• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.679-681
• /
• 2002

본 논문에서는 해석적 기법을 적용하여, 추진력과 부상력을 동시 제어하는 Planar Motor의 정밀 특성 해석을 나타내었다. 특히, 본 해석 모델은 가동자의 요크를 제거하기 위한 Halbach Array를 적용하였으며, 이에 대한, 정밀한 특성 해석을 위해 공간고조파 해석법도 제안한다. 또한, 해석해 검증을 위하여 유한 요소해석법에 의한 결과와 비교 분석을 하며, 이를 토대로 한 해석 모델의 동작 특성을 살펴본다.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.366-369
• /
• 1991

A nonlinear controller based on feedback linearization method is proposed for an electromagnetic suspension system. After exactly linearizing the system with nonlinear feedback, linear control technique is applied. Modeling of stagger typed magnet is introduced and controlled for not only levitation, but guidance. By the feedback linearization, the nonlinear, MIMO system is linearized and decoupled, so we can use linear control law. The simulation of this system control skim is demonstrated. Robustness properties of the proposed controller with respect to the load variations and external disturbance is also analyzed for a multi input multi output system. In this properties, the boundary of variation is proposed.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.570-572
• /
• 1992

In this paper, an analysis of lift and lateral forces as a function of speed in electromagnetic suspension system (EMS) using the finite element method is presented. It is shown that, as in the case of the lift force, the lateral restoring force decreases with increasing speed, and the lateral dynamic characterisitic for lateral disturbance at low speed is different from that at high speed.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.752_753
• /
• 2009

This paper deals with controller design and dynamic simulation of hybrid magnetic bearing. The flux density at air-gap is obtained from system modeling which considers permanent magnet and electro magnet. The vertical force is derived yb that flux density using maxwell's stress tensor.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.623_624
• /
• 2009

This paper deals with the characteristic analysis of electro-magnet (EM)-permanent magnet (PM) hybrid levitation and propulsion device for magnetically levitated (maglev) vehicles. Several machine characteristics such as levitation force with/without control current and thrust are described. In order to verify the analysis results and feasibility of high-speed operation of the maglev vehicle, real-scale static test set is implemented and tested.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.18-21
• /
• 2007

철도차량의 경량화를 위해서 오늘날 알루미늄 압출재의 사용이 증가하고 있는 추세이며, 이를 통한 차체 제작이 일반화되고 있다. 경량화에 대한 요구는 더욱더 가속화되고 있으며, 특히 자기부상열차의 경우 환경규제 및 에너지 효율성 증대의 측면에서 경량화가 더욱 절실히 요구되고 있다. 그러나, 알루미늄 압출의 특성상 폭 대비 두께에 대한 제약이 따르므로 추가 경량화를 위해서는 알루미늄 압출재의 구조적인 연구가 필요하다. 따라서, 본 연구에서는 중공형 알루미늄 압출재의 내부에 Rib 형상에 따른 굽힘 특성을 비교함으로써 알루미늄 압출재의 경량화를 이루고자 하였다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.6
• /
• pp.342-350
• /
• 2003

In this paper, a levitation controller for a magnetic levitation(MagLev) system is designed and implemented. The target to be controlled is PEM(permanent and electromagnet) type with 4-corners levitation which is open-loop unstable, highly non-linear and time-varying system. The digital control system consists of a VME-based CPU board, AD board, PU board, 4-Quadrant chopper, and gap sensor, accelerometer as feedback sensors. In order to estimate the velocity of the magnet, we used 2nd-order state observer with acceleration and gap signal as input and output, respectively. Using the estimated states, a state feedback control law for the plant is designed and the feedback gains are selected by using the pole-placement method. The designed controller is experimentally validated by step-type gap reference change and force disturbance test.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.27-29
• /
• 2004

In this paper, a levitation control circuit for a magnetic levitation system supplied with a battery is designed. The control circuit consists of DSP, 4-quadrant chopper, and gap sensor as feedback sensors. Moreover the DSP includes PWM generator, A/D converter, etc. The feedback signals from gap sensors go into A/D converter of DSP to compare with reference. As a result, The design procedures of the levitation control circuit and battery power distribution system are described and basic experiment results are shown.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1036-1037
• /
• 2015

지상1차 선형동기전동기는 속도와 위치센서가 회전축에 설 부착되어져 있는 회전형 동기전동기와 달리 가이드웨이를 따라 위치센서 관련부품이 설치되어져 있다. 차상 자기부상열차로부터 전송되는 위치신호는 지상 추진인버터의 실시간 추진제어에 필요한 정보에 미흡하다. 본 논문에서는 지상1차 선형동기전동기를 구동하는 추진인버터에 대한 위치신호 추정기에 대하여 제시하였다. 지상 추진인버터가 요구하는 수준의 높은 분해능의 위치신호를 얻기위하여 직류모터 모델의 블록선도로부터 폐루프 위치관측기를 설계하고 시뮬레이션 및 실험을 통해 가용 성능 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.163-166
• /
• 2001

It leaves much room for improvement that UTM-01 is of practical use. Therefor we will design of longitudinal pole magnet for UTM-02 system. The design of new magnet is based on light weight for bogie system. The new magnet for UTM-02 was reduced weight of magnet is 18kg per one, then it was ratio lift to weight is 10.13.