• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.552-560
• /
• 2013

In this paper, an optimization algorithm for the block assembly accuracy control assessment is proposed with consideration for the current block assembly process and accuracy control procedure used in the shipbuilding site. The objective function of the proposed algorithm consists of root mean square error of the distances between design and measured data of the other control points with respect to a specific point of the whole control points. The control points are divided into two groups: points on the control line and the other points. The grouped data are used as criteria for determining the combination of 6 degrees of freedom in the registration process when constituting constraints and calculating objective function. The optimization algorithm is developed by using combination of the sampling method and the point to point relation based modified ICP algorithm which has an allowable error check procedure that makes sure that error between design and measured point is under allowable error. According to the results from the application of the proposed algorithm with the design and measured data of two blocks data which are verified and validated by an expert in the shipbuilding site, it implies that the choice of whole control points as target points for the accuracy calculation shows better results than that of the control points on the control line as target points for the accuracy of the calculation and the best optimized result can be acquired from the accuracy calculation with a fixed point on the control line as the reference point of the registration.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.41-63
• /
• 2006

The purpose of this study was to establish and apply 'term learning strategy' for learners whose basic skill, interest, and motivation for learning is lower, and to increase the learned capabilities of subjects' 'industry introduction', required for industrial technical high school students. Another purpose was to identify when the learning strategy established was applied, its affect on how well learners understood terms in a particular unit of material, and, after instruction presented in accordance with 'term learning strategy,' evaluate the ease with which subjects understood the teacher's explanation of the unit of subject, how well they understand the main concepts of the unit of subject, and to what extent the presentation interested and motivated the subjects. The researcher established 'term learning strategy' based on the principles of Garg's "Nine Steps for Events of Instruction." The study included 35 first grade participants purposely selected from 33 classes at 1155 students in K industrial technical highschool. Data was collected via tests and surveys. Results indicated that 'term learning strategy' facilitated thorough understanding of terms and concepts related to the unit of subject, as well as a better understanding of the teacher's explanation and increased interest and motivation in learning. In addition, the "term learning strategy" increased interaction among learners in the instruction setting. Finally, implications of this study and implementation recommendations for this instructional strategy were presented.

• Korean Journal of Materials Research
• /
• v.8 no.4
• /
• pp.368-374
• /
• 1998

The corrosion characteristics of zirconium alloys have been investigated in various aqueous solutions of LiOH. NaOH, KOH, RbOH. and CsOH at 3S$0^{\circ}C$. The concentrations of solutions were set to 4.3 mmol and 32.Smmol with equimolar $M^+$ and OH . The oxide characterization was performed using TEM on the samples corroded in 32. Smmol LiOH, NaOH, and KOH solution. The samples were prepared to have the same oxide thickness for the pretransition and post- transition regimes. Considering the trend of experimental data, the cation would playa major role in the corrosion process of Zr alloys in alkali hydroxide solutions. The microstructures of the oxides formed in various solutions were quite different. In LiOH solution the oxides grown in pre-transition as well as post-transition had the equiaxed structures with many pores and open grain boundaries. The oxides grown in NaOH solution had the protective columnar structures in pre-transition and the equiaxed structures with many open grain boundaries in post- transition. On the other hand. in KOH solution the columnar structure was maintained from pre- transition to post- transition. It was considered that the cation incorporation into zirconium oxide controlled the oxide characteristics and the corrosion acceleration in alkali hydroxide solutions.

