• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.577-589
• /
• 2021

Drone mapping systems can be applied to many fields such as disaster damage investigation, environmental monitoring, and construction process monitoring. To integrate individual sensors attached to a drone, it was essential to undergo complicated procedures including time synchronization. Recently, a variety of composite sensors are released which consist of visual sensors and GPS/INS. Composite sensors integrate multi-sensory data internally, and they provide geotagged image files to users. Therefore, to use composite sensors in drone mapping systems, mapping accuracies from composite sensors should be examined. In this study, we analyzed the mapping accuracies of a composite sensor, focusing on the data acquisition area and pre-calibration effect. In the first experiment, we analyzed how mapping accuracy varies with the number of ground control points. When 2 GCPs were used for mapping, the total RMSE has been reduced by 40 cm from more than 1 m to about 60 cm. In the second experiment, we assessed mapping accuracies based on whether pre-calibration is conducted or not. Using a few ground control points showed the pre-calibration does not affect mapping accuracies. The formation of weak geometry of the image sequences has resulted that pre-calibration can be essential to decrease possible mapping errors. In the absence of ground control points, pre-calibration also can improve mapping errors. Based on this study, we expect future drone mapping systems using composite sensors will contribute to streamlining a survey and calibration process depending on the data acquisition circumstances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.40-47
• /
• 2020

Various technologies, systems, and legal systems are applied to prevent and quickly respond to fire disaster; nevertheless, the damages to life and property caused by fires are not reduced every year. For managing fire disaster, generating spatial information-based safety status map and procuring suitability of attribute information for each position information are essential. The safety status map is generated by deriving the fire safety status assessment factors, indexing, and locating the surveying results through various methods. In this paper, we deal with derivation of building fire safety assessment factors for 3D safety status map. At first, we survey the foreign and domestic fire assessment model cases and its factors, and analyze the applicability of Korean 3D fire safety status map. Next, assessment factors for fire safety assessment model are derived. Assessment factors are derived and categorized by their information collecting activity; factors that can be accessed through basic building information and factors that can be accessed through field survey. As a derivation result, 14 assessment factors were derived over five categories(Industry Risk, Structural Risk, Fire Fighting Facility, Fire Dangerousness, Fire Response Status).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.225-227
• /
• 2022

Now In Seoul, about 75,000 CCTVs are installed in 25 district offices. Each ward office in Seoul has built a control center for CCTV control and is building information such as people, vehicle types, license plate recognition and color classification into big data through 24-hour artificial intelligence intelligent image analysis. Seoul Metropolitan Government has signed MOUs with the Ministry of Land, Infrastructure and Transport, the National Police Agency, the Fire Service, the Ministry of Justice, and the military base to enable rapid response to emergency/emergency situations. In other words, we are building a smart city that is safe and can prevent disasters by providing CCTV images of each ward office. In this paper, the CCTV image is designed to extract the characteristics of the vehicle and personnel when an incident occurs through artificial intelligence, and based on this, predict the escape route and enable continuous tracking. It is designed so that the AI automatically selects and displays the CCTV image of the route. It is designed to expand the smart city integration platform by providing image information and extracted information to the adjacent ward office when the escape route of a person or vehicle related to an incident is expected to an area other than the relevant jurisdiction. This paper will contribute as basic data to the development of smart city integrated platform research.

• The Journal of Bigdata
• /
• v.7 no.2
• /
• pp.1-9
• /
• 2022

In the global era, the importance of imported food safety management is increasing. Address information of overseas food companies is key information for imported food safety management, and must be verified for prompt response and follow-up management in the event of a food risk. However, because each country's address system is different, one verification system cannot verify the addresses of all countries. Also, the purpose of address verification may be different depending on the field used. In this paper, we deal with the problem of classifying a given overseas food business address into the administrative district level of the country. This is because, in the event of harm to imported food, it is necessary to find the administrative district level from the address of the relevant company, and based on this trace the food distribution route or take measures to ban imports. However, in some countries the administrative district level name is omitted from the address, and the same place name is used repeatedly in several administrative district levels, so it is not easy to accurately classify the administrative district level from the address. In this study we propose a deep learning-based administrative district level classification model suitable for this case, and verify the actual address data of overseas food companies. Specifically, a method of training using a label powerset in a multi-label classification model is used. To verify the proposed method, the accuracy was verified for the addresses of overseas manufacturing companies in Ecuador and Vietnam registered with the Ministry of Food and Drug Safety, and the accuracy was improved by 28.1% and 13%, respectively, compared to the existing classification model.

