• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.771-778
• /
• 2014

We propose Femto-cell power control scheme in HeNet with Game Theory. The Femto-cell which provide high quality with low power is issued by many benefits, however there is a bunch of interferences when many Femto-cells use overlapped bandwidth with Macro-cell. We defined base station of cellular networks and mobile users as players of Game Theory, and configured interference effect among each other as power utility function. Futhermore, we showed enhanced overall system performance, lower power usage and interference decrease by using optimal power.

• The Journal of Information Technology
• /
• v.6 no.3
• /
• pp.1-10
• /
• 2003

This paper is concerned with a power line channel modeling for the more fast and efficiently power line communication experiment. A capacitor load channel simulator is a essential equipment in the power line modem development for in-house network. We accomplished a channel modelling by the frequency response method about the total 298 capacitor load channels. This channel data is acquired by the capacitor load simulator modeling a real power line channel environment. When the experiment results acquired from the capacitor load simulator were compared with the result from a channel filter, we confirmed to substitute capacitor load experiments on the actual power line communication without big error.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.88-91
• /
• 2015

Wireless power transmission (WPT) is a technology using free space as a conductor for transmitting electric power, which aims to transfer not just the transmission signal but also the electrical energy itself. This paper takes issue with the microwave wireless transmission technology utilizing in long-distance transmission. To construct the WPT system, several components are needed, such as RF Oscillator which converts AC power to RF through DC status, high gain antenna and RF rectifier that converts RF back to DC. The array topology is good a candidate for wide use. The objective of this research is to study the efect of the WPT systmem on electric power system.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.108-116
• /
• 2003

This research presents the design and analysis of PCDU(Power Control & Distribution Unit) of communication satellite. The PCDU of a spacecraft must provide adequate power to each subsystem and payload during mission life, and it also needs high reliability and performance in space environment. A control circuit of the PCDU include bus sensing and filter circuits, error signal amplification circuit, error compensation circuit of SAS(Shunt Assembly Switch) and BPC(Battery Power Converter). The phase margin and DC gain for the designed circuits are analyzed through the frequency response characteristics of the compensated control circuit. And also the transfer function of the battery power converter circuit are discussed at the battery CCCM(Charge Continuous Conduction Mode) and battery C/DCCM(Continuous/Discontinuous Conduction Mode).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.217-223
• /
• 2012

Time synchronization problems is very important in everyday life and a variety of industries, In this paper, we developed PLB(Power Line Broadcasting) system which broadcast time information to each device through power line modems. In our system, the smartphone synchronized to GPS time is used as a time source and we propose, develop and evaluate a relay system to solve the difficulties of long-distance transmission of power line modem technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.437-444
• /
• 2010

The audio data have been communicated using analog methods or simple protocols. However, with the advent and improvement of various multimedia functions, many audio devices have been integrated into a mobile handset in which interconnection lines are very complicated. Conventional point-to-point connections such as $I^2S$ and PCM demand more power consumption whenever more devices are attached. In this paper, we design a common bus digital audio interface that communicates with only two wires and employs the clock gear method to reduce bus power consumption. The comparison results show that the proposed common bus connection can reduce more than 30% of power consumption as compared with point-to-point connection if more than three devices are connected.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.1
• /
• pp.19-23
• /
• 2010

This study is to develop power line communication and short-range wireless communication system using LED. I will create optical receiver and transmitter using LED and optical sensor and connectors for display device and communication in receiver and transmitter were created. Experiment method is to signal and waveform through oscilloscope date from optical sensor after chosen a highly efficient LED. In addition, reception and transmitter of smoothly data using visible light communication program were checked. I will compliment problems through this experiment and constantly study, improve on power loss.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.843-846
• /
• 2009

경부고속전철의 급전선에 의한 전력유도 대책을 위하여 건설 당시 정보통신부 고시에 의하여 시행되었다. 통신선에 장애를 유발할 수 있는 전자유도 대책을 위해서는 국가 기술기준에 의한 유도전압 한계치가 정해져 있고 현장 대책 상 이 제한치를 초과할 때에 필요한 것이므로 상기 정부 고시의 기술 근거에 의해 유도전압을 계산하여 조치하고 있다. 전기철도시스템에서 지역 구간상의 전력 공급을 위한 일정 거리마다 급전소가 시설되어 있어서 이로부터 전철에 전력이 공급되고 있다. 전철의 유도현상에 의한 유도전압 분포 분석을 위한 전국 구간 유도측정을 수행하여 급전구간에서의 유도전압 특성을 파악하였다. 구간 중심점상에서 낮아지는 전압에 대해 급전소 근접 구간에 이르렀을 때의 전압 상승 특성을 분석하였다. 급전소로부터 귀로되는 전류의 양이 집합됨으로 유도전압이 높아지고 거리가 멀어질수록 전압은 떨어진다. 유도대책을 전압 분석에 있어서와 차폐시설물의 연계 활용 시 이러한 전압의 영향성을 고려할 필요가 있다.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.79-80
• /
• 2013

MMC(Modular Multilevel Converter)는 여러 개의 Power Module을 직렬로 연결하여 정현파에 가까운 고전압의 파형을 얻을 수 있는 토폴로지로 대용량 전력변환 분야의 요구를 만족하면서 전력 품질을 향상시킬 수 있어 근래에 상당히 주목받고 있다. 당사에서는 5Mvar급 STATCOM(STATic synchronous COMpensator)을 MMC 형태로 제작하였다. 제작된 5Mvar급 STATCOM은 한 상당 12대의 Power Module로 구성하여 25-Level로 제작되었다. 제어시스템은 DSP(Digital Signal Processor)를 이용하였으며, 하나의 Main Controller와 다수의 Cell Controller, FPGA 보드 등으로 구성되어 있다. Controller 간의 상호 정보를 교환하기 위해 CAN 통신을 이용하였고, Power Module의 스위칭을 위한 보드는 각각에 연결되어 있으며, Cell Controller보드와는 절연을 위해 광신호로 연결하였다. 본 논문에서는 MMC 시스템의 제어기간 CAN 통신인터페이스와 Power Module의 PWM 동기화에 대해 설명을 하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2031-2032
• /
• 2006

고압 배전선로를 전력선통신망으로 활용하기 위하여는 고압 배전선로에 대한 입력 임피던스에 대한 정확한 이론적 고찰과 실선로에서의 측정을 통한 검증이 요구된다. 본 논문에서는 고압 배전선로용 신호결합장치의 등가회로를 바탕으로 고압 전력선통신시스템의 입출력 모뎀을 제안한다. 제안된 시스템입출력 모델을 바탕으로 고압 배전선로의 고주파(2-30MHz) 대역의 입력 임피던스를 계산한다. 고압 배전선로 통신 입출력 모델에서 지면의 유전상수, 전력선의 길이, 지면의 도전율에 따른 배전선로 입력 임피던스의 이론적 분석과 실 선로에서의 입력 임피던스 측정 결과를 소개한다.