Journal of the Korean Geotechnical Society (한국지반공학회논문집)

Korean Geotechnical Society (한국지반공학회)
권호 표지

An Analysis of the Behavior of Rock Slope with Excavation-Induced Tension Cracks Located in DongHae Highway Construction Site

개착과정에서 인장균열이 발생된 동해고속도로 건설현장 암반사면의 거동 해석

  • 조태진 (부경대학교 환경ㆍ해양대학 환경탐사공학과) ;
  • 이창영 (지오텍컨설탄트(주)) ;
  • 고기성 (LG건설)
  • Published : 2004.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Sliding aspects of rock slope, where large-scaled tension cracks are induced during preliminary excavation, have been analyzed. Structure of rock mass is investigated by performing the electrical resistivity survey and the orientations and positions of discontinuities are measured from DOM-drilled core log. Geological evidence far primary failure movement has been detected and clay minerals which possess swelling properties are identified through XRD analysis. Slope stability is examined by considering the orientations of discontinuities and their trace distributions on the cut-face and neighboring natural slope surface. Both orientations and positions of failure-invoking discontinuity planes, traces of which are exposed within the anticipated sliding region, are concerned fur analyzing the preferred sliding directions. Regional sliding vectors are assessed based on the relative positions of potential sliding planes in the boreholes and the general trend of anticipated failure movement of rock slope is also investigated.

개착과정에서 대규모 인장균열이 발생한 암반사면의 파괴거동 양상을 분석하였다. 사면지역 암반의 구조적 특성분석을 위하여 전기비저항 탐사를 수행하였으며, DOM 시추작업을 수행하여 불연속면의 방향성과 시추공 내의 출현위치를 측정하였다. 회수된 코어를 관찰하여 개착면 및 인근 자연사면의 파괴 거동이 진행되었을 것으로 추측되는 예상 활동면의 존재성을 확인하였으며, 협재된 팽윤성 점토광물의 조성을 XRD 회절분석을 통하여 조사하였다. 사면 안정성 분석은 사면지역에 표출되는 절리들의 trace 분포 및 방향성을 고려하여 수행하였으며, 사면파괴를 유발시킬 수 있는 절리들의 시추공 내에서의 위치 및 방향성에 의거하여 심도별 지반 거동특성을 분석하였다. 시추공 별 예상 파괴 활동면의 3차원 위치 좌표에 의거하여 구역별 거동 벡터를 산정하고 예상되는 전체적 인 사면거동 양상을 고찰하였다.

Keywords

References

  1. 황진연, 김선경, 김춘식 (1999), '부산시 문현동 산사태지역의 지질 및 점토광물에 대한 연구', 한국지반공학회지, 제15권, 제1호, pp.113-125
  2. Barton, N., Bandis, S. C. and Bakhtar, K. (1985), 'Strength, deformation and conductivity of rock joints', Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., Vol.22, No.3, pp.121-140 https://doi.org/10.1016/0148-9062(85)93227-9
  3. Einstein H. H., Veneziano D., Baecher G. B. and O'Reilly K. J. (1983), 'The effect of discontinuity persistence on rock slope stability', Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., Vol.20, pp.227-236 https://doi.org/10.1016/0148-9062(83)90003-7
  4. Hoek, E. and Bray, J. (1974), Rock Slope Engineering. The Institution of Mining and Metallurgy, London
  5. Lajtai, E. Z. (1969), 'Strenght of discontinuous rock in shear', Geotechnique, Vol.19, pp.218-233 https://doi.org/10.1680/geot.1969.19.2.218
  6. McMahon, B.K. (1968), 'Indices related to the mechanical properties of jointed rock', Proc. 9th Symp. Rock Mech., Colorado, pp.117-133
  7. Mahtab, M. A. and Yegulalp, T. M. (1982), 'A rejection criterion for deftnition of clusters in orientation data', Proc. 22nd Symposium on Rock Mechanics, R. E. Goodman and F. E. Heuze ed., Berkeley, pp.116-23
  8. Oda M. (1982), 'Fabric tensor for discontinuous geological materials', Soils and Foundations, Japanese Society of Soil and Foundation Engineering, Vol.22, No.4.
  9. Raax (1997), Borehole Image Processing System Information. Sapporo, Japan
  10. Read, S., Richards, L. and Cook, G. (2003), 'Rock mass defect patterns and the Hoek-Brown failure criterion', Proc. 10th Cong. ISRM, South Africa
  11. Scheidegger, A.E. (1965), 'On the statistics of the orientation of bedding planes, grain axes, and similar sedimentological data', U.S. Gelogical Survey Prof. Paper 525-C, pp.164-167
  12. Watson, G.S. (1966), 'The statistics of orientation data', Journal of Geology, Vol.74, pp.786-797 https://doi.org/10.1086/627211
  13. Woodcock, N. H. (1977), 'Specification of fabric shapes using an eigenvalue method', Bulletin of the Geological Society of America, Vol.88, pp.1231-1236 https://doi.org/10.1130/0016-7606(1977)88<1231:SOFSUA>2.0.CO;2
  14. Yoon, K.S., Cho, T.F., You, B.O. & Won, K.S. (2003), 'A new approach for borehole joint investigation - Development of Discontinuity Orientation Measurement drilling system', Proc. 10th Congo. ISRM, South Africa
  15. Zemanek, J. and Caldwell, R. L. (1969), 'The Borehole Televiewer - A new logging concept for fracture location and other types of borehole inspection', J. of Petroleum Technology, pp.762-774