• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.43-43
• /
• 2011

현대인들은 생활환경에서 발생하는 각종 미세먼지 등의 입자상 오염물질 뿐만 아니라 각종 VOCs 등의 가스상 오염물질과 곰팡이, 박테리아, 바이러스 등 생물학적 오염물질까지 생활공간 내의 공기환경은 점점 악화 되고 있으며 공기 정화 등의 필요성이 증대 되고 있다. 이에 본 연구에서는 닥 펄프와 활성탄이 주성분인 Sheet를 Corrugation 장치를 통해 편파형(골판지)으로 제작하고, 다시 다층 구조로 적층된 골판지 sheet을 제작한 후 이를 두께 방향으로 일정 폭(20mm이하)으로 절단하여 필터부품의 소자로 이용하는 활성탄 필터의 제조 및 그 특성을 확인하고자 하였다. 닥펄프/펄프와 무기물의 혼합비, 해리시간 등의 변화를 주어 샘플을 만들었고, 강도, 평활성, 생산성 향상을 위해 첨가보조제 선정을 하였다. 이렇게 제조된 필터의 물리적 특성을 알아보고자 인장시험을 실시하였고, 주사전자현미경을 통하여 필터의 평활성과 표면을 관찰하였고 흡착성능 및 기능성을 VOCs 방출량, 탈취율, 항균도, 곰팡이 저항성 등의 실험을 통하여 알아보았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.126-130
• /
• 2002

This paper presents the basic concept of new solid freeform fabrication system using rapid prototyping method. The system could fabricate an arbitrary ceramic form by laser cutting, transferring, stacking, and sintering of each slide. The system consists mainly of laser apparatus. X-Y table, a slide transferring system, and electric oven. The system could fabricate an object that has smooth surface with comparatively short period of time. The system is effective in terms of its direct fabrication capability without second mechanical process. The fabricated shape could directly be used as part of a whole assembly and therefore its method could be applied to various application areas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.304-304
• /
• 2018

이변량 빈도해석은 일반적으로 고정지속기간 강우량에 대해 빈도해석하는 단변량 빈도해석에 비해 지속기간을 확률변수로 이용하여 강우량과 동시에 확률변수로 사용할 수 있다는 장점이 있다. 하지만 확률분포형의 차원이 증가하기 때문에 기존 단변량 빈도해석에서 요구되던 표본크기보다 더 많은 표본이 필요하다. 우리나라 강우관측소의 경우 오래된 관측소의 경우에도 기록년수가 60년을 넘지 않아 연최대계열로 확률표본을 작성할 경우 이변량 빈도해석을 수행하기에 부족할 수 있다. 따라서 본 연구에서는 Peaks Over Threshold (POT) 방법을 이용하여 적정 확률표본을 선택하는 연구를 진행하였다. 서울 기상청 지점의 강우자료로부터 최소무강우시간을 이용하여 모든 강우사상을 추출하였으며 각 강우사상의 강우량과 지속기간이 확률변수로 사용되었다. 기존에 알려진 POT 방법들과 Anderson-Darling 적합도 검정을 이용한 절단값 산정방법등을 적용하여 확률표본 개수의 변화에 따른 주변분포형의 적합도 검정과 이변량 확률모형의 적합성을 살펴보았다.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.115-121
• /
• 2002

This paper discussed to design system to overcome time, place and service limitation in the case of extracting traffic on active service in the ATM network. There are several specification in this system : for a remote control function, a real-time traffic extraction from ATM link on service without affect in-service, and an O&M(Operating and Maintenance) cost down effect. This paper include the requirement, module structure, operating characteristics and command for the developing function. This product installed at the KT's telephone office. And we have tested the stability, reliability and functionality. As the result, it was verified that this system commercially is abel to use without especial problem. Hereafter, we are improving module structure for the cost down.

