• Tunnel and Underground Space
• /
• v.16 no.6 s.65
• /
• pp.451-466
• /
• 2006

Analysis of slope behavior concerning the structural characteristics of field rock mass can be processed by virtue of borehole information of joint orientation and position acquired from DOM drilled core. Anticipated sliding potential of pre-failed rock slope is analyzed and the regional slope instability is investigated by inspecting the hazardous joints and blocks the traces of which is projected on the cut-face. Cross section has been set at the center of rock slope and the traces of both joints and tetrahedral blocks, which potentially can induce the slope failure, are drawn to investigate the failure modes and the triggering mechanism. Automated monitoring system has been established to measure the slope movement and especially, inclinometer has been installed inside DOM borehole to analyze the slope movement by considering the internal rock structure. Algorithms for predicting the slope failure time have been reviewed and the significance of heavy rainfall on the slope behavior has been investigated.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.15-27
• /
• 2004

Sliding aspects of rock slope, where large-scaled tension cracks are induced during preliminary excavation, have been analyzed. Structure of rock mass is investigated by performing the electrical resistivity survey and the orientations and positions of discontinuities are measured from DOM-drilled core log. Geological evidence far primary failure movement has been detected and clay minerals which possess swelling properties are identified through XRD analysis. Slope stability is examined by considering the orientations of discontinuities and their trace distributions on the cut-face and neighboring natural slope surface. Both orientations and positions of failure-invoking discontinuity planes, traces of which are exposed within the anticipated sliding region, are concerned fur analyzing the preferred sliding directions. Regional sliding vectors are assessed based on the relative positions of potential sliding planes in the boreholes and the general trend of anticipated failure movement of rock slope is also investigated.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.608-610
• /
• 2009

지열 분포에 관련된 지질구조의 특성을 파악하기 위하여 지온경사, 지열류량 자료와 인접한 선구조의 방향성에 대한 상관성 분석을 실시하였다. GIS를 이용하여 지열정보데이터베이스에서 발췌한 209개 지온경사 자료와 218개 지열류량 자료에 대하여 전국 광역단열도로부터 가장 인접한 선구조를 추출하고 10도 간격의 방향별 지온경사 및 지열류량 자료 빈도 및 평균값을 그래프에 도시하였다. 인접 선구조의 방향별 지온경사 평균은 $N30^{\circ}{\sim}40^{\circ}W$, $N10^{\circ}{\sim}20^{\circ}E$ 방향에서 $58.9^{\circ}C/km$, $54.9^{\circ}C/km$로 가장 높았고, 인접 선구조의 방향별 지열류량 평균은 $N80^{\circ}{\sim}90^{\circ}W$, $N50^{\circ}{\sim}60^{\circ}W$ 방향에서 98.71 $mW/m^2$, $98.70mW/m^2$로 가장 높았다. 각 선구조 상의 좌표들을 이용하여 지열류량 분포도에서 지열류량 값을 추출한 결과 $N10^{\circ}W{\sim}N40^{\circ}E$, $N60^{\circ}{\sim}70^{\circ}W$, $N50^{\circ}{\sim}60^{\circ}E$ 방향의 지열류량 높은 것으로 나타났다. 결과적으로 지온경사와 지열류량 자료에 대한 인접 선구조의 방향은 북북동, 북서, 서북서 방향이 우세한 것으로 나타났다. 이는 우리나라 조구조 운동과 관련한 단층, 절리 등의 단열구조의 우세 방향과 잘 일치하는 것으로 해석된다.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2012

The purpose of this work is to gain a better understanding of the interrelationships between geological structures and slope failure in sedimentary rocks. In the studied slopes, construction-related slope failure could only be observed on the south-dipping slopes. This indicates that slope stability may be dependent on the angular relationships between the dip direction of bedding and the orientation of the slope. Slope failure continued, post-construction, around large fault zones in the studied outcrop; these fault damage zones are, however, not easily recognized in the field. Here we suggest a new method that uses accumulated fracture density to precisely identify fault damage zones. Multiple-faced slopes are now increasingly being exposed during large-scale construction projects in South Korea. This multiple-faced slope analysis indicates that the stability of a slope should be evaluated by identifying domains, through the analysis of possible slopes and their angular relationships with bedding and other discontinuities, prior to construction. Therefore, careful consideration of geological structures such as bedding and other discontinuities, and their angular relationships during the design of cuttings through sedimentary rocks, will increase the efficiency of construction and enable the safe construction of more stable slopes that will retain their stability after construction.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.78-91
• /
• 2018

Sangjogam, located in Goseong, Gyeongsangnam-do, was designated as Natural Monument #411, because of its diverse geological heritage, such as fossils, ripple marks, dykes, and columnar joints. In the area, Byeongpungbawi, with its beautiful columnar joints vertical to the bedding plane of the underlying sedimentary rocks and spectacular coastal view, was named after its overall shape reminiscent of a huge folding screen. The purpose of this study was to investigate the formation process of the columnar joints using the anisotropy of magnetic susceptibility (AMS) method. AMS measurements showed that the k1 and k3 values representative of directions of the long and short axes of a magnetic particle at each point strongly clustered, and the oblate magnetic foliation structure in Byeongpungbawi developed during sill-type intrusion rather than lava flow. In summary, Byeongpungbawi was produced by sill-type intrusion along the bedding plane of the underlying sedimentary layer, and the subsequent formation of columnar joints was accompanied by the cooling and contraction of intruding rhyolite magma. This study potentially provides a basic research tool in understanding the formation mechanism of columnar joints which are widely distributed in southern Korea.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.713-727
• /
• 2009

