• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1477-1483
• /
• 2013

This paper proposes a low-voltage current-mode integrator for a continuous-time current-mode baseband channel selection filter. The low-voltage current-mode linear cascode integrator is introduced to offer advantages of high current gain and improved unity-gain frequency. The proposed current-mode integrator has fully differential input and output structure consisting of CMOS complementary circuit. Additional cascode transistors which are operated in linear region are inserted for bias to achieve the low-voltage feature. Frequency range is also controllable by selecting proper bias voltage. From simulation results, it can be noticed that the implemented integrator achieves design specification such as low-voltage operation, current gain, and unity gain frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.891-896
• /
• 2002

In this paper, a new voltage-controlled tunable integrator for low-voltage applications is proposed. The proposed active element is composed of the CMOS complementary cascode circuit which can extend transconductance of an element. Therefore, the unity gain frequency which is determined transcon-ductance is increased than that of the conventional element. And then these results are verified by the $0.25{\mu}m$ CMOS n-well parameter HSPICE simulation. As a result, the gain and the unity gain frequency are 42dB and 200MHz respectively in the element on 2V supply voltage. And power dissipation of the designed circuit is 0.32mW.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.995-1001
• /
• 2005

Implicit Integration has become a standard approach to efficient cloth animation, and it guarantees the stability of the system so that large steps can be used. Therefore, it is regarded as the best method for the real-time or interactive animation of cloth. Since the implicit method was introduced for stable cloth animation, various cloth animation techniques based on the method have been proposed. It is now possible to generate the real-time animation of cloth model with thousands of mass-point in general PC environments. Although the implicit method guarantees the stability, the implementation of the implicit method is generally more difficult than that of the explicit method. Even worse, it is very difficult to parallelize the computation process of the implicit method. The cloth animation with implicit method can be formalized as a linear system solving. In this paper we propose an stable and efficient cloth animation techniques based on the implicit method. The proposed method can be easily parallelized. Self-collision is another important issue in cloth animation, we also propose an efficient self-collision avoidance techniques.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.486-489
• /
• 2004

대용량의 직류 전원을 연속적으로 얻기 위한 가장 손쉬운 방법은 상용 교류전력을 정류하여 사용하는 것이다. 이렇게 얻어진 직류 전압 원은 리플을 포함하는 문제와 허용된 법위에 있지만 전압 변동율이 존재하게 된다. DC-DC 컨버터나 인버터 제어에서 이러한 문제를 해결하기 위하여 많은 연구가 행해지고 있다. 그러나 보상제어시간이 길거나 제어나 제어 이론이 복잡하여 시스템이 복잡하게 되는 등 각각의 문제점을 가지고 있다. 본 연구에서는 아나로그 적분기의 적분시간이 적분기 입력전압의 크기에 반비례하는 원리를 이용하여 이 펄스 변조 스위칭 컨버터를 순시 추종 제어하는 방법을 제시한다. 제안된 제어방법의 주요 특징은 정주촉수로 동작한다. 보상제어시간은 스위칭 주기를 기본단위로 추종제어 한다. 제어결과는 한 주기의 평균치로 추종 제어한다. 정상상태는 물론 과도 상태에서도 정확하게 지령치에 추종하여 제어됨을 알 수 있다.

• Electrical & Electronic Materials
• /
• v.5 no.4
• /
• pp.430-438
• /
• 1992

본 논문은 단로기의 조작 또는 전력기기의 고장시에 흐르는 급준성 대전류에 의하여 발생하는 자계의 측정이 가능한 새로운 센서의 개발에 대하여 기술한다. 동축케이블을 이용한 자기적분형 자계센서의 동작원리 및 설계방법 등에 대하여 이론적으로 해석하고 인가된 자계에 대한 센서응답을 정확하게 결정할 수 있는 교정실험을 수행하였다. 또한 센서의 동작원리에 상응하는 이론적 모델을 제안하였다. 시제작된 자계센서는 적분저항의 증가와 더불어 감지전압이 상승하고 감쇠시간은 줄어드는 특성을 나타내었다. 과도대전류에 의하여 유발되는 방사자계는 거리의 제곱에 반비례하는 특성을 보였으며 전자기기의 보호를 위한 전자차폐장치의 설계시 방사자계성분에 대한 영향을 고려하여야 됨을 확인하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.29-37
• /
• 2005

This paper presents a tuning-free conditional integration anti-windup strategy for induction machine with Proportional-Integral(PI) type speed controller. The on/off condition of integral action is determined by the frequency domain analysis of machine torque command without a prior knowledge of set-point changes. There are no tuning parameters to be selected by users for anti-windup scheme. In addition, the dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time even in the change of operating conditions. This algorithm is useful in many high performance induction machine applications not to allow the oscillation and overshoot of speed/torque responses. The main idea can be extended to general applications such as chemical processes and industrial robots.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.125-133
• /
• 2008

