• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.10 no.2
• /
• pp.25-30
• /
• 1992

Most algorithms in computer vision and digital photogrammetry assume that digital stereo pairs are registered in epipolar geometry. But, an aerial stereo pair is not likely to be in epiplar geometry since the attitude of the camera at the instant of exposure is different at every exposure station. In this paper, stereo digital imagery is obtained from aerial stereo pair by scanner. Then procesure to resample the digital imagery to epipolar geometry using exterior orientation elements after absolute orientation is described. As a result, a stereo imagery in epipolar geometry is produced from stereo digital imagery. Epipolar imagery in this paper is applied to the image matching method by digital image correlation technique. Then, a digital elevation model is produced from the result of image matching. The digital elevation model in this paper is compared to the other digital elevation model produced by analytical plotter. As a result, an economical method to generate digital elevation model is presented.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.5
• /
• pp.241-248
• /
• 1999

Recently, many linear motion generators and motors are rapidly finding applications that ranges from short stroke linear motion vibrators, such as dynamic cone type loudspeakers to stirling engine driven linear reciprocating alternators, compressors, textile machines etc. The stroke-length may go up to 2m, and the maximum speed is in the range of 5 to 10m/s with oscillating frequency as high as 15 kHz. Therefore, the linear oscillating actuators(LOAs) may be considered as variable speed drivers of precise controller with stoke-length and reversal periods during the reciprocating motion. In this paper, the design, fabrication, experiments, and extraction of control parameters of a moving coil type LOA for driving of linear reciprocating motion control systems, are treated. The actuator consists of the NdFeB permanent magnets with high specific energy as the stator produced magnetic field, a coil-wrapped nonmagnetic hollow rectangular bobbin structure, and an iron core as a pathway for magnetic flux. Actually, the design is accomplished by using FEM analysis for the basic configuration of a magnetic circuit, and characteristic equations for coil design. In order to apply as the drivers of a linear motion reciprocating control system, the control parameters and circuit parameters, such as input voltage-stoke, exciting frequency-stoke, coil inductance and so on, are extracted from the analysis and experiments on concerning a fabricating LOA.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.115-122
• /
• 2002

The mainly used technique to rectify satellite images with distortion is to develop a mathematical relationship between the pixel coordinates on the image and the corresponding points on the ground. By defining the relationship between two coordinate systems, a polynomial model is designed and various linear transformations are used. These GCP based geometric correction has performed overall plane to plane mapping. In the overall plane mapping, overall structure of a scene is considered, but local variation is discarded. The highly variant height of region is resampled with distortion in the rectified image. To solve this problem, this paper proposed the TIN-based rectification on a satellite image. The TIN based rectification is good to correct local distortion, but insufficient to reflect overall structure of one scene. So, this paper shows the experimental result and the analysis of each rectification model. It also describes the relationship GCP distribution and rectification model. We can choose a geometric correction model as the structural characteristic of a satellite image and the acquired GCP distribution.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.39-47
• /
• 2001

In this paper, the hydroelastic behavior of a mat-type large floating structure is analyzed in time domain by using mode superposition method. The time-memory function is estimated by Fourier transforming the wave damping coefficients, which are computed by a higher-order boundary element method based on potential theory. Meanwhile, the structural response is obtained by time integrating the eigenmodes of the structure. Numerical examples are made for three test cases on the scaled model of a mat-type large floating structure ; weight pull-up case, weight drop case and weight moving case. In all three cases, the numerical results coincide well with experimental data.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.18-27
• /
• 2012

Optimal quantizers in conducting the entropy-constrained quantization for high bit rates have the lattice structure. The quantization process is simple due to the regular structure and various quantization algorithms are proposed depending on the lattice. In this paper, such a lattice vector quantization is implemented by using the sample-adaptive product quantizer (SAPQ). It is shown that several important lattices can be implemented by SAPQ and the lattice vector quantization can be performed by using a simple integer-transform function of scalar values within SAPQ. The performance of the proposed lattice SAPQ is compared to the entropy-constrained scalar quantizer and the entropy-constrained SAPQ (ECSAPQ) at a similar encoding complexity. Even though ECSAPQ shows a good performance at low bit-rates, lattice SAPQ shows better performance than the ECSAPQ case for a wide range of bit rates.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.72-78
• /
• 2008

Although the H.264 video coding scheme is popular, it is not efficient for high-definition (HD) video coding because the size of its macroblock is relatively small for the HD video resolution. In this paper, we propose a new intra coding scheme based on the enlarged macroblock size. For the luminance component, intra $4{\times}4$ prediction and intra $16{\times}16$ prediction in H.264 are scaled into intra $8{\times}8$ prediction and intra $32{\times}32$ prediction, respectively. For the chrominance components, intra $8{\times}8$ prediction is extended to intra $16{\times}16$ prediction. Along with the $8{\times}8$ basic coding block size, an $8{\times}8$ integer discrete cosine transform (DCT) is used. Experimental results show that the proposed algorithm improves coding efficiency of the intra coding for HD video: PSNR gain by 0.23dB and bit-rate reduction by 5.32% on average.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.87-87
• /
• 2014

