• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.208-217
• /
• 2022

Mushrooms in Naejangsan National Park between May and September of 2021 have been surveyed. In this period, a total of 4 divisions, 9 classes, 25 orders, 72 families, 171 genera, and 381 species, including 3 climate-sensitive biological indicator species were found. The order in which the most diverse array of species was observed is Agaricales, which includes 24 families, 64 genera, and 170 species. Among these, the genus Russula was dominant, with 30 species, followed by the genus Amanita with 27 species. Among the 12 grids we investigated, species diversity was greatest in grid F5, in which 56 species of mushrooms were found. In particular, a large number of ectomycorrhizal mushrooms, including Russula spp. and Lactarius spp. were recognized. We presume that the gentle slopes and the low occurrence of Sasa borealis in this area may create a favorable environment for wild mushrooms. In corroboration, some grids (e.g. F6, F8, and F10) covering steep slopes and harboring large numbers of Sasa borealis contained only 19 species. Based on DNA sequence analysis, the NJ21064 was identified as Chlorophyllum hortense, which is newly recorded in Korea.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.386-391
• /
• 2022

This study is about a technique for obtaining collagen by extracting fat by treating collagen-containing liposuction effluent in the presence of supercritical fluid. Using a supercritical solvent, a collagen extract could be obtained from animal-derived fat in a short time (about 6 hours), and about 2-3% of collagen by mass compared to the raw material could be obtained. The presence of collagen in the extract obtained by supercritical extraction was confirmed by SDS-PAGE, and it was confirmed that it was type 1 collagen having a relatively large molecular weight. In addition, the growth factors of IGF-1, bFGF, VEGF and NGF were analyzed to find out which growth factors were present in the collagen obtained by supercritical extraction, and it was found that these growth factors were contained in the extract. There was no significant difference in DNA content per mg of sample before and after supercritical treatment. Further in-depth studies are likely to be needed on decellularization technology using the supercritical process. In conclusion, the extracellular matrix obtained through the solvent extraction process using a supercritical fluid contains growth factors above a certain amount even after decellularization and removal of fat, so that it was found that not only biocompatibility is greatly increased, but also tissue regeneration can be rapidly induced.

• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.2
• /
• pp.231-254
• /
• 2022

Industrial heritage resources produced by industrial activities have historical and conservative values and value as cultural properties as they serve as a medium connecting the past, present, and future. In other words, Industrial heritage resources should be used, managed, and preserved simultaneously as important records and evidence for the future. Metadata is well known as a necessary and important factor for the use, management, and preservation of information resources. In particular, in order to describe various industrial heritage resources that have historical, cultural, and conservative values, metadata elements from various perspectives are needed to relate to the story, type etc. of data. Therefore, this study attempted to design metadata elements that can comprehensively describe different types of industrial heritage resources. And we designed metadata that suited for the purpose of using, managing, and preserving industrial heritage resources, through mapping and combination between industrial heritage-related metadata. As a result, metadata was grouped into five types(administrative, descriptive, preservation, technical, use) and prepared into a total of 25 higher & 86 lower elements.

• Journal of Intelligence and Information Systems
• /
• v.28 no.4
• /
• pp.95-117
• /
• 2022

With the emergence of various media types due to the development of Internet technology, advertisers have difficulty choosing media suitable for corporate advertising strategies. There are challenging to effectively reflect consumer contextual information when advertising media is selected based on traditional marketing strategies. Thus, a recommender system is needed to analyze consumers' past data and provide advertisers with personalized media based on the information consumers needs. Since the traditional recommender system provides recommendation services based on quantitative preference information, there is difficult to reflect various contextual information. This study proposes a methodology that uses deep learning to recommend personalized media to advertisers using consumer contextual information such as consumers' media viewing time, residence area, age, and gender. This study builds a recommender system using media & consumer research data provided by the Korea Broadcasting Advertising Promotion Corporation. Additionally, we evaluate the recommendation performance compared with several benchmark models. As a result of the experiment, we confirmed that the recommendation model reflecting the consumer's contextual information showed higher accuracy than the benchmark model. We expect to contribute to helping advertisers make effective decisions when selecting customized media based on various contextual information of consumers.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.597-610
• /
• 2022

Knowledge of the failure behavior of friction materials considering their intermediate principal stress is related to an understanding of situations where these materials might be used: for example, the stability of deep-seated boreholes and fault slip analysis. This study designed equipment for physically implementing true triaxial compression and used it to assess specimens of plaster, a friction material. The material's mechanical behaviors are discussed based on the results. The applicability of the 3D failure criteria are also reviewed. The tested specimens were molded cuboids of width, length, and height 52, 52, and 104 mm, respectively. A total of 24 true triaxial compression tests were performed under various combinations of 𝜎₃ and 𝜎₂ conditions. Conventional uniaxial and triaxial compression tests were employed to estimate the mechanical properties of the plaster for use as parameters for 3D failure criteria. Examining the stress-strain relations of the plaster materials showed that a large difference between the intermediate principal stress and the minimum principal stress indicated strong brittle behavior. The mechanical behavior of the plaster used here reflects the change of intermediate principal stress. Nonlinear multiple regression analysis on the test data in the principal space showed that the modified Wiebols-Cook failure criterion and the modified Lade failure criterion were the most suitable 3D failure criteria for the tested plaster.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.615-625
• /
• 2021

