• Geotechnical Engineering
• /
• v.11 no.3
• /
• pp.113-122
• /
• 1995

The purposes of this study are to investigate the mechanical prospeities of the inter mediate soils through consolidation tests and triaxial compression shear tests. The intermediate soils used in this study are artificial soils which are composed of sea clay, sand and it's crushed component. The relationship between plastic index and mechanical prosperties (permeability and compressibility) is investigated through series of consoli dation tests. Strain hardening phenomenon under shearing is explored based on several overconsideration ratios and strain rates in undrained shear tests. To make a comparative study difference of drain condition and strain rate, drain shear tests are performed with overconsolidation ratio.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.2
• /
• pp.121-131
• /
• 2007

Recently, the probability of rock joints being exposed to free faces is getting higher for the scale of rock mass structures gets larger. Also, the frequency of occurring dynamic events such as earthquakes and blasting has been increasing. Thus, the shear behavior of rock joints under different conditions needs to be investigated. In this study, a series of direct shear tests were carried out under various conditions to examine the velocity-dependent shear behavior of saw-cut rock joints. Two types of direct shear test were carried out. The first was to examine the velocity-dependent shear behavior of saw-cut rock joints at seven different shear velocities, each with three different normal stresses. The second was to examine the shear behavior of saw-cut rock joints when three different instantaneous shear velocities changed. As a result, the coefficient of friction was affected by normal stress. The breakpoint velocity, the point when the change of shear velocity starts to affect the frictional behavior, became lower as normal stress increased. Also, as the shear velocity became lower, the degree of stress-drop on stick-slip behavior became larger. As a result of examining the changes of friction coefficient, velocity weakening (decrease of friction coefficient) was observed. The decrement of friction coefficient due to the changes of shear velocity under slow shear velocity was larger than that under fast shear velocity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.195-202
• /
• 1994

In this research, a lot of triaxial test results (CID) are analyzed to study the curvature characteristics of failure envelope of sand and parametric relationship between shear strength and state parameter by Been and Jefferies. In the conventional triaxial tests, correction for the change of sectional area of a sample and for membrane influence is essential especially in order to determine critical state (or steady state) condition more correctly. Based on the test results, a model to express the shear strength of fine sand as a function of density and stress level is presented and curvature characteristics of shear failure envelope and parametric relationship between state parameter and shear strength parameters are evaluated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.245-246
• /
• 2010

The purpose of this research is to investigate the nonlinear shear characteristics of Glass Fiber Reinforced Polymer(GFRP). FRP shear tests are conducted to determine the nonlinear shear behavior in accordance with ASTM specifications. The results obtained by these tests provides the exact shear properties and finally will be used to predict the long-term performance of RC structures applied by shear force.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.1
• /
• pp.103-113
• /
• 1993

일반적으로 스터럽이 없는 철근콘크리트 보의 전단강도는 콘크리트 압축강도, 주철근비, 전단스팬비 및 보 유효깊이에 좌우된다는 것이 많은 연구를 통하여 밝혀지고 있다. 따라서, 본 연구에서는 고강도 콘크리트를 사용한 철근콘크리트 보의 거동 및 전단강도 특성을 분석하기 위하여 주철근비, 전단스팬비 및 보 유효깊이를 변수로 두고 총 22개의 단철근 보 실험체를 제작하여 실험을 수행하였다. 실험결과는 ACI규준식, Zsutty식 및 Bazant & Kim식의 예측값들과 함께 비교, 분석되었는데, ACI 규준식은 주철근비 및 전단스팬비의 효과를 과소평가할 뿐만 아니라 유효깊이가 915mm인 큰 보의 경우 안전측이 아니어서 이에 대한 고려가 필요할 것으로 판단된다. Zsutty식은 주철근비의 효과를 적절하게 평가하는 것으로 나타났으며, Bazant & Kim 식은 유효깊이 증가에 따른 전단강도 감소 경향을 잘 예측하는 것으로 나타났다. 또한, 다른 연구자들의 실험치와 비교, 분석해본 결과 주철근비 및 전단스팬비의 효과는 콘크리트 압축강도 수준에 따라 큰 변화가 없는 것으로 판단된다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.2
• /
• pp.225-236
• /
• 2014

