상태로 나타났으며 전기저항 변화는 as-deposition 상태가 $140{\Omega}/{\square}$로 가장 높았으며 열처리 온도가 증가함에 따라 저항은 점차적으로 감소하다가 $600^{\circ}C$와 $700^{\circ}C$에서는 전기저항이 다시 증가하였다. $500^{\circ}C$까지는 표면 형상이나 표면조도보다는 열처리 온도의 증가에 따른 TaN 박막의 결정구조 변화가 전기저항에 영향을 주는 주 요인으로 작용하고, $600^{\circ}C$와 $700^{\circ}C$ 열처리시에 결정립의 증가에도 불구하고 전기저항이 증가하는 것은 고온 열처리에 의한 표면조도가 증가하였기 때문이라고 생각된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.167-175
• /
• 2011

The purpose of this study is to examine the impact that change in speed and modeling methods has on maglevs' runnability. The study constructed equations of motion on 4-DOF, 6DOF, and 10-DOF vehicles respectively and carried out numerical analysis, applying 4th Runge Kutta method, in order to run six different model maglev as changing the vehicles speed on the same bridge that had 2000 to 1 deflection. The analysis revealed that maglev's runnability improved as speed was lower and the specific model had higher number of bogey and EMS.

• Journal of Powder Materials
• /
• v.18 no.5
• /
• pp.406-410
• /
• 2011

Green strength is an important property of powders since high green strength guarantees easy and safe handling before sintering. The green strength of a powder compact is related to mainly mechanical and surface characters, governed by interlocking of the particles. In this study, the effect of powder surface roughness on the green strength of iron powders was investigated using a transverse rupture test. Three-dimensional laser profiler was employed for quantitative analyses of the surface roughness. Two different surface conditions, i.e. surface roughness, of powders were compared. The powders having rough surfaces show higher green strength than the round surface powders since higher roughness leads increasing interlocked area between the contacting powders.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.671-676
• /
• 2011

To determine the optimum light intensity for mass culture of the brackish-water cyclopoid copepod Paracyclopina nana, survival, growth, and productivity of the copepod were examined at several light intensities (0, 10, 100, 500, 1,000 lx). The survival rate of P. nana from nauplius to adult decreased with increasing light intensity. The highest survival rate was found under the dark condition, with 61.7% surviving; no significant difference was observed between 0 and 10 lx (51.7%) and the lowest survival rate was with 100 lx (26.7%). Survival rates at 500 and 1,000 lx were significantly lower in comparison with other conditions. The developmental period from nauplius to copepodid (5.8 days) and to adult (11.8 days) at 10 lx was significantly shorter than in the other treatments. Daily mean nauplius production of adult females over 7 days at 0, 10 and 100 lx was significantly higher than at 500 and 1,000 lx. In the 1,000 lx treatment, 99% of the adult females died on the $14^{th}$ day. The optimum light intensity for the mass culture of P. nana could be 10 lx, which had no adverse effects on survival, development, or reproduction.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.1098-1106
• /
• 2016

To study the influence of light intensity on blind-side hypermelanosis of starry flounder, Platichthys stellatus, we compared growth, glucose, cortisol, ratio of malpigmented blind-side area, ambicolored fish ratio and expression of mch mRNA for 60 days in 0 lux(darkness) and 20 lux(low light density). The test was done in duplicate at 50 fish/tank with the selected ordinary juvenile flounder. The rearing was performed in FRP aquarium tanks ($H100cm{\times}L100cm{\times}W100cm$). Growth was higher in the 0 lux. The ratio of malpigmented blind-side area and ambicolored fish ratio were significantly higher at the 0 lux than at the 20 lux. The result suggests that 20 lux could inhibit the hypermelanosis. The expression level of MCH 1, 2 mRNA was significantly lower in 0 lux, indicating that MCH 1, 2 and light intensity are related to blind-side hypermelanosis of starry flounder.

• Journal of the Korean Ceramic Society
• /
• v.36 no.1
• /
• pp.55-60
• /
• 1999

${\beta}$-SiC thin film was deposited on a Si substrate without buffer layer using a single precursor of Hexamethyldisilane (Si2(CH3)6) by chemical vapor deposition method. HCI gas was introduced into hexamethyldisilane /H2 gas mixture, and the feeding schedule of HCI and precursor gases was modified in order to enhance the selectivity of SiC deposition between a Si substrate and a SiO2 mask. The effect of HCI gas on the surface roughness of the SiC film was investigated and typical electrical properties of the SiC film were also investigated by Hall measurement.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.5
• /
• pp.9-17
• /
• 2013

Preferred combinations of illuminance and color temperature of lighting depend on daily living activities. We investigated whether the illumination stimuli of LED lighting can enhance attention and relaxation level by controlling color temperature and illuminance level according to activities. Illuminations and color temperatures of LED flat panels are controlled in accordance with activities such as office work and resting. The attention and relaxation level under the task specific lightings are compared with those under normal lighting condition. Single channel EEG signals from the NeuroSky's Mindset are used to estimate attention and relaxation level of human subjects under different lighting conditions. Experiment results show that high color temperature with high illuminance of LED lightings (6600K, 800lx) shows improved attention level compared with conventional lighting conditions (4000K, 500lx).

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.251-257
• /
• 2015

Recently, techniques for detecting the movement of the object of energy saving, impact prevention, such as automatic door opening and closing has been applied to various fields. Doppler sensor does not receive a large impact on the environment, such as conventional infrared ray sensor, a problem with an ultrasonic sensor as a sensor which can compensate the temperature, noise, dust and so on. In this paper, when the object to be detected, the LED lamp is turned on 24 hours a Doppler sensor ON, if not switch to the OFF state, the illumination of the LED lamp has been developed for controlling the two-stage converter. Doppler sensor developed by applying the converter module and the power-saving control section leader and demonstrated the power savings.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.71-76
• /
• 2009

Effects of dark adaptation have large safety implications. This study was aimed to investigate the effects of varying illuminance and the size of critical detail on visual performance (i.e., time-to-detect) in a dark room environment. While adapting to the dark environment, ten subjects were asked to detect and answer simple numerical expressions under 9 experimental conditions (3 illuminance level $\times$ 3 target size). The ANOVA results revealed that the time-to-detect was significantly affected by both of the illumination level and the size of critical detail. As illumination increased from 10 lux to 20 lux, the time-to-detect was significantly declined. For the size of critical detail, 0.5/min size (i.e., equal to 2 minutes of visual angle) resulted in a shorter time-to-detect, as compared to 0.7/min size (i.e., equal to 1.6 minutes of visual angle). Potential applications of this research include the development of design guidelines for illumination and warning signs in poorly illuminated viewing environments.