절토비탈면의 붕괴는 주로 지질구조 적으로 취약한 구간에서 강우, 지진, 발파진동, 굴착 등의 외적인 요인이 작용하였을 때 비탈면의 붕괴가 수반되는 경우가 많으며 내적인 요인으로 작용하는 지질구조는 구조선의 종류에 따라 붕괴규모나 붕괴양상에서 상당한 차이를 보이는 특성을 보인다. 특히, 비탈면 붕괴는 단층이나 점토가 충전된 구조선에서 문제가 많이 발생되고 방향성이 뚜렷한 엽리 및 절리에서 붕괴가 빈번한 실정이다. 단층은 일반적으로 모든 암종에서 나타나는 지질구조이나 특히, 변성암중 편마암에서 붕괴빈도가 빈번하게 발생되고 점토층이 수반되는 경우에 심하다. 본 논문은 공사당시 비교적 규모가 크게 붕괴가 발생된 붕적층 절토 비탈면과 단층파쇄대 및 암질불량의 비탈면의 붕괴사례의 안정검토 사례를 소개하고자 한다.

• Journal of Wetlands Research
• /
• v.12 no.2
• /
• pp.1-12
• /
• 2010

This study examined geological characteristics of a wetland in Mountain Geumjeong in Busan Metropolitan City. Field survey and laboratory tests were performed to identify topographic features, geological and structural geological characteristics, rock strength along the distance from the wetland, soil profile in the wetland, and chemical property of the wetland soil. The bedrock of the wetland consists of hornblende granite. Hornblende granite and rhyolitic rock around the wetland have the joints with strikes of N-S, E-W, and NE-SW directions and with higher dips greater than $60^{\circ}$. Lower rock strength and higher weathering grades take place towards the wetlands. According to X-ray diffraction analysis of wetland soil samples, kaolinite, montmorillonite, and gibbsite appear which demonstrate weathered products of feldspars in the hornblende granite. The soil profile in the wetland comprises O, A, B, and C horizons from the land surface. The contents of the organic matters decrease from shallow parts to deeper parts of the soil profile. In addition, $K^+$ and $Na^+$ originating from the weathering of feldspars are dominant components among inorganic ions in the wetland soil.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.2
• /
• pp.91-105
• /
• 2015

Jungtaesan and Galpyeongji intrusions in the northeastern Cheongsong occur as laccolith and stock which intrude Gasongdong Formation and Dogyedong Formation, respectively. Cheongsong dike swarm, intruding the Dogyedong Formation, is closely associated with this stock. The dike swarm is more radial to focus into Galpyeongji and its outline is oval. The dikes of the dike swarm are only rhyolite dikes with flow banded, spherulitic and rare stony structures, and represents a single intrusive phase of magma. It can be interpretated that orientation of the dikes is controlled by stress states. Therefore, the dikes display a radial pattern through occupying vertical joints that have been generally attributed to radial fractures formed during doming of the sedimentary rocks by the intrusion of the Galpyeongji stock. The dike pattern could sufficiently account for dike injections into these joints.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.67-70
• /
• 2001

터널 굴착에 따른 연구지역내 지하수체의 거동 특성을 파악하기 위하여 터널 굴착시 그라우팅 이전의 초기 유출량과 초기 그라우팅 이후의 구간별 유출량을 측정하였고 단열구조와 비교, 분석하였다. 초기 유출량은 120,990 m$^3$/day이며, 초기 유출이 심했던 구간은 크게 6개 구간으로 세분할 수 있다. 초기 그라우팅 후 지하수 유출이 심했던 구간 역시, 그라우팅 이전과 마찬가지로 6개 구간으로 세분할 수 있다. 그라우팅 전, 후의 유출량을 비교해 보면 그라우팅후의 유출량은 42,844m$^3$/day으로, 그라우팅 전에 비해 많이 감소되었다. 터널 굴착시 터널내로 유출되는 지하수의 대부분은 터널과 직교 혹은 사교하여 관통하고 있는 단층 및 단층 파쇄대와 연장성이 양호한 절리면들을 따라서 유동되고 있다. 터널내의 지하수 유출에 영향을 미치는 단열들은 대체로 4조의 불연속면군으로 분류 할 수 있는데, 주 분포방향은 크게 TSet 1 : N60-85$^{\circ}$W, TSet 3 : N40-50$^{\circ}$E, TSet 3 : N10-20$^{\circ}$E, TSet 4 : N70-80$^{\circ}$E이다.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.39-52
• /
• 2014

Limestone caves that consist of main passages and branches are formed by a variety of processes, and have the characteristic of developing with a preferred orientation controlled by discontinuities such as bedding, joints, and faults around the cave. However, it is difficult to analyze a representative orientation from various orientations. To interpret the overall development orientation of limestone caves, this study proposes new development orientation analysis methods, termed the Average Span Ratio Method (ASRM) and the Individual Development Ratio Method (IDRM), using the weighting of persistence. Nine limestone caves in Korea were randomly selected for testing the new methods. The methods show a stronger development orientation for limestone caves than that obtained by traditional methods, which consider only the distribution of development orientations. Based on an analysis of the relationship between the average span and the dip angle of bedding, it is confirmed that shallowly dipping bedding is a major contributor to the expansion of span in limestone caves. In addition, using scan-line survey data acquired in the field, we perform an RMR analysis of stability of the ground around limestone caves.