• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.475-481
• /
• 2013

Although the lightly burnt MgO at $850{\sim}1000^{\circ}C$ has expansibility, it does not lead to unsound concrete. The expansion of MgO could compensate for shrinkage of concrete for a long-term, because the hydration of MgO occurs at a slow pace. Recently, the study and application of mineral admixture such as fly ash and blast furnace slag have increased for the hydration heat reduction, durability improvement, and reducing $CO_2$ emission in the construction industry. Thus, it is necessary to research on the concrete that contains both a mineral admixture and MgO as an expansion agent. This study investigates fundamental properties of fly ash concrete with lightly burnt MgO through various experiments. The adiabatic temperature test results showed that the fly ash concrete with MgO of the 5% replacement ratio had the slower pace of the temperature rise and the lower final temperature than the fly ash concrete. The influences of MgO on long-term compressive strength varied depending on water-binder ratio, and the long-term length change test results indicated the expansion effects of the FA concrete containing MgO.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.261-267
• /
• 1982

The objective of this study was to test germinability of sesame (Sesamum indicum L.) varieties at low temperatures. Seeds of III sesame varieties representing different maturity groups and countries were tested at four different temperatures between $10^{\circ}C$ and $16^{\circ}C$. Average germination percentages of III varieties were 92%, 57% and 3.3% at $16^{\circ}C, 14{\circ}C$ and $12^{\circ}C$.respectively. The highest daily germination percentage was observed after 4 days of incubation at $16^{\circ}C$, while it was after 8 days at $14^{\circ}C$. A regression analysis indicated that $15^{\circ}C$ as the minimum temperature for satisfactory germination in field conditions. In general, Korean local collections had better germinability than introduced varieties from 6 countries at different latitudes. 'San dong', a Korean local cultivar. showed the highest germination percentage (24%) at $12^{\circ}C$ when the average germination percentage of all varieties was as low as $3.3^{\circ}C$. Early maturity varieties germinated better at $12^{\circ}C$ and $14^{\circ}C$ than medium or late maturity groups, but no difference was observed at $16^{\circ}C$. Although larger seeds showed better germinability within a variety, there seems to be no relationship between seed size and germinability in sesame.in sesame.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.173-183
• /
• 2016

Various material characteristics of HSA800 steel were examined and a quantitative criteria about the homogeneity of the strength was proposed. Whether HSA800 steel is satisfied the criteria for homogeneity of the strength or not was also examined. From the test results, the material characteristics of 1/4 point from the extreme fiber in the Z-direction satisfied the KS requirements. The excellent directional properties and impact resistance at low temperatures were also showed from the test results. HSA800 steel satisfied the criteria of homogeneity for the strength of the steel. However, it showed that some structures were banded together at 2/4 point from extreme fiber in the Z-direction from the microscopic tests and attention is needed to be paid in that point.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.3
• /
• pp.21-25
• /
• 1979

To evaluate the possibility of hardening of rice seedlings to chilling injury by low temperature conditioning for improvement of nursery temperature management a chilling sensitive new variety Tongil from Indica \times Japonica cross and a chilling tolerant Japonica variety Jinheung were reared by the 3rd leaf-stage in a day $30^{\circ}C/night\; 20^{\circ}C$ growth chamber, and were subjected to temperature conditioning for hardening against chilling injury for 6 days. Then the seedlings conditioned and unconditioned were chilled in a day and night $8^{\circ}C$ chamber for 2, 4, 6, or 8 days long and returned to the day and night $30^{\circ}C/night\; 20^{\circ}C$ condition for development of chilling injuries. Survival rate after chilling injury development of the variety Tongil showed distinct effect of hardening, i. e. the unhardened-25 % survival, the hardened by a gradual drop of temperature regime $(30^{\circ}C/20^{\circ}C\rightarrow24^{\circ}C/14^{\circ}C\rightarrow18^{\circ}C/12^{\circ}C\rightarrow8^{\circ}C)4 -59% survival and the hardened. by repeated brief exposure (4hrs. to 6hrs.) to $8^{\circ}C$ shock-89% survival against chilling of $8^{\circ}C$ for 4 days long. The variety Jinheung survived even against 8 days chilling at $8^{\circ}C$ C, but the discoloration rate of leaves due to chilling showed noticeably the hardening effect as repeated shock was much better than the gradually lowering temperatures.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.60-60
• /
• 2011

막구조는 근래에 와서 대공간 구조 및 지붕구조에 가장 보편적으로 사용되는 경량 인장 구조물로 각광받고 있다. 구조용 막재는 풍하중 및 설하중에 충분히 감당할 수 있도록 강도와 내구성을 가지고 있어야 한다. 일반적으로 막구조 재는 PVC코팅 폴리에스터막, 실리콘코팅 유리섬유막, PTFE코팅 유리섬유막이 있다. 제직되는 원단의 크기가 한정되어 있기 때문에 재단 후 접착하여 제작한다. 이 때문에 이음부분이 나 재단부분에 코팅으로 인한 접착이 어려워 고온고압으로 접착을 한다. 이 연구에서는 실리콘코팅 유리섬유막의 접착시 어려움을 보완하기 위해 저온 Plasma를 이용한 처리법으로 방전에 의해 Plasma를 발생시켜 50w, 100w 출력으로 10분, 20분간 처리하여 그 결과를 접촉각과 SEM 관찰을 통해 표면처리를 관찰하였다. Plasma 처리로 인해 실리콘 표면층에 균열이 발생하고 표면이 갈라짐을 확인할 수 있었다. 접촉각측정 결과 Plasma 출력과 시간의 증가함에 따라 접촉각은 감소하였다. 실리콘코팅 원단에 저온 Plasma 처리한 후 표면 특성을 분석하고 원단을 접착을 시켜 박리 강도를 측정함으로써 막구조 원단의 접착력 향상에 대한 연구를 진행하였다. KS K 0533 접착포의 박리 강도 시험방법으로 실리콘코팅 원단의 박리 강도를 측정한 결과 플라즈마 처리 원단이 플라즈마 미처리 원단보다 박리 강도가 향상된 것을 확인할 수 있었다. 저온 Plasma 처리 시간이 증가할수록 표면의 젖음성을 향상시켜 접촉각을 낮추었다. 이는 곧 표면에너지의 증가를 뜻하는 것으로 접착력을 증가시켜 실리콘코팅 원단의 접착성을 시킴으로써 강한 강도와 내구성을 갖춘 막구조물의 개발에 기대되고 있다.

