• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06b
• /
• pp.281-285
• /
• 2008

본 논문에서는 임의의 두 얼굴간의 얼굴 변형을 시뮬레이션하는 방법으로서 직선형 경로를 이용한 얼굴 모핑 알고리즘을 소개한다. 이 때 두 얼굴 모델은 서로 독립적으로 3D 스캔되어 텍스처매핑을 거쳐서 생성된 별도의 3D 모델로서, 본 알고리즘은 이러한 얼굴 모델들간의 버텍스와 폴리곤의 개수와는 상관없이 자연스러운 모핑을 구현하는 특징을 갖는다. 알고리즘의 주요 기능으로는 절단면의 생성, 3 차원 메쉬의 2D 메쉬화, 대응 영역의 설정, 대응 폴리곤 탐색 및 보간 데이터 추출등이 포함된다.

• Korean Journal of Crystallography
• /
• v.10 no.1
• /
• pp.20-27
• /
• 1999

CaF2 단결정을 흑연도가니를 사용하여 He 분위기 하에서 탄만법으로 성장시켰다. 수화방지를 위해 PbF2를 출발물질에 도포하였다. 열구배에 따른 계면의 움직임인 성장속도는 배플판에 의해 성공적으로 조절되었다. 결정성장의 최적조건은 온도구배가 37℃/cm, 냉각속도가 10℃/hr 및 2.5tw% PbF2를 사용한 경우로, 성장속도는 약 3.2 mm/hr이었으며, 위로 볼록한 고액계면을 갖는 단결정이 성장되었다. IR분석 결과, 1500∼4000 cm-1(6.7∼2.5 ㎛)영역에서 약 96%의 투과도를 보였다. 결함밀도를 측정하기 위해, 성장축에 수직 및 수평으로 절단한 면을 농축 H2SO4에서 약 30분간 에칭하여 간섭현미경으로 관찰한 결과, 각각 3.4×104/cm2였다. 이러한 결과는 수화에 따른 성장된 단결정의 투명도의 경향과 일치하였다. 결정에 대한 XRD분석 결과 우선성장 방향은 <311>이었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1546-1552
• /
• 1993

We proposed an adaptive block truncation coding(BTC) using gradient and a new initial value. We used gradient of sobel operator as a new category classification coefficient to reduce Jagged appearance at edge part. We defined a new initial value to reduce large quantization error in the 4-level quantizer block including edge part. By computer simulations, we showed that the proposed method less computation load, reduced jagged appearance at edge part, also improved PSNR more than the conventional adaptive BTC.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.316-317
• /
• 2000

펄스형 $CO_2$레이저는 적외선 영역인 10.6 $mu extrm{m}$ 파장의 매우 안정된 고출력 펄스를 방출시킬 수 있으므로 산업용, 군사용, 의료용, 각종 물리.화학의 기초 연구용 등의 광범위한 응용 분야에서 각광을 받고 있다. 특히 금속의 정밀절단, 심용접에서는 수 십 Hz로부터 수 kHz의 펄스 출력이 필요하다. 펄스방식은 Normal Pulse와 Super Pulse로 크게 나눌 수 있다. Normal Pulse의 경우에는 Pulse의 파고치가 연속파의 파고치와 동일하기 때문에 펄스시의 평균 출력은 연속파의 경우보다 낮다. Super Pulse의 경우에는 Pulse 파고치를 연속파의 파고치보다 훨씬 높게 할 수 있으므로 평균 출력은 낮지만 첨두 출력이 높아서 유리 등 세라믹 재료의 가공에 널리 사용된다$^{(1)}$ (중략)

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.197-202
• /
• 2015

A triangular fuzzy number is one of the most popular fuzzy numbers. Many results for the extended algebraic operations between two triangular fuzzy numbers are well-known. We generalize the triangular fuzzy numbers on $\mathbb{R}$ to $\mathbb{R}^2$. By defining parametric operations between two regions valued ${\alpha}$-cuts, we get the parametric operations for two triangular fuzzy numbers defined on $\mathbb{R}^2$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.94-97
• /
• 2008

