• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.246-250
• /
• 2000

The oral screen is a functional appliance, suitable for the treatment of developing malocclusion associated with aberrant muscular patterns. The better muscle balance between tongue and the buccinator mechanism can be established, and the reestablishment of normal growth and development can be achieved. The oral screen can be used for the correction of the following conditions : (1) thumbsucking, tongue thrusting and lip biting, (2) mouth breathing, (3) mild distocclusion with premaxillary protrusion, (4) open bites in deciduous and mixed dentition, and (5) incompetent lips. The patient should wear the oral screen every night and also during the day whenever possible. The effects of oral screen can be elevated through lip seal exercise : the lips should be kept in contact all the time to improve the lip seal. In the presented two cases, the patients were considered mouth breathers and to have incompetent lips, and one patient with maxillary incisal protrusion and the other with open bite. They were instructed to wear the oral screen with lip seal exercise. After wearing the appliance for 1 and 2 years respectively, mouth breathing was decreased and lip length and strength were increased, the maxillary incisors were retruded and open bite reduced.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.210-216
• /
• 2003

The double teeth include gemination and fusion. The congenital missing tooth is the absence of the tooth. The purpose of this study was to investigate the prevalence of double teeth and congenital missing teeth in preschool children of Iksan city. The study population consisted of 1,031 children, 569 boys and 462 girls, aged from 17 to 84 months. The double teeth possess a variety of diagnostic and treatment problems. Gemination is the partial splitting of a single bud into two distinct entities that remain joined in a Siamese twin fashion. Fusion is the joining of two buds. Both may be normal, or one may be a supernumerary tooth. Congenital missing is the absence of one or a few teeth. Twenty three(11 boys and 12 girls) of the 1,031 children had double teeth and 17(8 boys and 9 girls) exhibited congenital missing of teeth. The prevalence of double primary teeth was 2.2%. The prevalence of congenital missing teeth was 1.6%. One subject had double teeth and congenital missing tooth at the same time. Of the 17 cases of congenital missing teeth, one girl showed it in the maxilla and aye boys and six girls had them in the unilateral side of the mandible. There were no significant differences in the prevalence of double teeth and congenital missing teeth between the boys and the girls.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.44-50
• /
• 2005

This paper deals with the characteristics and reduction methods of the plasma luminosity caused between the ZnO surge arrester block and metal electrodes. In this study, the impulse current generator that can generate $8/20[{\mu}s]$ impulse currents with a peak short-circuit of 10[kA] is designed and fabricated. Plasma luminosity phenomena for fine and used ZnO blocks were observed as a function of the contact states between the ZnO block and electrodes and the polarity of applied impulse voltages. As a result, discharge luminous events are produced near the contact edges between the ZnO block and metal electrodes. The discharge plasma luminosity between the ZnO surge arrester block and low potential electrode is more intensive than that between the ZnO surge arrester block and high potential electrode. Surface flashover of ZnO blocks are mainly caused by plasma generation near the edge of metal electrode. Also, plasma luminosity for the fine ZnO blocks is less than that for the used ZnO blocks. Plasma luminosity at the contact of the ZnO block and ring-type electrode is more intensive than that at the contact of ZnO block and disk electrode. It is desirable to use the disk electrode with the proper contact area to reduce the plasma luminosity caused at the contact point between the ZnO block and electrodes.