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.152-158
• /
• 2014

It is very important to supply the diesel fuel from fuel tank to combustion chamber in case of cold start procedure. the paraffin hydrocarbons are easily solidified at low fuel temperature and it can be blocking the fuel supply to the high pressure fuel pump. In order to reduce the fuel crystallization (Waxing), it have been used to develop not only cold flow additives but also the proper mounting design of fuel filter. Block heater in the fuel filter assembly have been also contained to improve the cold start and prevent blocking the fuel supply in Common Rail Direct Injection System. we can obtain the fuel pressure drop and fuel flow rate, power consumption of fuel heater to have the cold flow evaluation test with the saperated and composited fuel heater at the low ambient temperature, Due to evaluating cold flow performance of two block heater, we knew that composited package fuel heater was the excellent cold flow performance compared to separated type and obtained the parameters of cold flow.

• Korean Journal of Plant Resources
• /
• v.16 no.3
• /
• pp.218-222
• /
• 2003

This study was carried out to find optimum condition through sterilization methods for cultivation of Neutaribeosut (Oyster mushroom). 1. Yield of additive culture of pine sawdust, cotton and rice hulls at bag­cultivation of Neutaribeosut. was similiar to additive culture of pine sawdust, cotton and pulpe as conventional methods. 2. Yield of Neutaribeosut at low temp. sterilization method as 50 to 6$0^{\circ}C$ and 7days treatment was higher about 18 to 19％ than that of high temp. as 121$^{\circ}C$ and 90 minutes treatment. 3. In case of farmer­cost, low than high temperature sterilization method appeared lowly about 12％. So this method will be of advantage to farmers in both yield and farmer­cost.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.23 no.1
• /
• pp.32-35
• /
• 1978

In order to screen cold tolerant soybean lines, germination at various temperature, and emergence and seedling height at 1$0^{\circ}C$ were investigated. Since the most conspicuous varietal difference of the germination speed was observed at 1$0^{\circ}C$, the germination test at 1$0^{\circ}C$ would be effective in screening cold tolerant lines.

• Journal of Bio-Environment Control
• /
• v.11 no.3
• /
• pp.139-143
• /
• 2002

Cotton Glutathione S-Transferase (GST: EC 2.5.1.18) was cloned and overexpressed in tobacco (Nicotiana tabacum) plants. Northern blot analysis confirmed the successful transformation of cotton gst gene in tobacco plant. Type I and Type ll transcript patterns were identified in transgenic tobacco plants and only Type I transcripts were discussed in this paper, The activity of GST in the type II transgenic plants was about 1.5-fold higher than those of the wild type and non-expresser by using 1-chloro-2,4-dinitrobenzene (CDNB) and reduced glutathione as the substrate. The expression of cotton GST in tobacco plants proved that Gh-5 could be translated into functional protein. Type II transgenic plants produced functional GST in the cells. The effects of cotton GST in the seedlings was evaluated by growing the control and transgenic seedlings at $15^{\circ}C$ in the growth chamber in the light. Overexpressors were grown well compared to the control plants (non-expressors). lo test far tolerance to salinity, seeds of Gh-5 overexpressors and the wild type Xanthi seedlings were grown at 0, 50, 100, 150, and 200 mM NaCl solution. Gh-5 transgenic seedlings showed higher growth rate over control seedlings on 50 and 100 mM NaCl solution. There was no difference in growth rate at 150 and 200mM NaCl concentration.

• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.297-301
• /
• 2003

The hardness of corrugated packaging box decreased during storage period because of high humidity. Therefore, the strength-decreasing factor of corrugated packaging box had to be investigated to determine the compression strength of the corrugated packaging box. This study was conducted to define the characteristics of moisture absorption as well as compression strength of corrugated fiberboard. (1) The moisture content of the corrugated fiberboard was rarely influenced by the kinds of raw materials and water repellent. However, the moisture adsorption of the corrugated fiberboard was shown to be clearly affected by air temperature changes. (2) The moisture content of the corrugated fiberboard was significantly affected by relative humidity. The moisture adsorption of corrugated fiberboard was also greatly influenced by composition of raw materials rather than water repellent. The results indicated that the improvement of raw materials was more effective than the increase of water repellent of corrugated fiberboard to reduce the moisture adsorption of the corrugated fiberboard. (3) The vertical compression strength was significantly decreased with increasing relative humidity. The reduction rate of vertical compression strength was not charged with the increase of relative humidity, which was regardless of kinds of corrugated fiberboard. (4) For improving the strength of the corrugated packaging box, new technique should be found to develop better quality of raw materials. Moreover, the physical construction of corrugated packaging box should be clearly understood because the corrugated packaging box for the agricultural products was usually used for the circumstances of high humidity and low air temperature