조선 전기 세종(世宗, 1418-1450)에 의해 천체관측기기와 천문역법을 개발하는 사업이 있었다. 이 때 조선의 천문대인 간의대가 건설되었고, 더불어 소간의, 일성정시의, 현주일구, 천평일구, 정남일구, 앙부일구 등 다수의 소형화된 천문의기가 개발되었다. 이보다 앞서 중국 원(元)왕조의 최신 관측기기였던 간의, 규표, 혼천의, 혼상 등을 제작하였는데, 이 과정에서 습득한 기술적 경험을 바탕으로 소형화된 천문의기 새롭게 발전시킨 것으로 보인다. 당시 천문의기를 구성하는 것에는 천구의 도수를 눈금으로 새긴 원형의 환(環)이나 구형의 혼(渾)이 있었다. 조선에서는 시헌력을 도입하기 전까지 천구의 도수(주천도수)를 365.25 등분하였고, 하루 12시진을 백각으로 나누었으며, 이를 각각 주천도분환과 백각환에 눈금을 새기었다. 당시에는 환의 둘레에 주천도수와 백각을 새기는 기술적인 어려움이 있었다. 이러한 제작 상의 문제를 해결하는 방법으로, 본 연구에서는 도수나 시각의 각거리를 일정한 길이의 단위로 설정하여 원주를 등분하였을 것으로 가정하였다. 즉 조선의 소형화된 천문의기는 주천도의 1도나 백각의 1각을 일정한 길이의 단위인 푼이나 치의 정수배로 하여 환의 둘레에 주천도수와 백각의 눈금을 새겼을 것으로 추정하였다. 만일 주천도의 1도 각거리를 1푼으로, 백각의 1각 각거리를 1푼으로 하는 표준 변환을 적용하면, 각각 환의 지름이 1.16치, 0.32치가 된다. 이러한 방법이 현존하는 일성정시의나 소간의의 세 종류의 환과 현주일구의 백각환의 특성과 잘 일치함을 보이고 있다. 이 연구의 결과는 향후 소형화된 천문의기의 구조적인 재원을 연구할 때나 출처가 불분명한 의기의 크기를 이해하는데 주요한 역할을 할 수 있을 것으로 기대한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.97-100
• /
• 2001

For the auto-configuration of diverse hosts and automation of network management as many electronic machines and industrial components are becoming connected to Internet, it is possible to use autoconfiguration using DHCP and network management protocol such as SNMP, CMIP. But these technologies are not developed maturely and lack various standardizations yet because these are designed for restrictive purposes in the past. The new working group "Zeroconf" is made in IETF at March, 2000, it is aimed for making standards of autoconfiguration which is applied to impromptu ad-hoc networks in automobiles, trains, planes and home network or mobile networks. In this paper, we introduce the IPv6 based autoconfiguration technologies such as IP interface configuration, translation between host name and IP address, IP multicast address allocation and service discovery. Finally, trends of standardization in Zeroconf working group will be shown. be shown.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2618-2624
• /
• 2009

Harmonics (or distortion in wave form) has always existed in electrical power systems. It is harmless as long as its level is not substantial. However, with the recent rapid advancement of power electronics technology, so-called nonlinear loads, such as variable frequency drives for motor power/speed control, are increasingly finding their way to shipboard or offshore applications. In this paper a new approach to direct torque control (DTC) of induction motor drive is presented. In comparison with the conventional DTC methods the inverter switching frequency is constant and is dramatically increased, requiring neither any increase of the sampling frequency, nor any high frequency dither signal. The well-developed space vector modulation technique is applied to inverter control in the proposed DTC-based induction motor drive system, thereby dramatically reducing the current harmonics. As compared to the existing DTC approach with constant inverter switching frequency, the presented new approach does not invoke any concept of deadbeat control, thereby dramatically reducing the computations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.11
• /
• pp.66-78
• /
• 2015

With the development of bio computing technology, DNA watermarking to do as a medium of DNA information has been researched in the latest time. However, DNA information is very important in biologic function unlikely multimedia data. Therefore, the reversible DNA watermarking is required for the host DNA information to be perfectively recovered. This paper presents a reversible DNA watermarking using least square based prediction error expansion for noncodng DNA sequence. Our method has three features. The first thing is to encode the character string (A,T,C,G) of nucleotide bases in noncoding region to integer code values by grouping n nucleotide bases. The second thing is to expand the prediction error based on least square (LS) as much as the expandable bits. The last thing is to prevent the false start codon using the comparison searching of adjacent watermarked code values. Experimental results verified that our method has more high embedding capacity than conventional methods and mean prediction method and also makes the prevention of false start codon and the preservation of amino acids.