The purpose of this study was to compare EMG activities on the lower limb muscles during power walking and mormal walking. Seventeen subjects who have no known musculoskeletal disorders performed walking exercise at a cadence of 140 beats/min. After surface electrodes were attached to rectus femoris, vastus medialis, vastus lateralis, biceps femoris, tibialis anterior, medial gastrocnemius, averageed IEMG and peak IEMG, were measured. The result showed that the power walking did influence the averaged IEMG and peak IEMG. The EMG activity of the quadriceps during power walking was significantly higher than the corresponding values in normal walking during most phases. The averaged IEMG and peak IEMG of gastrocnemius muscles at the end of the double limb stance increased significantly when going from normal walking to power walking. The results indicate that power walking had greater effect on EMG activities on the lower limb muscles and demonstrate that the wide range of benefits can be obtained from power walking in respect to health and fitness. This study suggests that power walking has the potential to improve aerobic fitness and assist in weight management.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.2
• /
• pp.20-28
• /
• 1994

Theoretical radiation patterns for the corrugated horn antenna are analyzed by vector integral method and quasi-optics. The formular of the radiated fields for the corrugated horn antenna can be obtained by the potentials derived the equivalent current sources from hybrid fields at horn aperture and also calculated by the expanded mode set of Gaussian - Laguerre based on the quasi - optics. From comparison of the radiation patterns between two methods for a corrugated horn antenna designed on 85-115 GHz frequency range, the results are coincided well at center frequency but have some errors at each side frequencies 85 and 115 GHz.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.30-38
• /
• 1998

In this paper, a new CMOS current-mode integrator is proposed that can apply the basic building block of the low-voltage high frequency current-mode active filter. And tuning circuits that control the gain and unity gain frequency of them is designed. The proposed integrator is composed of the CMOS complementary circuit which can extend transconductance of an integrator. Therefore, the unity gain frequency which is determined transconductance and MOSFET gate capacitance can be expanded by the proposed integrator. The unity gain frequency of the proposed integrator is increased about two times larger than that of the conventional continuous-time integrator with NMOS-gm. And also, cut-off frequency and gain of the active filter can be controlled with the designed tuning circuit. From the result, we can reduce errors on fabrication. And then, 3rd-order low-pass active filter is designed as an application circuits. These results are verified by the small signal analysis and the 0.8$\mu\textrm{m}$ parameter HSPICE simulation.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.173-182
• /
• 2004

본 연구의 목적은 사이클 운동 시, 3가지 다른 길이의 페달 샤프트 (표준형, 5.08 cm, 10.16 cm)가 근육활동에 미치는 영향을 근전도 측정을 통해 비교 분석하는데 있다. 사이클링을 활동적으로 하는 여학생 5명을 피험자로 선택하여 대퇴지근(RF), 외측광근(VL), 내측광근(VM) 대퇴이두근(BF)을 표면전극을 사용하여 관찰하였다. 자료 분석을 위해 두 대의 S-VHS 카메라 (Panasonic Digital 5000)를 사용하여 사이클링 동작을 촬영하였다. 연구의 목적을 위해 각 조건에 대한 표준화된 평균 및 최대 근전도치가 계산되어졌다. 각각의 변인에 대해 페달 샤프트의 길이에 따른 근전도치의 차이점을 분석하기 위해 반복측정에 의한 일원변량분석을 사용하였으며, 통계적 유의성이 있을 경우 Newman-Keuls 사후검증을 실시하였다. 일반적으로 5.08 cm 길이의 페달 샤프트를 사용했을 경우 표준형의 페달 샤프트와는 다르게 모든 하지근의 적분 근전도치가 줄어드는 것으로 나타났다. 페달 샤프트의 길이가 길어짐에 따라 외측광근의 적분 근전도치가 통계적으로 유의하게 낮게 나타났고, 5.08 cm 길이에서 대퇴이두근의 적분 근전도치가 통계적으로 유의하게 낮게 나타났다. 페달 샤프트 길이에 따른 최대 근전도치의 통계적 유의성을 찾을 수 없었지만, 일반적으로 5.08 cm 길이의 페달 샤프트를 사용할 때 최대 근전도치가 가장 낮게 나타났다. 본 연구의 결과, 페달 샤프트의 길이가 하지근의 활동정도와 형태를 변화시킨다는 것을 알 수 있었으며, 하지관절의 부하에 영향을 미치는 것으로 사료되어진다. 이에 따라, 개인의 해부 구조학적인 면을 고려한 페달 샤프트의 길이 조절은 효율적이며 안정적인 사이클링 동작을 수행하는데 많은 도움이 될 수 있을 것이다.