• Journal of Internet Computing and Services
• /
• v.22 no.4
• /
• pp.83-98
• /
• 2021

The purpose of this study to find the factors influencing the fire alarms using IoT firefighting facility management system data of Seoul Fire & Disaster Headquarters, and to present academic implications for establishing an effective prevention system of fire situation. As the number of high and complex buildings increases and former bulidings are advanced, the fire detection facilities that can quickly respond to emergency situations are also increasing. However, if the accuracy of the fire situation is incorrectly detected and the accuracy is lowered, the inconvenience of the residents increases and the reliability decreases. Therefore, it is necessary to improve accuracy of the system through efficient inspection and the internal environment investigation of buildings. The purpose of this study is to find out that false detection may occur due to building characteristics such as usage or time, and to aim of emphasizing the need for efficient system inspection and controlling the internal environment. As a result, it is found that the size(total area) of the building had the greatest effect on the fire alarms, and the fire alarms increased as private buildings, R-type receivers, and a large number of failure or shutoff days. In addition, factors that influencing fire alarms were different depending on the main usage of the building. In terms of time, it was found to follow people's daily patterns during weekdays(9 am to 6 pm), and each peaked around 10 am and 2 pm. This study was claimed that it is necessary to investigate the building environment that caused the fire alarms, along with the system internal inspection. Also, it propose additional recording of building environment data in real-time for follow-up research and system enhancement.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.3-10
• /
• 2002

요즘 측량분야에서 Geomatics 또는 Geoinformatics라는 새로운 용어가 대두되고 있다. 해외의 유수 기관 및 대학교에서도 측량이라는 학과명 또는 기관명을 Geomatics라는 용어로 교체하고 있으며, 이는 측량분야의 다양화와 학제간 연구수행의 필요성을 반영하는 것이다. 최근 45로 일컬어지는 GPS, 원격탐사(RS), GIS, ITS의 경우 각기 독자적인 영역을 구축하기보다는 상호 보완적인 역할을 하며 통합되어 가는 추세이다. 1950년대에 기본적인 위성관측기술 및 계산 기술의 개발을 시작으로 1980년대에 이르러서는 위성 기술은 측지학 및 측량 분야에 적용되기 시작했다. 그 대표적인 것이 GPS(Global Positioning System)로 기존의 천체측정학 방식을 대체하는 유용한 위치결정 수단으로 사용되기 시작했다. DNSS로부터 시작된 GPS는 측지 측량분야, 지구물리학분야, 항법 및 교통, GIS Mapping, 기상 및 해양, 재난 및 레저, 인공위성 궤도결정 등 다양한 분야에 적용되었으며, 특히 2000년 5월 1일 SA가 해제되면서 그 활용도는 더욱 증가하고 있다. 위성원격탐사의 경우 초창기에 중ㆍ저해상도의 다중분광영상에서 시작하여 그 해상도가 꾸준히 향상되어 오늘날 0.61 미터급 고해상도 위성인 QuickBird 위성이 발사되어 운용 중에 있다. 위성영상의 공간해상도, 분광해상도, 방사해상도는 향후 계속 향상될 것이며 이에 따른 방대한 데이터의 처리 문제 및 하드웨어/소프트웨어 지원에 대한 연구가 수반되어야 할 것이다. GPS 및 원격탐사(RS)는 더 이상 독자적인 영역으로서가 아니라 Geomatics를 이루는 중요한 분야로서 타 시스템과의 보완적인 관계로서 통합되어 나갈 것이다. 이를 위해서는 공간정보에 대한 표준화 및 데이터 처리, 통합, 시스템 구축을 위한 기술적 연구가 계속 진행되어야 할 것이다.분 공부상면적보다 늘어났다. 2. 좌표의 이동량이 일률적이지 못하므로 기초점에 대한 문제라고 생각되며, 따라서 도해지적을 수치지적으로 전환함에 있어서 가장 우선되어야 할 사항이 기초점 정비라 하겠다.승이 뚜렷하였다. 따라서 비파 착즙액 첨가 기능성 yoghurt 제조시 비파 착즙액을 10% 첨가하여 혼합 starter로 Str. thermophilus와 Lac. acidophilus 혼합균주를 사용하는 것이 이들 유산균의 증식에 가장 적합한 것으로 나타났다.타났다..297, 0.293, 0.205에서 50일 경과 후 0.612, 0.472, 0.898로 비살균에서 높은 값을 보였다. 따라서 비살균의 경우 저장말기에 TBA값이 높아지는 경향을 보였다. 5. L값은 살균처리의 경우 저장 30일 이후 약간 어두워지는 경향을 보였고, 121$^{\circ}C$ 살균처리에서 높은 값을 보였다. 대체로 저장온도가 높고 저장기간이 길어질수록 약간 밝아지는 경향을 보였다. 적색도는 인삼 첨가구의 경우 상온 및 냉장저장에서 10$0^{\circ}C$ 살균이 121$^{\circ}C$ 처리구 보다 약간 높은 값을 보였다. 저장기간에 따른 적색도의 변화는 인삼과 송이 첨가구에서 비교적 안정적이었다. 황색도는 상온 및 냉장저장에서 저장기간에 따라 약간 감소하는 경향을 보인 후 상온저장 50일 째, 냉장 60일 째 가장 높게 나타났다. 121$^{\circ}C$ 살균처리구가 10$0^{\circ}C$ 처리구보다 약간 높은 경향을 보였다.^{\circ}C$$,에서는 20시간 가열시 0.706$\mu\textrm{g}$/kg으로 가장 높게 생성된 후 서서히 감소하였다. 그러나 산값과 공액이중산값은 계속 증가하는 양상을 나타냈다. 즉 B(a)