현재 전주 국내에서는 전주에 대한 관심이 조금씩 증가하는 추세지만 그 활용 영역은 많지 않다. 최근들어 휴대폰 관련 부품과 LCD디스플레이의 핵심부품인 도광판 사출금형에 집중되어 있다. 본 연구에서는 반도체 웨이퍼 절단용 블레이드 제작을 목표로 Ni 전주도금층에 조밀하게 $Al_2O_3$를 분산시키는데 목표를 삼았다. 전주(electroforming)를 이용한 Ni-$Al_2O_3$를 첨가한 설파민산 니켈욕에 Surfactant의 양을 조절하며 Sodium Lauryl Sulfate의 첨가량이 많아질수록 Nickel 전주도금층 표면에 $Al_2O_3$는 접착되어지지 않고, 도금층의 두께는 두꺼워졌다. Surfactant의 첨가로인하여 Ni 전주도금층의 표면 장력이 감소하여 $Al_2O_3$를 감싸고 Ni 전주도금층이 성장하여야하는데 교반하는 과정에서 $Al_2O_3$ 입자들이 용액의 흐름에 따라 떨어져 나갔다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.481-486
• /
• 2011

The evaluation of supercooled water droplet impingement characteristics of full-scale aircraft components in wind tunnels under icing conditions has been severely limited by the relative size of the component and the test facility. The concept of truncated airfoil sections has been suggested in order to extend the operational range of icing tunnels. With proper deflection of the small trailing-edge flap on the truncated airfoil the local pressure distribution may remain very close to that of the full-scale airfoil. In this study the shape of a truncated flapped airfoil is investigated for various deflection angles. To validate the truncated flapped airfoils, air flow and collection efficiency over the truncated airfoil are compared with the results of the full-scale airfoil obtained from the state-of-the-art icing simulation code.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.525-531
• /
• 1998

A series of $LiNbO_3$ single crystals were grown by the Czochralski method from a congruent melt, a congruent melt with 0.05 mol% $Fe_2O_3$, a congruent melt with 6 wt.% $K_2O$ and a congruent melt with 6 wt.% $K_2O$ and 0.05 mol% $Fe_2O_3$ respectively. The growth of $LiNbO_3$ crystal from a congruent melt 6 wt.% $K_2O$ leads to nearly stoichiometric specimens. This is established by studying the following properties; XRD patterns, temperature dependences of the phase transition temperature, energy of the fundamental absorption edge, the shape of the absorption band of the $OH^-$vibration and linewidths of the ESR of $Fe_{Li}^{3+}$.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.469-485
• /
• 2016

The failure of rock mass around deep tunnel, different from shallow tunnel largely affected by discontinuities, is dominated by magnitudes and directions of stresses, and the failures dominated by stresses can be divided into ductile and brittle features according to the conditions of stresses and the characteristics of rock mass. It is important to know the range and the depth of the V-shaped notch type failure resulted from the brittle failure, such as spalling, slabbing and rock burst, because they are the main factors for the design of excavation and support of deep tunnels. The main features of brittle failure are that it consists of cohesion loss and friction mobilization according to the stress condition, and is progressive. In this paper, a three-dimensional numerical model has been developed in order to simulate the brittle behavior of rock mass around deep tunnel by introducing the bi-linear failure envelope cut off, elastic-elastoplastic coupling and gradual spread of elastoplastic regions. By performing a series of numerical analyses, it is shown that the depths of failure estimated by this model coincide with an empirical relation from a case study.

• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.315-323
• /
• 2016

This study reports a gneiss dome in the Hongseong area, southwestern margin of the Gyeonggi massif. This gneiss dome, named here as 'Oseosan dome' because it is located around the Oseosan, the highest peak along the western coastal area, is composed mainly of the Neoproterozoic to Paleozoic ortho- and paragneiss, mafic metavolcanic rock, and metadolerite. Migmatization affected these rock units, in which leucocratic(granitic) materials derived from anatexis frequently occur as patch and vein parallel to or cutting through internal foliation. The Oseosan dome shows overall concentric geometry and outward-dipping internal foliation, but also partly complicatedly changeable or inward-dipping foliation. Taking available petrological and geochronological data into account, the Oseosan dome is interpreted to be exhumed quickly into the upper crustal level during the Late Triassic, accompanied in part with anatexis and granite intrusion. In addition, extensional shear zone intruded by the Late Triassic synkinematic granite and sedimentary basin have been reported around the Oseosan dome. These evidences possibly suggest that the Oseosan dome formed in closely associated with the Late Triassic extensional movement and diapiric flow. Alternatively, 1) thrust- or reverse fault-related doming or 2) interference between independent folds during structural inversion of the Late Traissic to Middle Jurassic sedimentary basin can be also considered as dome-forming process. However, considering the northern limb of the Oseosan dome, cutting by the Late Traissic granite, and the southern limb, cutting by contractional fault reactivated after the Middle Jurassic, it is likely that the domal structure formed during or prior to the Late Triassic.