• Korean journal of food and cookery science
• /
• v.26 no.1
• /
• pp.104-109
• /
• 2010

Korean Chinese cabbage (Brassica campestris L. ssp. pekinensis) is one of the major cruciferous vegetables. Cruciferous vegetables contain a series of relatively unique secondary metabolites of amino acids called glucosinolates. Although glucosinolates do not appear to be bioactive, they are hydrolyzed by plant myrosinase when the cells in plants are damaged, and release biologically active compounds such as isothiocyanates, nitriles, and thiocyanates. The objective of this study was to determine the myrosinase activity and total glucosinolate levels of Korean Chinese cabbages by different salting times (0, 12, 18, and 24 h) and salt concentrations (6, 10, 14%). The total water content, salt content, and pH of brined cabbages decreased with increasing salting time. The myrosinase activity as determined by a glucose kit, decreased with increasing salting time and salt content. The total glucosinolates were purified using an anion exchange column and measured by UV-visible spectrophotometer. The fresh Korean Chinese cabbages contained $25.38{\pm}1.45\;{\mu}mol/g$ dry weight of glucosinolates. However, the total glucosinolates of brined cabbages decreased with increasing salting time and salt concentration. After 24 h of salting time, the total glucosinolates of brined cabbages rapidly decreased by $16.12{\pm}11.09$, $11.25{\pm}10.91$, $9.29{\pm}10.73\;{\mu}mol/g$ in 6%, 10%, and 14% salt solution, respectively. Overall, the total glucosinolate levels of Korean Chinese cabbages were found to vary inversely with salting time and salt concentration.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.607-618
• /
• 2008

This study three-dimensionally and histologically assessed the effect of Emdogain$^{(R)}$ on periodontal healing in replanted teeth in three beagle dogs which were 1 to 2 years old, weighing from 10 to 13 ㎏. Twelve maxillary and mandibular incisors were intentionally extracted and replanted after 15(Group I), 30(Group II) and 60(Group III) minutes of air dry storage with and without the application of Emdogain$^{(R)}$. The following conclusions could be drawn from the present investigation. 1. Increased incidence of inflammatory healing response in periodontal tissue was proportional to air dry time in Both control and experimental group(P<0.001). 2. Treatment Group showed lower inflammatory root resorption, especially there were statically significant in Group I, III(P<0.001, Group II : P=0.093). 3. Inflammatory root resorption were mainly occurred in apical third(14, 15-16 section)(P<0.05, 0.001), and cervical third(1 section)(P<0.05). 4. In view of horizontal section of long tooth axis, Main root resorption area were 1, 4, 5 line area(bucco-lingual area)(p<0.01).

• Food Science and Preservation
• /
• v.21 no.5
• /
• pp.694-701
• /
• 2014

The quality characteristics of blanched Aster scaber with the blanching condition and various solutes (non-treated, NT; soluble Ca, SC; sodium bicarbonate, SB; and magnesium sulfate, MS) were evaluated with different blanching times and solutes. The blanching process decreased the total polyphenolics, ascorbic acid contents, hardness, and cutting strength of the leaves. As for the pectinesterase and polygalacturonase, the blanching process increased their inhibitory activities, and more than 90% of them were inactivated in all the samples that were blanched. For the total counts and the number of coliform groups, the number of total aerobes at 5.92-log CFU/g before the blanching process was reduced to the approximately 2-3 log scale, and the coliform group was not detected after the blanching. The blanching also significantly decreased the total chlorophyll a and b ratios. The sensory characteristics of the Aster scaber according to the test group showed that the leaves blanched for 3 min were the most highly evaluated in terms of their overall acceptability. The phenolic compound, chlorophyll, and carotenoid contents tended to increase from before their blanching, and the Ca/Cb ratio was higher in the SC. These results showed that SC and MS treatment had greater effects on the quality characteristics and the pigmentation.

