• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.15-23
• /
• 2009

Masonry structures that are very strong in compression fail due to the instability of structural shape of geometry rather than the material stress limit. Considering such structural behavior, the use of the limit theorem that focuses on structural collapse mechanisms is more appropriate for the evaluation of the structural safety of stone voussoir arch bridges. This paper is to investigate structural performance of the stone arch bridges constructed using dry construction method in Korea based on the limit theorem and to exploit the result to develop a system for an structural safety margin. It is expected that this study will help us understand structural behavior of stone voussoir arch bridges in Korea. Also, it will provide a guideline to make engineering decision from the viewpoint of the maintenance of cultural heritages.

• Geotechnical Engineering
• /
• v.1 no.2
• /
• pp.17-26
• /
• 1985

This study was carried out for the purpose of comparing in reference to sand drain in the next three different cases. First, The case of drain material (sand pile) has some rigidity during embankment and consolidation. Second, In usual case of no rigidity as a paper drain without permeability during embankment and consolidation Third, Check up clay behavior when above the two cases carried out respectively. This FEM analysis is consisted with Biot's consolidation equation when it is used for Christian Boehmer's numerical technique. The main results are obtained from above the Analysis When sand drain has some rigidity, the lateral and vertical deformation of clay foundation is restrained considerable amount and .exhibited bearing capacity of load as a pile According to the foundation in drained condition and untrained condition, the results are much variable in this analysis method. Also, The behaviors of stress path and pore water pressure met our expectation during , consolidation. This analysis should be considered to put into use of sand drain and design in future.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.299-312
• /
• 2009

Unlike profit-seeking businesses, hospitals provide medical services to promote the public good in a way, and they need a reform of management to ensure sustainable growth in fast-changing medical environments. The key to the managerial reform is enhancing efficiency, and inefficient managerial practices and factors affecting that should be grasped first of all to boost the efficiency of hospital management. But evaluation methods that are prevalent in the private sector are hardly applicable to hospitals. The purpose of this study was to assess hospital efficiency by using a data envelopment analysis(DEA). The 2006 data on 74 residency training hospitals with 500 beds or more were analyzed. The selected input variables included the number of bed, the number of doctors, the number of nurses, the number of medical technicians, personnel expenses, management cost and materials cost. And the selected output variables were the yearly number of outpatients, the yearly number of inpatients, the number of operation cases and earnings. In addition, the influence of the type of hospital establishment, location, the year of foundation and the type of hospital on hospital efficiency was checked as well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4310-4317
• /
• 2014

The HACCP (Hazard Analysis Critical Control Point) system was applied to Handmade Rice Cakes. The main ingredients of rice cakes, work facilities and workers were provided from the KB company located in Seogye-dong Yongsan-gu, Seoul between September 12, 2012 and February 13, 2013. The manufacturing process chart was prepared by referring to the manufacturing process of rice cake manufacturers in general. Microbiological hazard analysis of the raw materials and after the steaming process of rice-cakes showed a safe result. On the other hand, the microorganism test on the manufacturing environment and workers suggested that the microbiological hazard can be reduced through systematic cleaning and disinfection, accompanied by improved personal hygiene based on hygienic education for workers on the management of microorganisms in the working area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.3
• /
• pp.305-310
• /
• 2017

Nowadays, the development of dental scanner and CAD/CAM technology can facilitate the fabrication of hybrid prosthesis. Double scanning technique, scanning a trial prosthesis and master model, made it possible to realize virtual design and simplify the laboratory work. Instead of using the metal or zirconia framework with composite, ceramic or denture tooth, the new high performance polymer Polyetherketoneketone (Pekkton, Cendres+$M{\acute{e}}taux$, Biel, Switzerland) as a framework with Polymethyl methacrylate (PMMA) veneering teeth (Visio-lign, Bredent, Senden, Germany) was used in this case. This case report showed an acceptable treatment outcome and satisfaction of patient using Pekkton and Visio-lign. However, long term clinical evaluation is needed.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.639-643
• /
• 2011

