• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1617-1622
• /
• 2004

Two-phase flow of liquid and gas through pipe lines are frequently encountered in nuclear power plant or industrial facility. Pressure waves which can be generated by a valve operation or any other cause in pipe lines propagate through the two-phase flow, often leading to severe noise and vibration problems or fatigue failure of pipe line system. It is of practical importance to predict the propagation characteristics of the pressure waves for the safety design for the pipe line. In the present study, a theoretical analysis is performed to understand the propagation characteristics of a weak shock wave in a bubbly flow. A wave equation is developed using a small perturbation method to analyze the weak shock wave through a bubbly flow with comparably low void fractions. It is known that the elasticity of pipe and void fraction significantly affect the propagation speed of shock wave, but the frequency of relaxation oscillation which is generated behind the shock wave is not strongly influenced by the elasticity of pipe. The present analytical results are in close agreement with existing experimental data.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2006

The advantages of LED(Light Emitting Diode) are low electric power consumption long life time and excellent visibility. In order to design and develope the marine lantern using LED, technical trends and standards about the marine lantern were analyzed and sample products were manufactured and evaluated in comparing with existing marine lantern The performance of developed LED lantern is better than that of the existing marine lantern using an incandescent lamp. The electric power consumption of our products is 30[%] and the luminous intensity is two or fen times brighter than existing marine lantern.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.109-116
• /
• 2010

일반적으로 사용되는 비탈면 보강공법은 중력식 혹은 가압식 네일링, 앵커 등이 있다. 이들 공법은 주입재 주입압력이 중력식무압 혹은 낮은 압력의 가압에 의한 것으로서, 실제로 단층파쇄대, 붕적층, 이완 및 절리 등이 발달한 지반에서는 일정압력의 가압주입에 의한 지반보강과 보강재에 의한 네일링 효과를 동시에 기대해야 한다. 본 사례에서는 가압주입의 효과를 높이기 위해 보강구간을 일정한 간격으로 나누고 구간별 별도의 주입펌프를 연결하여 보강길이 전구간을 동시에 주입하는 멀티패커시스템(MPS)공법을 소개하고자 한다.

• Journal of agriculture & life science
• /
• v.44 no.4
• /
• pp.1-7
• /
• 2010

Data was collected to develop equation for predicting stemp taper for Carpinus laxiflora in Jeju Experimental Forests. The Models tested for choosing the best-fit equations were Max & Burkhart's model, Kozak's model, and Lee's model. Performance of the equations in predicting stem diameter at a specific point along a stem was evaluated with fit and validation statistics and distribution of residuals on predicted values. In result, all the three models gave slightly better values of fitting statistics. In plotting residuals against predicted diameter, Max & Burkhart's model showed underestimation in predicting small diameter and Lee's Model did the same in predicting small diameter. Based on the above analysis of the three models in predicting stem taper, Kozak's model was chosen for the best-fit stem taper equations, and its parameters were given for C. laxiflora. Kozak's model was used to develop a stem volume table of outside bark for C. laxiflora.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1720-1725
• /
• 2004

Absorption characteristics of green tea powder were investigated. The monolayer moisture content determined by GAB equation was 0.024~0.052 g $H_2O$/g dry solid. The absorption enthalpy was calculated with different particle size and various water activities. It showed that the absorption energy was decreased with increasing water activity but no difference was found on particle size increasement. Among models applied for predicting equilibrium moisture content, Halsey model was the best fit model for green tea powders, showing the lowest prediction deviation of 2.1~4.0%. The prediction model equations for the water activity was established as function of relative humidity, time and temperature. The model equation will be helpful for future work on drying and storage of green tea powder.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.113-118
• /
• 1995

Investigation and optimization of culturing conditions were performed for the production of microbial surfactant, O-acid (precursor of S-acid) using Pencilium spiculisporum. Glucose and ammonium nitrate were found to be the most effective carbon and nitrogen sources, respectively. Supplementation of medium with trace elements, such as $CaCl_2 and FeSO_4$, increased the O-acid production by 20% and maintenance of the dissolved oxygen tension near saturation increased 40% of the O-acid productivity. Also 60% increase in the O-acid production was observed by maintaining the glucose concentration near 50%g/l by feeding glucose during the cultivation.