• Korean Journal of Environment and Ecology
• /
• v.36 no.5
• /
• pp.496-506
• /
• 2022

The growth of trees planted through transplantation rapidly decreases immediately after planting due to extreme disturbances such as root cutting and crown damage. Although the growth rate is recovered as time elapses, the time required to restore the original growth varies by species. Therefore, it is necessary to set an appropriate tree management period for survival after transplantation by analyzing each species' annual growth change. In this study, we analyzed the growth amount of deciduous broad-leaf species planted in the area where the riparian ecological belt was formed and proposed the management period based on the results. Slowed growth immediately after planting is a common phenomenon due to root cutting and pruning, the pre-works performed to increase tree survival rate during the transplantation process. Afterward, the original growth rate is recovered as time passes, but the time required may vary depending on the species and planting environment. Most of the trees showed a rapid decrease in growth immediately after transplantation. After that, although it is different for each species, most of them showed a gradual recovery from 2 years onwards. The analysis of the growth rate by tree species confirmed that it took 2 to 4 years, depending on the tree species, to recover the growth level before transplantation after a rapid decrease in growth immediately after transplantation. The results suggest that improving the defect rate of planted trees is necessary to meet the project objectives: ecological restoration and pollutant reduction. It requires setting a tree management period of at least two years and creating an appropriate base environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.770-777
• /
• 2007

Smaller cell size in the micro-cell or pico-cell structure brings about more frequent hand-overs between cells, and higher speed movement of the mobile terminal makes short the permissible time interval for executing these hand-over procedures. In this situation the hand-over failure may occur or some packets may be lost during the hand-over. Moreover a rapid degradation of throughput is triggered by packet re-transmission for compensating such errors. The QoS (Quality of Services) of mobile multimedia applications with higher bits rate requirements and higher speed mobility are severely affected by even shot service interruption. This paper proposes a new hand-over scheme to provide seamless services in the next generation mobile communication systems. Simulation is done to evaluate the performance of the proposed scheme based on its hand-over failure rate and packet loss rate.

• Restorative Dentistry and Endodontics
• /
• v.29 no.1
• /
• pp.13-22
• /
• 2004

본 연구는 치수강 상아질 부위 및 상아질 접착제 종류에 따른 결합 강도를 측정하고 이들 사이의 상관관계를 구명하고자 시행되었다 45개의 대구치를 포매 후, 대조군에서는 교합면 법랑질 제거 후 ＃600 SiC paper까지 순차연마하여 상아질을 노출시켰고, 실험군에서는 치수강 개방 후 1시간동안 NaOCl에 보관 후 axial wall과 pulpal floor를 노출시켰다. 노출된 상아질 면에 상아질 접착제를 적용한 후 Z-100을 충전한 다음 40초간 광중합하였다. 사용된 상아질 접착제는 Scotchbond Multi-Purpose와 Single Bond, Clearfil SE Bond였다. $37^{\circ}C$ 증류수에 24시간 보관 후, 저속 diamond saw를 이용하여 0.7mm 두께로 수직절단하고 고속 diamond point(#104)로 단면적 $1{mm}^2$가 되도록 시편을 제작하고, Universal testing machine에서 미세인장 결합강도를 측정하였다. 1. 모든 상아질 접착제의 미세인장강도는 대조군, axial wall군, pulpal floor군 순으로 감소하는 경향을 보였다. 2. 대조군에서 SM과 BB는 SE에 비해 유의성 있게 높은 결합강도를 나타내었다(p<0.05). 3. SM과 SB는 대조군에 비해 axial wall군과 pulpal floor군에서 유의성있게 낮은 결합강도를 보였으나, SE에서는 pulpal floor군만이 유의성 있게 낮은 결합강도를 보였다(p<0.05). 4. Axial wall군과 pulpal floor군에서는 상아질 접착제의 종류에 따른 유의차를 보이지 않았다. 5. 전자현미경 소견에서는 대조군에 비해 axial wall군과 pulpal floor군이 더 부드러운 접착 계면을 나타내었다. 혼성층의 두께는 결합강도의 감소와는 관련이 없었다.