• Journal of Yeungnam Medical Science
• /
• v.24 no.2
• /
• pp.232-242
• /
• 2007

Background : The safety and efficacy of trabeculectomy with Mitomycin C (MMC) for surgical treatment in aphakic and pseudophaic eyes were retrospectively evaluated. Materials and Methods : The authors reviewed 51 eyes of 45 patients who had been followed up for at least 6 months after trabeculectomy using MMC for aphakic and pseudophakic eyes. The success rate and complications were analyzed. The success criteria included intraocular pressures of 21 mmHg or less with or without glaucoma medications and no loss of light perception. Surgical failure was defined as a postoperative loss of light perception in patients with preoperative vision better than light perception, additional glaucoma surgery, or phthisis bulbi in patients with preoperative vision of no light perception. Results : The average follow up period was 27.7 months and the intraocular pressure was controlled under 21 mmHg in 36 eyes of 51 (70.6%) after the procedure with or without medication for glaucoma. Using the Kaplan-Meier survival analysis, the cumulative success rate at the 3-, 6-, 12-, 24- and 36-month intervals were 98.0%, 94.1%, 91.9%, 83.4% and 75.5%, respectively. The complications observed were hyphema (4 eyes), serous choroidal detachment (4 eyes), hypotony (3 eyes), and endophthalmitis (1 eye). Conclusion : Trabeculectomy using Mitomycin C for the treatment of aphakic and pseudophaic eyes was safe and effective.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.717-724
• /
• 2017

To improve the running safety of a tram operating on a concrete embedded track, a bogie, the core system of the tram, was developed and fabricated. After it was integrated with the prototype car body, a short distance track with a sharp curve and steep gradient was constructed for the test operation. A formula to check the interference of the wheel flange with the track during running was proposed. Based on the results provided by the formula, the track was designed. Another simple formula was derived to estimate the derailment quotient and the wheel unloading ratio. During running on the track, the acceleration of the car body was measured and the interface status between the wheel and the track was monitored by a video system. According to the results calculated by these simple formulas, the derailment quotient and wheel unloading ratio were estimated to be within the safety criteria. In the actual test, no derailment occurred and the measured acceleration satisfied the criteria. Also, there was no interference between the wheel and track. The video monitoring results showed no signs of derailment, such as the climbing of the wheel. The pinion in the center showed good running safety, contacting smoothly with the rack. The measurements of environmental noise proved that the criteria were satisfied.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.2
• /
• pp.135-145
• /
• 2004

A zeolitic bentonite, which exhibits whitish appearance and contains considerable amounts (nearly 〉 5%) of zeolites, frequently occurs as thin beds less than 1 m in Yeongil area. The bentonites are mostly found in closely association with zeolite beds in the Nuldaeri Tuff and Coal-bearing formations of the Janggi Croup. A discordant occurrence of the bentonite against the bedding plane is also locally found. Montmorillonite, the major mineral constituent of the bentonite, is mostly associated with clinoptilolite as a zeolite. However, instead of clinoptilolite, mordenite is sometimes included in the case of more silicic bentonite, and heulandite in the less silicic one. It is characteristic that the mordenite is accompanied by lots of opal-CT in the silicic bentonite. SEM observations characteristically indicate that these authigenic phases, especially the montmorillonite and zeolite, nearly coexist as mixtures not forming a fine-scale zoning. The zeolitic bentonite seems to be formed in the comparatively silicic pore fluid at the alkaline condition accompanying pH fluctuation Compared to the zeolite-free normal bentonite, the zeolitic types exhibit somewhat higher REE abundance. These chemical characteristics, together with modes of occurrences and authigenic mineral associations, may suggest that the zeolitic bentonite is not merely diagenetic products and a possible hydrothermal alteration could not be excluded in the bentonite genesis.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.724-734
• /
• 1999

The adhesion characteristics of the thermoplastic resins such as PE, PP PVC, PET and PS were investigated on the surfaces of conventional steel (SS41), steel (SS41P) treated with ultrasonic waves and the SS41P coated with several ceramic powders (SS41PC) by the plasma spray. Alumina (Al$_2$O$_3$), alumina titania (Al$_2$O$_3$95%, TiO$_2$ 5%) and zirconia yttria (ZrO$_2$ 95%, $Y_2$O$_3$5% ) were used for the materials plasma spray The morphologies, surface hardness, surface roughness, and contact angles on SS41, SS41P, and SS41PC were examined. The tensile shear strength and peel strength of the polymers which were attached to the surfaces of ceramics coated on SS41P also were measured. The tensile shear strength and peel strength of polymers adhered to ceramic surface coated on steel were found to be stronger than those of conventional steel. The tensile shear strength and peel strength of the polymers adhered on the surfaces of ceramics coated steel increased in the following order PE > PET > PP > PS > PVC. The high adhesion strength of PE may be attributed to the surface roughness and its anchor effect on the ceramic surface.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.40-45
• /
• 2006