• Korean journal of applied entomology
• /
• v.29 no.3
• /
• pp.201-208
• /
• 1990

The gustatory sense organs in the mouthparts of th adult Green Leafhopper (Cicadella viridis L.) were observed by scanning electron microscope. The gustatory sensilla were composed of ten D-sensilla on the precibarim, eight P-sensilla on the wall of both side of eipharyngeal basin, and two H-sensilla in the food canal of the hypopharynx. D- and P-sensilla were again subdivided into 2 subtypes as two types by their morphology. Beneath the cuticle of epipharynx, two paris of nerve bundles were seen originating from D- and P-sensilla, respectively. And a pair of nerve bundles from H-sensilla, beneath the cuticle of hypoharynx, was observed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.731-736
• /
• 2012

A new method for producing boron-containing nanoparticles is described. Boron trichloride ($BCl_3$) and methane ($CH_4$) are dissociated through injection into a thermal plasma followed by a nucleation process producing boron or boron carbide nanoparticles. X-ray photoelectron spectroscopy was used to detect B-C bonds related to the carbide state and to probe the ratio of boron to carbon in the B-C bond structure. In addition, nanoparticles were characterized with scanning transmission electron microscopy and electron energy loss spectroscopy. It was found that nanoparticles were in the range 30-70 nm and a boron to carbon ratio in the B-C bond structure of up to 2 can be reached when $BCl_3$ of 20 sccm and $CH_4$ of 25 sccm were used.

• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.6-11
• /
• 2018

There are various manufacturing processes for pure $SiO_2$ that is used as abrasives, chemicals, filters, and glasses, and in metallurgy and optical industries. In the optical fiber industry, to produce $SiO_2$ preform, $SiCl_4$ is utilized as a raw material. However, the combustion reaction of $SiCl_4$ has caused critical environmental issues, such as ozone deficiency by chlorine compounds, the greenhouse effect by carbon dioxide and corrosive gas such as hydrochloric acid. Thus, finding an alternative source that does not have those environmental issues is important for the future. Octamethylcyclotetrasiloxane (OMCTS or D4) as a chlorine free source is recently promising candidate for the $SiO_2$ preform formation. In this study, we first conducted a vaporizer design to vaporize the OMCTS. The vaporizer for the OMCTS vaporization was produced on the basis of the results of the vaporizer design. The size of the primary particle of the $SiO_2$ formed by OMCTS was less than 100 nm. X-ray diffraction patterns of the $SiO_2$ indicated an amorphous phase. Fourier-transform infrared spectroscopy analysis revealed the Si-O-Si bond without the -OH group.

• Journal of Integrative Natural Science
• /
• v.2 no.3
• /
• pp.177-184
• /
• 2009

신소재(고분자, 금속, 세라믹)는 기존의 재료와는 다른 우수한 특성과 새로운 기능이 있어 우리 인류 복지에 매우 중요하며 우리는 무한대 생존 경쟁에 몰리고 있다. 이 중 무기고분자는 유기고분자의 단점을 보완하는 동시에 새로운 기능성을 가지므로 산업발전에 매우 중요하다. 다양한 무기고분자의 응용분야 중 세라믹 전구체로의 사용은 첨단 산업 분야에 막대한 발전을 초래하였다. 특히 규소를 함유하는 비산화성 세라믹인 탄화규소 (SiC) 및 질화규소 ($Si_3N_4$) 세라믹은 그 산업적 용도가 다양하다. 규소 고분자는 원료 물질이 값싸고 중합 수율이 높아서 경제적이고, 분자 내 Si와 C 또는 N의 비율을 자유자제로 조정할 수가 있고, 용융성 또는 용해성이 있으므로 성형가공이 가능하며, 세라믹 잔여 수율을 증대시키기 위해서 여러 화학반응에 의해 가교도 시킬 수가 있다. 열분해 조건에 따라서 SiC와 $Si_3N_4$ 등 선택의 조절이 쉬우며, 금속과 섞어서 열분해 함으로서 세멧도 제조할 수가 있다. 이런 종류의 연구는 신소재의 총아인 금속, 고분자, 세라믹 연구들이 함께 어우러진 종합 작품이라 할 수 있겠다. 여러 유형의 유기규소 고분자들을 다양하게 합성해서 그 열분해 과정을 좀 더 면밀히 연구한다면 산업적 응용 가능성은 매우 크리라 기대된다.