Shear wave velocity was used to estimate the geotechnical characteristics (void ratio and shear strength) of ground near an underground rainfall storage facility. An oedometer cell was utilized to measure the shear wave velocity and the displacement of specimens. Shear strengths were obtained by direct shear tests. The relationships along the shear wave velocity, void ratio, and shear strength were verified and used to infer the shear strength profile with the depth. In addition, changes in shear strength due to the construction of the underground rainfall storage system were estimated using the suggested method. The results show that the in-situ shear strength deduced from the shear wave velocity-void ratio-shear strength relationship is in good agreement with that obtained from an in-situ investigation (SPT).

• Korean Journal of Agricultural Science
• /
• v.11 no.2
• /
• pp.278-283
• /
• 1984

Shearing characteristics of cornstalks were investigated under quasi-static conditions at various knife approach angles and shear angles in order to determine their importance to the cutting action of mowers. Corn variety used in this study was pioneer that was grown in the field of Chungnam National University. The results obtained were as follows: 1. The shearing process had two shearing stages in cornstalks, which was different from those of rice and other forage crops due to the hard crust. 2. Force and energy of shear were decreased progresively with height of the cornstalks. 3. The minimum shear force occured at shear angle of about $60^{\circ}$ and approach angle of about $10^{\circ}$ 4. The condition of minimum shear energy coincides with that of minimum shear force. 5. Effects of knife approach angles were more significant than those of shear angle for force and energy of shear.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.107-113
• /
• 2001

This work presents field-dependent Bingham and response characteristics of MR fluids under shear and flow modes. Two different types of magneto-viscometers are designed and manufactured for the shear and flow modes. respectively. For the MR fluid to be tested, MRF-132LD of Lord co. is employed. The field-dependent yield stress is experimentally distilled at various temperatures using the magneto-viscometers. Time responses of the MR fluids to step electric fields are also evaluated under two operating modes.

• The Korean Journal of Rheology
• /
• v.9 no.3
• /
• pp.124-131
• /
• 1997

스테인레스 강(SUS 316L) 분말과 왁스계 결합제를 혼합하여 제조한 분말사출재의 유변학적 특성을 낮은 전단율에서 측정하기 위해 동심원반식 점성측정기를 이용하여 실험을 실시하였다. 측정기 벽면에서 발생하는 벽면 슬립(Slip)을 확인하고 벽면 슬립을 보정하기 위하여 두가지의 원반 간격에서 측정된 실험 자료를 이용하여 벽면 슬립을 보정하는 방법을 채택하였다. 실험 중, 측정 전단율범위를 제한하는 Thixotropy 현상을 발견학고 이에대한 원인분석을 위한 실험을 진행한 결과 과도한 전단응력에 의해서 분말사출재로부터 분리되어 나온 슬립층이 내부로 빠르게 흡수되어 들어가지 못하고 잔류하면서 Thixotropy 현상을 발 생시키는 것으로 판단되었다. Thixotropy 현상이 발생하지 않는 범위를 조사한후, 제한된 범위내에서 분말사출재의 유변학적 특성을 측정하였다. 측정된 자료는 항복응력을 지니는 유체의 특성을 표현하는 Bingham 식의 변형식에 잘 근사 되었으며, 슬립속도를 실험결과로 부터 계산한 결과 전단응력에 따라 선형적인 관계를 가지고 있는 점과 항복응력의 존재를 정성적으로 보여주는 결과를 얻었다.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.717-724
• /
• 2023

Residual shear strength is an important parameter in landslide dynamics and may be considered the critical factor in landslide triggering. Tests were undertaken using Jumunjin sands to examine the effects of smooth and rough surfaces on ring-shear characteristics. Under dense and drained conditions, shear velocities were recorded as 0.01, 0.1, 1, 10, 50, 100 mm s^-1, with shear strength increasing with velocity and producing increasingly fine content. Particle fragmentation may thus increase landslide mobilization when the landslide body is mixed with ambient water in channelized flows.