Fry-drying of coal slurry is one of the upgrading low rank coal processes. It consists of slurry mixing, slurry dewatering, solvent recovery and briquetting. Cost estimation and economic feasibility are examined for the upgrading low rank coal process based on capacity of 1 million ton/yr. In case that investment costs are $100,000,000, discount rate is 12%, and service life is 20 years, the results of economic analysis are enough to satisfy the evaluation criteria of investment such as IRR, B/C ratio, NPV and discounted payback period. According to sensitivity analysis, investment value are very sensitive to raw material cost and product price. Since the bituminous coal price is currently soaring, it is expected that the investment value will increase more and more.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4375-4380
• /
• 2015

This study was performed to evaluate a newly proposed heating process of blank, which was used for Crank throw in the diesel engine, and provide design guidelines of heating processes. Non-linear numerical analyses were done using ANSYS program to investigate temperature and thermal stress distributions of blank during heating processes. The heating process consists of two stages; one is a heating stage with 20 hours, and the other is a holding stage with 12 hours, totaling 32-hour heating time. Based on analysis results, it was found that the temperature difference between the center and the surface of blank increased linearly during the heating stage but decreased gradually during the holding stage of heating processes, while max. equivalent stress, $12.5kg/mm^2$, was found at the center of blank after 10-hour heating time. As the guideline of blank heating process, it was recommended to keep the temperature difference between the center and the surface of blank to be within $150^{\circ}C$ when the environment temperature in furnace reaches $650^{\circ}C$ during a heating stage.

• Tunnel and Underground Space
• /
• v.25 no.5
• /
• pp.408-416
• /
• 2015

The collapse of the underground cavities and voids, which were made for developing mineral resources, can cause the subsidence of the ground surface in the residential areas. During the Japanese colonial era and the 1960's mining boom period, lots of mines had been developed indiscriminately in Korea. Due to complicated geological conditions and mining methods, many of dangerous underground mine cavities with steep slopes had been generated at the shallow surface. Due to such conditions, it is difficult to directly apply valid foreign reclamation practice for the cavities in Korea environments. It is necessary to develop the efficient ground stabilization technologies for the Korea underground mine conditions to solve abandoned mine reclamation properly. Therefore, MIRECO and Korea government have been carrying out practical researches and technical developments together with other academic researchers and reclamation business partners, and various practical solutions such as surveying and exploration methods, proper cavity filling materials and reinforcement methods have been developed with application in the mine field. In this article, up to date technologies and R&D trends in the field of mine subsidence prevention technology are broadly reviewed to establish the future direction of a research and development.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.3
• /
• pp.13-25
• /
• 2004

In this paper, We would research and analysis for actual beauty information condition in Korea on the end of July 2004. We make an investigation into 3 beauty subject that Web service were operated by 100% regular school education. 15.5% Private school in 363 teaching institutions, 8.74% of 767 material dealers, 0.38% of 77,546 beauty salons. There are 12 companies of client management program and 3 hair changing programs. It bring to be few of technical beauty information data and creature value added that lack of full-time lecturer, according1y, KBMC and Ministry of Health & Welfare would constitute beauty information commit that make connection of each 3 beauty subjects and web database for technical beauty information data. As a result of unification and communization for beauty information system. It should be take synergy effect for Korean Beauty.

• Journal of the Korea Convergence Society
• /
• v.5 no.4
• /
• pp.147-153
• /
• 2014

To create a personal menu, there are a number of considerations. Personal menus are different depending on the dietary therapy for disease, diet for weight control. In addition, the menu you choose, depending on the personal preference and the season, the weather, current personal feelings may differ. An individual should expect to recommend a balanced diet, taking nutritional status just for health care. In this paper, we propose a personalized menu recommendations System framework to meet such needs. To recommend menus the system receives data of the body's individual circumstances, ingredients situation, environmental conditions, psychological condition, emotional condition and provides a recommended menu by performing the inference using the ontology generated from external application systems. In order to provide such services, Internet of Things (IoT) environment should be the foundation. In this paper, we propose a personalized diet recommendation system framework in the IoT standardization environment that has oneM2M common service platform.