• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.46.2-46.2
• /
• 2009

탑재소프트웨어는 위성의 자세, 전력, 열 제어를 담당하는 소프트웨어로서 위성의 탑재컴퓨터 상에서 실행된다. 탑재소프트웨어는 추력기, 배터리, 온도조절장치와 같은 위성의 하드웨어 장치를 자치적으로 관리한다. 지상에서 위성을 운영할 수 있도록 탑재소프트웨어는 지상으로부터 명령을 받아서 처리하고, 위성의 텔레메트리 데이터를 지상으로 전송한다. 위성의 탑재소프트웨어를 프로그래밍하기 위하여 C 언어와 ADA 언어가 주로 사용된다. 이 논문에서는 소프트웨어 디자인과 하위레벨 프로그래밍 관점에서 C 언어와 ADA 언어를 비교 분석한다. 프로그래밍언어는 소프트웨어 디자인과 불가분의 관계에 있다. 이 논문은 프로그래밍언어와 함께 다목적실용위성과 통신해양기상위성의 소프트웨어 디자인을 소개한다. 다목적실용위성의 탑재소프트웨어는 절차 지향언어인 C로 작성되었으며, 함수 호출을 기반으로 설계되었다. 통신해양기상위성의 경우, 객체지향언어인 ADA로 작성되었으며, HOOD(Hierarchical Object-Oriented Design) 기법에 따라 모델링되었다. 탑재소프트웨어 프로그래밍언어는 위성의 탑재 하드웨어와 직접적으로 상호작용하도록 요구된다. 이 논문은 C와 ADA 언어가 메모리주소 및 로우 스토리지를 다루는 방법을 보여준다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.77-79
• /
• 2016

In this paper, we consider hierarchical modulation (HM), which has been widely exploited in digital broadcasting systems. In HM, each independent data stream is mapped to the modulation symbol with different transmission power and normalization factors of conventional M-QAM cannot be used. In this paper, we derive the method and formula for exact normalization factor of three-level hierarchical 64QAM.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.11
• /
• pp.1091-1097
• /
• 2013

This paper presents a rectifier with comparator using unbalanced body biasing in $0.11{\mu}m$ RF CMOS process. It is composed of MOSFETs and two comparators. The comparator is used to reduce reverse leakage current which occurs when the load voltage is higher than input voltage. For the comparator, unbalanced body biasing is devised. By using unbalanced body biasing, reference voltage for comparator changing from high state to low state is increased, and it reduces time interval for leakage current to flow. 13.56 MHz 2 Vpp signal is used for input and $1k{\Omega}$ resistor and 1 nF capacitor are used for output load for simulation and experimental environment. In simulation environment, voltage conversion efficiency(VCE) is 87.5 % and Power conversion efficiency(PCE) is 50 %. When the rectifier is measured, VCE shows 90.203 % and PCE shows 45 %.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.5
• /
• pp.12-20
• /
• 2008

RFID(Radio frequency indentification) technology, that the reader detect the tag information attached on the objects without contact, is considered the kernel of realizing tile Ubiquitous Sensor Network. Particularly, because there are lots of tags(which the reader have to detect) in the UHF RFID system(that is applied at the Logistic & Distribution industry). In the UHF RFID system the negative effects, we called the tag-collision, may occur and we should solve these effects. So, in the EPCglobal Gen2 protocol they present the Slotted Random Anti-collision algorithm to prevent the tag-collision effect. In this paper, in order to minimize the tag-collision effect and bring on the system efficiency, we propose the Power Increasing Method that controls the transmission power of the reader depending on the environment and verily the improved performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.18-25
• /
• 2014

To increase wireless capacity, the concurrent use of multiple wireless interfaces on different frequency bands, called aggregation, can be considered. In this paper, we focus on aggregation of multiple Wi-Fi interfaces with packet-level traffic spreading between the interfaces. Two aggregation schemes, link bonding and multipath TCP (MPTCP), are tested and compared in a dualband Wi-Fi radio system with their Linux implementation. Various test conditions such as traffic types, network delay, locations, interface failures and configuration parameters are considered. Experimental results show that aggregation increases throughput performance significantly over the use of a single interface. Link bonding achieves lower throughput than MPTCP due to duplicate TCP acknowledgements (ACKs) resulting from packet reordering and filtering such duplicate ACKs out is considered as a possible solution. However, link bonding is fast responsive to links' status changes such as a link failure. It is shown that different combinations of interface weights for packet spread in link bonding result in different throughput performance, envisioning a spatio-temporal adaptation of the weights. We also develop a mathematical model of power consumption and compare the power efficiency of the schemes applying different power consumption profiles.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.72-80
• /
• 2010