• Journal of Food Hygiene and Safety
• /
• v.29 no.2
• /
• pp.92-98
• /
• 2014

The safety of fake anti-impotence drugs (fake Viagra : 26 samples, fake Cialis : 25 samples) distributed in Gyeonggi province was studied by monitoring the concentrations of anti-impotence pharmaceutical ingredient and their analogues. The concentrations of anti-impotence pharmaceutical ingredient 4 specis and their analogues 17 specis were estimated using by HPLC/PDA, LC-MS/MS. The range of concentration of sildenafil in fake viagra was 40~199 mg/tablet, among them the portion of the concentrations of sildenafil over 150 mg/tablet exceeded 65%. 3 cases in tested samples contained sildenafil and tadalafil. The range of concentration of sildenafil in fake cialis was 102~249 mg/tablet, among them the portion of the concentrations of sildenafil over 150 mg/tablet exceeded 88%. One case in tested samples contained demethylhongdenafil (90 mg/tablet). These results indicate that there were many fake anti-impotence drug contained high level of anti-impotence pharmaceutical ingredients, a sustainable monitoring and the blocked distribution of fake anti-impotence drugs recommended.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.1
• /
• pp.6-11
• /
• 1989

Some distinctive defects in the conventional stow net were examined and presented in the previous report of this series. To find out the more effective gear by correcting the defects, the authors carried out another experiment by using a newly designed gear. 1. Special features of the newly designed gear are: (1) stretched width of front end on top, bottom and side panel are decreased 20%, on the other hand, the frank of the panels are increased 10% compared with the conventional gear. Front end of top and bottom panels are bias cutten up to 20% of the length of panels. (2) Length of the head rope and ground rope are shortened 6% by changing of the shape of the top and bottom panels. (3) Lacing lines are attached to four longitudinal seaming lines with suitable hanging ratio. (4) Stretched height of the shearing device were shortened 17%, and the buoyancy on top of the device were increased 20%. (5) Length of the biforked pendants were arranged to be shorter on top-most and bottom-most ones, and loner on middle ones. 2. The observed result can be expressed as (1) Wrinkles in the front end of top panels are removed and fringe line of panels become smooth. (2) Opening height of mouth is observed 3% higher than that of the conventional gear. (3) Opening width is 1.5 to 1.6 times wider than that of the conventional gear. (4) Hydrodynamic resistance is decreased 10%-17%.

• Korean Journal of Food Science and Technology
• /
• v.12 no.2
• /
• pp.103-108
• /
• 1980

To study the effects of diets containing red Ginseng, rats were fed diets containing various amounts of red Ginseng for 10 weeks. The Ginseng diets were 600 mg of red Ginseng extract concentration, 1,200 mg of red Ginseng powder, 6,000 mg of red Ginseng tea, 3,000 mg of red Ginseng extract concentration, 6,000 mg of red Ginseng extract concentration, 12,000 mg of red Ginseng extract concentration per Kg of diet, and control. As results, growth rate, feed efficiency ratio, organ weight, and hematocrit value showed no statistically significant differences between red Ginseng fed animals and the controls. Serum cholesterol level and GPT were slightly lower in the experimental animals than those in the controls. These differences, however, were not statistically significant. Serum GOT activities for all experimental animals showed no statistically significant except for Group fed with 6,000 mg of red Ginseng extract concentration per Kg diet. This Group revealed significantly lower GOT activities than those of the controls statistically. No abnormalities of liver, spleen, and kidney were observed in the experimental animals.

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.109-120
• /
• 2021

Global warming due to increased carbon dioxide is perceived as one of the factors threatening the future. Efforts are being made to reduce carbon dioxide emissions in each industry around the world. In particular, environmental loads and impacts during the life cycle of SOC structures and buildings have been quantitatively assessed through a quantitative method called Life Cycle Assessment (LCA). However, the construction sector has gone through difficulty in quantitative assessment for several reasons: 1) LCI DB is not fully established; 2) the life cycle is very long; 3) the building structures are unique. Therefore, it takes enormous effort and time to carry out LCA. Rather than estimating carbon emissions with accuracy, this study aims to present a simplified estimation model that allows owners or designers to easily estimate carbon dioxide emissions with little effort, given that rapid and rough decisions regarding environmental load reduction are to be made. This study performs the LCA using data from 25 road construction projects across the country, followed by multiple regression analyses to derive a simplified carbon estimation model (SLCA). The study also carries out a comparative analysis with values estimated by performing a typical LCA. The comparison analysis shows an error rate of less than 5% for 16 road projects.

