• Electronics and Telecommunications Trends
• /
• v.22 no.6
• /
• pp.182-193
• /
• 2007

본 연구에서는 프랑스, 영국, 핀란드 등 유럽을 대표하는 몇몇 국가와 미국, 일본, 호주 등 주요국을 대상으로 $800{\sim}900MHz$ 대역의 이용현황 및 활용사례를 살펴보았다. 특히, 저대역 주파수에서 상업적 가치가 높은 이동통신용 주파수의 이용현황 및 전개방향을 중심으로 살펴보았다. 그 결과 전세계적으로 이동전화서비스의 성장 및 신규서비스의 도입으로 주파수 수요가 급증함에 따라 주파수 부족현상이 심화되고 있고, 이에 따라 효율적인 주파수 사용을 위해 국가별로 회수 재배치가 중요한 이슈로 부각되고 있음을 알 수 있었다. 본 연구에서는 동조화가 높은 저대역 주파수에 대한 해외 주요국의 이용동향을 살펴봄으로써 향후 부족한 전파자원에 대한 유용한 시사점을 도출하고자 하였다. IMT-2000 주파수의 동조화는 800MHz와 900MHz 대역을 중심으로 이루어지는데 해외의 저대역 주파수에 대한 이용선례는 향후 통신사업자들의 사업방향에 중요한 지표가 될 것으로 기대된다. 이러한 연구는 전파정책을 추진하는 당국과 사업자에게 정책결정을 하는 데 유용한 정보를 제공할 것이라 기대된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.559-562
• /
• 2010

A Lamb wave guided by a plate structure has dispersive characteristics because phase and group velocity change with the variation of frequency and thickness. The Lamb wave has two modes, symmetric and anti-symmetric mode, which propagated symmetrically and non-symmetrically with respect to centerline. In this paper, the Lamb wave velocity variation with respect to direction is investigated.

• Journal of the Korea Convergence Society
• /
• v.6 no.5
• /
• pp.249-255
• /
• 2015

In this paper, we present an azimuth error analysis for the correlative interferometer direction finding. The correlative interferometer is a direction finding method that compares the theoretical and measured phase differences. The direction of the radio transmitter can be estimated by obtaining the maximum correlation between two data sets. We used a 5-element circular array antennas arranged in a circle. To derive the correlation function between antenna elements, we assume that the incident plane wave arrives from a certain angle and the phase difference of each antenna can be derived by comparing with the reference. The suggested direction finding gives a relatively accurate result even if the radio transmitter is located in the higher altitude.

• 한국해양학회지
• /
• v.14 no.2
• /
• pp.78-85
• /
• 1979

Korea has not any fixed station for Radio Navigation systems yet. In some part of the Korean Sea, however, Japanese stations can be utilized for the Radio Navigation. 3 Decca chains were proposed to install the Decca Navigation network for Korea. Only for the coverage area, 1 Decca chain is sufficient for the sea around Korea instead of 3 chains. At present, Omega system is the most recommendable for the positioning in the farther area. In nearshore area, Raydist or Decca Trisponder is is useful for obtaining the position with high accuracy.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.1015-1025
• /
• 2010

In this present study, we experimentally investigated the effects of electric fields on the characteristics of flames spreading over electric-wires with AC fields. The dependence of the rate at which a flame spreads over polyethylene-insulated wires on the frequency and amplitude of the applied AC electric field was examined. The spreading of the flame can be categorized into linear spreading and non-linearly accelerated spreading of flame. This categorization is based on the axial distribution of the field strength of the applied electric field. The rate at which the flame spreads is highly dependent on the inclined direction of the wire fire. It could be possible to explain the spreading of the flame on the basis of thermal balance.

• 방재와보험
• /
• s.111
• /
• pp.20-27
• /
• 2006

피난길이가 긴 장대터널에서 화재가 발생되면 생성된 연기가 상승하고 천장을 만나 터널의 길이방향으로 전파된다. 연기의 독성가스에 의해 질식하게 되는 인명피해를 줄이기 위해서는 발생한 화재의 크기에 따라 제연유속이 필요하며, 제연 팬의 용량과 신뢰성을 확보해야 한다.

• Journal of the Korean Ceramic Society
• /
• v.28 no.1
• /
• pp.19-19
• /
• 1991

Fracture of Al2O3 tubes for different loading path under combined tension/torsion was investigated. Macroscopic directions of crack propagation agreed well with the maximum principal stress criterion, independent of the loading path. However, fracture strength from the proportional loading test(τ/σ= constant) showed either strengthening or weakening compared to that from uniaxial tension, depending on the ratio τ/σ. The Weibull theory was capable to predict the strengthening of fracture strength in pure torsion, but not the weakening in the proportional loading condition. The strengthening or weakening of fracture strength in the proportional loading condition was explained by the effect of shear stresses in the plane of randomly oriented microdefects. Finally, a new empirical fracture criterion was proposed. This criterion is based on a mixed mode fracture criterion and experimental data for fracture of Al2O3 tubes under combined tension/torsion. The proposed fracture criterion agreed well with experimental data for both macroscopic directions of crack propagation and fracture strengths.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.187-192
• /
• 2017

Rigorous longitudinal modal transmission-line theory (L-MTLT) is applied to analyze maximum power transfer in asymmetric grating-assisted directional couplers(A-GADC). By defining a coupling efficiency amenable to rigorous analytical solutions and interference between symmetric and asymmetric supermodes, the power exchange of TE modes as a function of propagation distance is numerically evaluated. The numerical result reveals that maximum power transfer occurs at a grating period ${\Lambda}_{eq}$, in which the insertion loss of supermodes is equal to each other. That is, it is generally different from conventional phase-matching condition of GADC. Furthermore, as the asymmetric profile of grating change to symmetrical profile, the coupling length decreases and the coupling efficiency for power transmission increases.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.55-60
• /
• 2012

Longitudinal transmission-line modal theory is applied to analyze maximum power transfer in plasmonic grating-assisted directional couplers (P-GADC) based on silicon waveguide. By defining a coupling efficiency amenable to rigorous analytical solutions and interference between even and odd modes, the power exchange of TE modes as a function of propagation distance is evaluated. The numerical result reveals that maximum power transfer occurs at a grating period ${\Lambda}_{eq}=10.26{\mu}m$, in which the insertion loss of supermodes is equal to each other. That is, it is generally different from conventional phase-matching condition or minium gap condition of GADC.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.6
• /
• pp.512-519
• /
• 2013

It is important to understand the vibrating behavior of plate structures for its many engineering applications. In this study, the vibration characteristics of strip plates that have finite width and infinite length are investigated theoretically and numerically. The waveguide finite element(WFE) approach, which is an effective tool for studying waveguide structures, is used in this study. The WFE method requires only a cross-sectional finite element model, and uses theoretical harmonic solutions to assess wave propagation along the longitudinal direction. First, WFE results for a simple strip plate are compared with the theoretical results(i.e., dispersion diagrams and point mobilities) to validate the numerical model. Then, in the numerical analysis, different numbers of longitudinal stiffeners are included in the plate model to investigate the effects of stiffeners in terms of the dispersion curves and mobilities. Finally, the dispersion curves of a stiffened double plate are obtained to examine the characteristics of its wave propagation.