Prior to proposing appropriate standard for subway station platform, this study conducted field measurements to examine characteristics of room acoustics on platform of two subway stations. As a result of analyzing the longitudinal length of the platform, Sound Pressure Level (SPL) decreased (maximum difference : 14 dB), Reverberation Time (RT) tended to increase (maximum difference of 0.8 s ~ 1.5 s), and C50 and D50 were decreased (maximum difference: 5.9 dB ~ 9.1 dB and 31.8 % ~ 37.6 %, respectively) as measurement positions moved away from the sound source. The Interaural Cross-correlation Coefficient (IACC) did not show clear tendency, but it was lower than 0.3 in entire points. It is judged that the subway platform has non-uniform sound field characteristics due to various combinations of direct and reflective sound even though it is finished with a strong reflective material.This indicates that the room acoustic characteristics of the near and far sound field are clearly expressed depending on the source-receiver distances in the subway platform having a long flat shape with a low height compared to the length.Therefore, detailed architectural and electric acoustic design based on the characteristics of each location of speaker and sound receiver in the platform is required for an acoustic design with clear sound information at all positions of the platform.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.693-702
• /
• 2022

The purpose of this study is to present the problems of urban ecosystem imbalance in Seoul and the need to restore housing functions through comparison with Manhattan, New York, which grew earlier than Seoul and has been striving to solve urban problems and restore urban ecosystems. The residential status in urban commercial use areas was investigated through analysis of the total amount of residential space, characteristics of each type of residential building, and distribution of residential buildings. Through this, it can be seen that most of the space in Seoul's historic city center is biased toward commercial roads, and there are significantly insufficient high- and high-density mixed-use buildings suitable for urban dwellings compared to Manhattan's. In addition, it can be seen that the complex building in the historical city center of Seoul is located adjacent to the outskirts of the target site. In conclusion, Seoul's historical city center does not provide an appropriate residential space for creating an urban ecosystem, and it is necessary to come up with measures to restore housing functions.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.89-100
• /
• 2022

The development of the Construction Production Rates System for appropriate construction cost calculation has recently come to the fore as a means of invigorating OSC based PC structure which currently needs institutional frameworks. PC structure based construction expenses consist of the factory-built assembly, transportation and on-site installation. Recently, in the field of transportation and site installation, research on product structure development is being conducted, such as presenting the standard product calculation system reflecting the results of field survey for each subsidiary materials (Lee et al., 2021). On the other hand, there is no ongoing research on estimating construction expenses of Factory-built assembly. This study suggests Construction Production Rates System which can be used for PC subsidiary materials based Factory-built assembly cost estimations. For the research, work types for the construction procedures have been categorized, and the standard input manpower suitable for the corresponding work characteristics has been derived from analyzing the associated Construction Standard Production Rates for each work type. Also, as the research referred PC subsidiary materials (such as columns, beams, walls, and slab, as well as on-site installation) and the standard number of workforce based on work types, one can calculate direct labor cost, using what the research shows. In addition, it suggests that the size of individual subsidiary materials be the extra cost factor, by using the characteristics that productivity changes depending on the size(m³) of subsidiary materials. It is expected that the research can contribute to objectively verifying factory-built assembly cost through of PC structure, which currently relies on estimates.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.967-976
• /
• 2021

Over the last ten years, the number of entanglement marine accidents has increased more than other accident types. This study analyzed the annual statistical report of marine accidents from the Korea Maritime Safety Tribunal and Korea Coast Guard. Despite some discrepancies between data of the two organizations, it was found that marine accidents involving fishing vessels were more prevalent than those involving non-fishing vessels. In addition, the main floating materials that caused wounded entanglement accidents were fishing nets, fishing gear, and ropes, and the proportion of them was high. Foreign and domestic policies on marine plastics recognize most marine plastics as marine environmental hazards and focus on marine litter recovery and the prevention of marine pollution. The representative Acts related to the marine environment and marine litter, the Marine Environment Management Act and the Marine Waste and Sediments Management Act, recognize marine litter as a type of marine waste, and deal with the types and definition of this waste. However, clearly defining marine waste is difficult. Therefore, this study tried to examine the relevant legal system of marine litter on ship operation and suggested improvement measures. Moreover, the definition of marine litter for the safe navigation and operation of ships was clearly proposed.

• Journal of Wetlands Research
• /
• v.24 no.2
• /
• pp.115-122
• /
• 2022

As the impermeable area of soil increases due to urbanization, the water circulation system of the city is deteriorating. The existing guidelines for low impact development (LID) facilities installed to solve these water problems or in previous studies, engineering aspects are more prominent than landscaping aspects. This study attempted to present an engineering and landscaping model for reducing pollutants by identifying the effects of vegetation on rainfall outflows and pollutant reduction in bioretention and the economic aspects of planting. Based on the results of artificial rainfall monitoring at Jeonju Seogok Park and the literature on vegetation rainfall runoff and pollutant reduction performance, the best vegetation for reducing pollution compared to cost was Lythrum salicaria L and Salix gracilistyla Miq. was the best vegetation for carbon storage. If you insist to design plants with only these two plantation, there is no choice but to take risks such as biodiversity. Herbaceous plants such as Lythrum salicaria L can be replaced by death of the plants or pests if considered planting various plants. The initial planting cost could expensive, but it is also necessary to mix and plant Salix gracilistyla Miq, which are woody plants that are advantageous in terms of maintenance, according to the surrounding environment and conditions. Based on the conclusions drawn in this study, it can be a reference material when considering the reduction of pollution by species and carbon storage of vegetation in LID facilities.