• Journal of Service Research and Studies
• /
• v.8 no.3
• /
• pp.97-114
• /
• 2018

This study was intended to empirically examine the influence that the omni-channel brand experience would have on omni-channel brand relationship formation and achievements. All hypotheses were adopted, except for 1 hypothesis(Hypothesis 5), among 12 hypotheses. Specific results were as below: First, omni-channel brand experience had a positive(+) influence on brand trust(Hypothesis 1), brand identification(Hypothesis 2), and consumer-brand relationship(Hypothesis 3) as a whole. The brand trust had a positive(+) influence on brand identification(Hypothesis 4), but did not have statistically significant influence on consumer-brand relationship(Hypothesis 5). Meanwhile, brand identification had a positive(+) influence on consumer-brand relationship(Hypothesis 6). Second, consumer-brand relationship had a positive(+) influence on re-purchase intention(Hypothesis 7), word-of-mouth intention(Hypothesis 8), and brand extension acceptability(Hypothesis 9) as a whole. Finally, omni-channel brand showed the following relationship with and achievements. re-purchase intention had a positive(+) influence on both word-of-mouth intention(Hypothesis 10) and brand extension acceptability(Hypothesis 11) while word-of-mouth intention had a positive(+) influence on brand extension acceptability. The results of this study may provide theoretical and practical implications for marketing managers' understanding and strategy planning in connection with consumer experience and relationship formation promoted recently by omni-channel brands of distribution companies.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.123-136
• /
• 2019

This study examines the effect of collector well installed to reduce groundwater level in the regions with the occurrence of landcreep, a soil mass movement triggered by instability on slopes. Slopes are prone to failure as a result of instability caused by its internal, topographic and geological properties as well as due to external factors such as rainfall and earthquake. In Korea during the rain season, rainfall infiltration affects the groundwater level in soil, building up porewater pressure and load, and finally drives slopes to collapse. Slope failure caused by rainfall infiltration has been leading to a drastic forest degradation. The studied slope is located adjacent to a valley, its terrain corresponds to piedmont gentle slope, while the upper part of the failure surface is steep. After reinforcing the terrain where landcreep had occurred and installing collector well on the slope, we measured the changes in the groundwater level. In order to analyze the relationship between the well and the slope, we calculated the ratio of groundwater level to rainfall before and after the installation of the collector well. As a result, it is confirmed that the ratio increases after the installation of the well, which in turn reduces the groundwater level. Analysis of the change in groundwater level after 3, 7, 15 days antecedent rainfall showed that the higher the overall groundwater level, the less the value ($r_p$) of groundwater level-rainfall ratio is, while the value becomes relatively greater when the groundwater level is low. In particular, if a slope has a large catchment basin as is in the case of the studied site, antecedent rainfall affects groundwater level in the order of 3 < 7 < 15 days.

• Membrane Journal
• /
• v.29 no.5
• /
• pp.263-275
• /
• 2019

In the present study, thickness of MOR zeolite membranes was controlled by changing seed size, seeding amount, and aging time of hydrothermal solution, and then effect of membrane thickness on pervaporative ethanol dehydration for 90 wt.% ethanol-water mixture was investigated. First, nanosize MOR zeolite seeds with a diameter of 20 to 30 nm was successfully prepared by planetary milling a laboratory synthesized MOR zeolites and the coating amount was controlled by seed concentration and infiltration volume of coating solution during vacuum-assisted seeding. As seeding amount decreased, membrane thickness was reduced up to around $4{\mu}m$. The MOR zeolite membrane having a thickness of $4{\mu}m$ showed a water/ethanol separation factor of 760 and water flux of $1.0kg/m^2h$. The excellent water flux was due to the reduced membrane thickness which was derived from the nanosize seed. Therefore, it could be concluded that membrane thickness control by using nanosize seed can be a crucial factor to improve pervaporative water flux of MOR zeolite membrane.