• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.39-47
• /
• 2005

In this paper, a method of station keeping strategy using relative orbital motion and numerical optimization technique is presented for geostationary spacecraft. Relative position vector with respect to an ideal geostationary orbit is generated using high precision orbit propagation, and compressed in terms of polynomial and trigonometric function. Then this relative orbit model is combined with optimization scheme to propose a very efficient and flexible method of station keeping planning. Proper selection of objective and constraint functions for optimization can yield a variety of station keeping methods improved over the classical ones. Results from the nonlinear simulation have been shown to support such concept.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.56-64
• /
• 2006

Station collocation of closely placed multiple GEO spacecraft is required to avoid the problem of collision risk, attitude sensor interference and/or occultation. This paper presents the method of obtaining the orbit correction scheme for collocating two GEO spacecraft within a small station-keeping box. The relative motion of each spacecraft with respect to the virtual geostationary satellite is precisely expressed in terms of power and trigonometry functions. This closed-form orbit propagator is used to define the constraint conditions which meet the requirements for the station collocation. Finally, the technique of constrained optimization is used to find the orbit maneuver sequence. Nonlinear simulations are performed and their results are compared with those of the classical method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1142-1155
• /
• 2014

The classical PCM/PSK/PM scheme has been commonly used for TC & R applications between satellites and ground stations in the S-band. We analyzed TC & R link performance between ground station and the geostationary satellite which employs PCM/PSK/PM, when the satellite are particularly on the Super Synchronous Transfer Orbit(SSTO). The satellite parameters on SSTO are assumed to be those operating on the geostationary orbit, considering heritage aspect. In the uplink, the results shown indicate that sufficient margins over 3 dB are obtained when the EIRP of ground station is greater than 65 dBW. The down link performance is of great interest. By adjusting the telemetry modulation index and ranging modulation index, we could obtain the required margin of 3.0 dB in the down link, and find out the minimum G/T of ground station. In conclusion, the previously operated ground stations during LEOP at COMS launch, can be operational when GEO injection is made using SSTO(65,000 km and 70,000 km).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.60-71
• /
• 2017

A trajectory analysis program is developed using a 3DOF trajectory model for the performance analysis of geostationary launch vehicles by system options. Launch trajectory and the performance of injection at GTO was estimated using this program for several propellant options, engine types, number of engines and the location of launch site. Results of the analysis presents that the possibility of mission accomplishment by several design options using domestic launch sites and the development direction of GEO launch vehicles.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.88-93
• /
• 2005

A conceptual study about the angle information based orbit determination technique for a geostationary satellite was performed. With an assumption that the simultaneous observing of the earth and nearby stars is possible, we confirmed that the view angles between the earth and stars can be use as inputs for orbit determination process. By the MATLAB simulation with least square method, the convergence is confirmed. This conceptual study was performed with the COMS for instance. This technique will be able to use as a back-up of ground station's orbit determination or a part of autonomous satellite operation.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.40-47
• /
• 2013

GEO-KOMPSAT2 shall be designed to produce higher quality of image than that of COMS, and this requires the ground system to provide orbit data with high accuracy; better than 2km which is sort of high accuracy when it comes to geostationary satellite. For GEO-KOMPSAT2, KARI is planning to use ranging data for orbit determination, obtained from two ranging stations located in KARI and oversea country with long longitudinal baseline. This paper estimated achievable orbit determination accuracy using covariance analysis under assumption of using two ranging stations; SOC and available secondary tracking stations located in oversea countries. In addition to covariance analysis, in order to validate the analysis, the Monte-Carlo simulation has been performed and compared to the covariance analysis.

• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.27-33
• /
• 2024

According to the success of the Nuri Space Launch Vehicle (KSLV-II) and the development goal of the next generation space launch vehicle (KSLV-III), it is expected that the domestic geostationary satellite capability will be increased from (1 to 3.7) ton. Also, it is predicted that substantial ability of about 1 ton can be provided for the space exploration of the Moon, Mars, asteroids, etc. The Goheung space launch site is optimized for sun-synchronous small satellites, and due to the essential precondition that the launch trajectory does not impinge another country's sovereign airspace, it is not satisfactory as a geostationary satellite launching site. Its latitude also requires more energy to shape the rotating orbital plane from the initial injection status. This results in a decreasing factor of economic feasibility, including the operating complexity. Therefore, in parallel with the development of a next generation space launch vehicle, the practical process for acquisition of oversea land or sea space launch site near the Earth's equator and research for the optimization of orbiting methods of geostationary satellite injection must be continued.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.5
• /
• pp.417-424
• /
• 2021

The S-band telemetry and telecommand formats for geostationary orbit satellites should have sufficient reliability, since they transmit massive satellite health data and receive the mission commands in the 36,000km of the geostationary orbit. Also, they have to efficiently manage the large quantity of satellite health data under the limited data transmission rate. Cheollian-2A and 2B satellites were developed by Korea Aerospace Research Institute and launched at 2018 and 2020, respectively. Their missions are to conduct continuously the mission of Cheollian-1, which was the first geostationary orbit satellite of Korea. Therefore, the fundamental S-band data format design for Cheollian-2A and 2B should meet the requirements of Cheollian-1. Meanwhile the latest remote data processing techniques for these newest geostationary orbit satellites should be implemented. In this paper, the advanced S-band space data formats and management methods are proposed for more efficient data transmission, reception and operation with the limited data rate of the geostationary orbit satellites. The implemented results in the flight software of Cheollian-2A and 2B are described in detail.

• Journal of Aerospace System Engineering
• /
• v.10 no.4
• /
• pp.90-97
• /
• 2016

GEO-KOMPSAT-2A and GEO-KOMPSAT-2B are under development by KARI to replace the COMS mission, and will be launched in 2018 and 2019, respectively. GEO-KOMPSAT-2 will be launched and injected into the GTO (Geostationary Transfer Orbit) by the Ariane V launcher. Once injected into the GTO, the satellites are transferred to the drift orbit by applying a series of apogee engine burns. The burn epoch time, duration, and intervals are selected such that the satellite is placed closest to the target drift longitude, or at the drift start longitude. For GEO-KOMPSAT-2, four or five LAE (Liquid Apogee Engine) burns will be applied for drift orbit injection. This paper establishes the GEO-KOMPSAT-2 LAE burn plan, considering predefined constraints and adjustments, taking into account the perturbing forces. Two approaches have been analyzed: the first is a single shot approach, whereas the other is an iteration based optimal solution. Optimal solution has been obtained using the Focusleop, a geostationary satellite LEOP tool.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.19-25
• /
• 2012

GEO-KOMPSAT2 shall provide higher quality of image than the COMS and uses star tracker instead of earth sensor, which requires precise onboard orbit information. This requires precise on-ground orbit determination. For COMS, orbit determination is performed using the ranging data obtained from tracking system located in DAEJON. For accurate orbit determination of GEO-KOMPSAT2, KARI is building a secondary tracking station in CHUUK Islands. In this paper, the achievable accuracy of table based onboard orbit parameter generator which interpolates orbit data obtained from on-ground orbit determination using tracking data collected from two ground stations. Two types of approaches have been applied; covariance analysis and numerical analysis. By combining two analysis results, total orbit error has been estimated.