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.41-47
• /
• 2007

The first geostationary satellite made by Korea, COMS, has the three different payload ; Meteorological sensor, Oceanographic sensor and Ka-band communication payload. There are Meteorological & Ocean Data Communication Subsystem(MODCS) and Telemetry, Command and Ranging Subsystem(TC&R) as other RF radiation sources. MODCS transmits and receives Meteo and Ocean measurement data from/to earth using L-band and TC&R using S-band. The Ka-band communication payload will provide high-speed multimedia services and communication services for natural disaster such as prediction, prevention, and recovery services in the government communications network.Ka-band beacon is for the earth antenna pointing and the experiment of rain fading. This paper gives the analysis results about the mutual radiation effect on Ka-band communication payload, Ka-band beacon, MODCS and TC&R. Up/Down link power and coupling factor including the geometrical position and distance of antenna, filter rejection and degradation factor due to the different polarization are considered. The results show MODCS and TC&R are compatible for Ka-band communication payload and Ka-band beacon does not interfere with MODCS and TC&R normal operation.

• The KIPS Transactions:PartD
• /
• v.8D no.5
• /
• pp.533-542
• /
• 2001

In this paper, we present a scheduling method for real-time mobile transaction manager in mobile computing environment. The proposed method checks whether a transaction is executable or not. It is able to by considering not only the deadline of real-time data in mobile hosts. And then, it schedules the real-time mobile transactions by making optimal execution window based on the priority queue, while considering transaction value and deadline. Disconnection with mobile hosts is monitored in selecting the transaction for execution. Using the proposed method reduces the number of restarting times after transaction aborts which is caused by the violation of the validity constraints of real-time data. And in has merits of maximizing the sum of values of real-time mobile transactions which meet the deadline. The performance evaluation demonstrates that the number of committed real-time transactions within the deadline is improved by 20%. This method can be used in real-time mobile transaction manager is such environments as cellular communications, emergency medicine information system and so on.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.133-142
• /
• 2010

Many pedestrian or fire evacuation models have been studied last decades for modeling evacuation behaviors or analysing building structures under emergency situations. However, currently developed models do not consider the differences of visibility of pedestrians by obstacles such as furniture, wall, etc. The visibility of pedestrians is considered one of the important factors that affect the evacuation behavior, leading to making simulation results more realistic. In order to incorporate pedestrian's visibility into evacuation simulation, we should be able to give different walking speeds according to differences of visibility. We improved the existing floor field model based on cellular automata in order to implement the visibility. Using the space syntax theory, we showed how we split the indoor spaces depending on the different visibilities created by different levels of structural depths. Then, we improved the algorithm such that pedestrians have different speeds instead of simultaneous movement to other cells. Also, in order for developing a real time simulation system integrated w ith indoor sensors later, we present a process to build a 3D simulator using a spatial DBMS. The proposed algorithm is tested using a campus building.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.58-62
• /
• 2017

There is a growing need for seismic resistance design. But it is controversial that standards of sway brace device in non-structural elements for buildings like pump waterway is vary widely. Therefore, in this study to get a valid range of sway brace device in seismic resistance design, using load test of sway brace device. As a result, load of safe range from 0 to 18.5 kN and under 29.4 kN, no structural fault of sway brace device. And using internet of things get a data of seismic resistance design from sensor node like accelerometer, GPS, tilt sensor and temperature sensor through steps of sampling and prediction. These results will be acceptable for monitoring system for seismic resistance in non-structural elements.