The 1Gbps clock and data recovery (CDR) circuit using the proposed multi-point phase detector (PD) is presented. The proposed phase detector generates up/down signals comparing 3-point that is data transition point and clock rising/falling edge. The conventional PD uses the pulse width modulation (PWM) that controls the voltage controlled oscillator (VCO) using the width of a pulse period's multiple. However, the proposed PD uses the pulse number modulation (PNM) that regulates the VCO with the number of half clock cycle pulse. Therefore the proposed PD can controls VCO preciously and reduces the jitter. The CDR circuit is tested using 1Gbps $2^{31}-1$ pseudo random bit sequence (PRBS) input data. The designed CDR circuit shows that is capable of recovering clock and data at rates of 1Gbps. The recovered clock jitter is 7.36ps at 1GHz and the total power consumption is about 12mW. The proposed circuit is implemented using a 0.18um CMOS process under 1.8V supply.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.701-713
• /
• 2009

This paper studies a method for reducing performance degradation due to losing sub-carrier orthogonality caused by power transient between physical channels in LTE uplink transmission. The pattern of inter-carrier interference(ICI) caused by power transient is different from what has been studied for doppler shift, in that its pattern occurs at front and rear sides of channels in each period of power transient. The reason of ICI's occurrence results from power difference between channels, power transient duration, multi-path channel delay spread, and numbers of sub-carrier. New criterion is proposed to find out number of taps of multi-tap equalizer enough to improve the ICI. The scheme is to determine the number of taps of multi-tap equalizer when a normalized interference or a normalized ICI is greater than a normalized noise. Simulation results show that the number of taps is flexibly adjusted according to SNR(Signal to Noise Ratio) of a received signal to improve Bit Error Rate(BER), while the complexity of the proposed scheme is reduced down to 88 percentage of the classical method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.229-229
• /
• 2007

나노결정 합금재료를 전력선 통신 커플러용 자심재료로 응용하기 위해서는 고주파 대역에서의 손실 특성이 제어되어야 한다. 즉 고속 전력선 통신을 위한 자심재료의 투자율 및 완화 주파수 등의 전자기적 특성은 30MHz까지 우수하고 안정적으로 유지되어야 하며, 높은 투자율 및 자속밀도, 공진주파수뿐만 아니라 낮은 전력손실 값을 가져야 한다. 따라서 본 연구에서는 나노결점 합금 리본 표면에 딥 코팅, 졸-겔법, 진공함침 등의 방법을 이용하여 PZT, $TiO_2$ 및 $SiO_2$ 등의 산화물 고저항층을 형성시켜 자기적 성질을 유지하면서 고주파 대역의 와전류 손실을 감소시켜 통신용 자심재료로의 응용성을 향상시키고자 하였다. PZT 슬러리의 제타전위 조절을 통해 최적의 분산조건을 얻을 수 있었고, 평균 150nm인 PZT 입자의 초미립자와 가소제, 분산제, 결합제의 첨가조건을 확립할 수 있었다. 딥-코팅은 슬러리 내 유지시간 10초, 인상속도 5mm/min로 30회 반복되었을 때 가정 우수한 특성을 나타내었으며, 고주파 대역에서의 손실 감소효과를 나타내었다. 그리고 졸-겔법에 의해 제조된 슬러리를 이용한 $TiO_2$와 $SiO_2$ 산화물 저항층 코팅을 통해 금속 알콕사이드의 혼합조건 및 저항층 형성용 슬러리의 제조조건을 확립하였고, 합금 리본표면에 균일하고 우수한 점착력을 가지는 저항층을 형성시킬 수 있었으며, 이에 따른 코어손실의 감소효과를 나타낼 수 있었다. 또한 진공 함침법을 통한 저항층 형성에서, $TiO_2$ 나노분말을 표면 저항층으로 코팅했을 때, 가장 높은 코어손실 감소효과를 나타내었다. 한편, 표면 저항층이 형성된 나노결정 합금으로 제조한 자심재료를 이용하여 전력선 통신용 비접촉식 커플러에의 적용과 시험을 통해 고주파 손실 감소효과에 의한 신호전송 특성과 전류특성을 향상시킬 수 있었다.

• The KIPS Transactions:PartD
• /
• v.17D no.3
• /
• pp.185-192
• /
• 2010

In sensor network environments, each sensor measures the physical environments according to the sampling period, and transmits a sensor reading to the base station. Thus, the sample period influences against importance resources such as a network bandwidth, and a battery power. In this paper, we propose new adaptive sampling technique that adjusts the sampling period of a sensor with respect to the features of sensor readings. The proposed technique predicts a future readings based on KF (Kalman Filter). By using the differences of actual readings and estimated reading, we identify the importance of sensor readings, and then, we adjust the sampling period according to the importance. In our experiments, we demonstrate the effectiveness of our technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1153-1160
• /
• 2003

In this paper, the performance of the UWB communication systems is analyzed in the presence of the Narrow Band Interference(NBI). UWB communication systems are modeled as using the Pulse Position Modulation(PPM). In this system, a Gaussian monocycle is used as the received pulses. The NBI is considered as a zero-mean random process with a constant spectral power density over its whole bandwidth. We obtain the mathematical expressions for describing the effect of the NBI on the UWB system. And it can be shown that the suppression of the effect of NBI on the UWB systems is available by adjusting the PPM related parameter.