The baculovirus-insect Drosophila melanogaster S2 cell system combines advantages of conventional baculovirus system and non-lytic S2 cell system because baculoviruses can infect non-permissive cells such as mammalian and Drosophila S2 cells but cannot replicate themselves inside the cells. In the present work, we investigated effects of infection conditions on production of green fluorescent protein (GFP) as a target protein using this baculovirus-S2 cell system. Even though higher MOI and longer baculovirus contact time showed better GFP expression yield during the shorter period, overall protein yield could be lower during the longer period due to the relatively higher cell detachment and lysis (lower cell viability). In addition, maintaining high MOI will be not practical for large-scale cell culture. Therefore, instead of maintaining high MOI, we found that high initial cell number and concentrated (10X) baculovirus volume can confer comparable protein expression even under the moderate MOI condition. Also, we found that the post-infection time that is connected to state of cells after infection was an important factor for production yield.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7219-7226
• /
• 2015

The purpose of this study was to examine the relationship of 22 selected variables for the sexual quality of life(SQOL) of married men and women in their 40s in an effort to lay the foundation for the development of intervention programs geared toward promoting the sexual health of married middle-aged men and women. The selected variables were eight demographic ones, eight sex-related ones and sex marital relationship ones. The subjects in this study were the visitors of four different health examination centers in Seoul. Two of the health examination centers were located in the region of Gangnam, and the others were located in the area of Gangbuk. After a survey was conducted from January 19 to March 5, 2015, the answer sheets from 187 respondents who were aged between 40 and 49 were analyzed. As a result, academic credential(p<.05), health status(p<.001), duration of marriage(p<.01) and monthly mean income(p<.01) were identified significant demographic variables to affect the sexual quality of life. Among the sex-related variables, the level of sex knowledge(p<.01) and exposure to pornography exercised(p<.001) and the husband's participation in delivery(p<.001) had a significant influence the sexual quality of life. All the variables of marital relationship that were marital dilemma(p<.05), the frequency of sexual relations(p<.001), love toward the spouse(p<.001), overall family harmony(p<.001), nonsexual communication(p<.001) and sexual communication(p<.001) had a significant impact on the improvement of the sexual quality of life. In conclusion, the variables of marital relationship were found to have been more important factors to affect the improvement of the sexual quality of life than the demographic and sex-related ones.

• Research in Plant Disease
• /
• v.15 no.3
• /
• pp.202-208
• /
• 2009

The genetically modified leaffolder-resistant (Cry1Ac1) rice plant was evaluated for the changes of resistance by comparing the occurrence of major diseases with a japonica type Korean rice variety, Nakdong which was the mother plant of the transgenic rice event, in greenhouse and field conditions. There was no difference in the occurrence of sheath blight and Helminthosporium blight between the two varieties in the fields. We couldn't find any difference of resistance for fungal blast and bacterial leaf blight by artificial inoculation in greenhouse. There was also no difference in the susceptibility to sheath blight in artificial inoculation tests confirming the results in the fields. The possibility of gene transfer of Bar and Cry1Ac1 from the genetically modified rice plant to naturally infected pathogens such as Fusarium moniliforme and Pyricularia oryzae in the field conditions was tested by PCR. And the possible transfer of those genes by continuous inoculation of Xanthomonas oryzae pv. oryzae and Rhizoctonia solani was also tested. However, we couldn't find any possibility of transfer of the genes in natural and artificial conditions.