• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.281-304
• /
• 2011

In the energy-climate era, pollution emissions from port activities have a significant issue in international shipping and port community. Thus international organization such as IMO and developed countries are seeking to develop various reduction strategies against air pollution. However Korea has recently conducted several studies concerning air pollution in port industry. The main purpose of the paper is to suggest emission reduction strategies for bulk terminal in Port of Incheon, which handles large amount bulk cargoes as a gateway for the metropolitan area. For this aim, the clean air strategies of the world major ports were considered and air pollution reduction strategies were suggested. The main findings of this paper are as follows. First, the emission reduction strategies for container terminal are should be integrated based on technologies changes, operational changes and market-based measures. Second, the emission reduction strategies for bulk terminal can be effective when use innovative measures during loading, unloading and storage process such as telescopic cascade trimming chute, snake sandwich equipment, dry fog system and dome structure. Finally, investigation on actual conditions of air pollution in Korean ports and development of environmental evaluation scheme for persisting monitoring should be conducted.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1024-1031
• /
• 2012

In the past, the part of development of that is used for the military aviation target or reconnaissance is being extended to the range of application not only reconnaissance but also civilian industry as the introduction of the newest IT technology and the technical evolution. The Civilian low-cost UAV that is expected growth at the market of UAV in the world is accelerated to the extended applicability in the fields. However, The UAV study is recently focused on the Link and The Data bus because the main decision of the civilian UAV system configuration is not suitable to determinate the factory of price. In this paper is analysed the UAV data bus through the simulation in same condition both the CAN Bus which used the automobile industry and the MIL-STD-1553B which is used the aviation industry. As a comparison result, we identified that the CAN Bus of conventional configuration is possible to transmit the data without the need for a separate coupler equipment against the MIL-STD-1553B data. Thus, we identified that the CAN bus is capable to apply as a low-cost UAV internal data bus to optimize configuration and weight than 1553B.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5452-5457
• /
• 2012

It is saving material cost and construction cost by replacing conventional building materials, and It has advantages for aesthetic value. In the Europe, the United States, Japan and other country research about BIPV is actively being carried out and marketability is also being infinity expanding. Arch type PV systems efficiency characteristics is different depending on PV array's directly connection, parallel connection and arches angle, but is a lack of analysis on this nowadays. When the arch type PV system design up, they consider about aesthetic value and they didn't consider about generation efficiency. In this paper, we try to improve the efficiency through optimization of arch type PV system and estimation of the efficiency parameters of the arch type PV system, such as latitude, longitude, temperature, insolation, arch angle and each kind loss from system organization. For improving Arched PV system efficiency, proposed multiple control inverter system, and using simulation tool of Arched PV system "Solar pro", flat-plate type and many arch type PV system configuration the driving characteristics were compared and analyzed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.123-130
• /
• 2016

With the development of fast construction mode in shipbuilding market, the demand on accuracy management of hull is becoming higher and higher in shipbuilding industry. In order to enhance production efficiency and reduce manufacturing cycle time in shipbuilding industry, it is important for shipyards to have the accuracy of ship components evaluated efficiently during the whole manufacturing cycle time. In accurate shipbuilding process, block accuracy is the key part, which has significant meaning in shortening the period of shipbuilding process, decreasing cost and improving the quality of ship. The key of block accuracy control is to create a integrate block accuracy controlling system, which makes great sense in implementing comprehensive accuracy controlling, increasing block accuracy, standardization of proceeding of accuracy controlling, realizing "zero-defect transferring" and advancing non-allowance shipbuilding. Generally, managers of accuracy control measure the vital points at section surface of block by using the heavy total station, which is inconvenient and time-consuming for measurement of vital points. In this paper, a new measurement method based on point clouds technique has been proposed. This method is to measure the 3D coordinates values of vital points at section surface of block by using 3D scanner, and then compare the measured point with design point based on ICP algorithm which has an allowable error check process that makes sure that whether or not the error between design point and measured point is within the margin of error.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.146-153
• /
• 2009

Thanks to computer graphic technology development, graphic design programming is easily accessible by any home computer user today since it is free from the burdens of complicated 알고리듬 or the expensive graphic tools that were required in the past. The term 알고리듬 2.5 is commonly used by computer graphic designers to refer to 2D, a form of pseudo-3D. In this study, by using 2.5D, which was previously utilized for strengthening visual effects and engine efficiency, together with Adobe Photoshop along with After Effects, I will incorporate these into motion graphics. Today, motion graphics dominate the advertisement and image markets. Since viewers have developed higher expectations, a more dynamic 3D space graphic technology is preferred over the outdated 2D basis. In this study, I will produce a 2.5D image which is generated through a vanishing point filter of Adobe Photoshop and After Effects based on still image information and captured at an angle of Axonometric Projection. Also, I will compare the effectiveness of the production process and camera angle flexibility between the previous 3D process and new 2.5 D process.

• Journal of Korea Technology Innovation Society
• /
• v.2 no.2
• /
• pp.219-232
• /
• 1999

연구개발 지원산업은 연구개발 활동을 직·간접적으로 지원하는 산업을 의미한다. 이러한 산업에 대한 개념화는 연구개발 활동의 전문화(professionalization), 분업화(division of labor)가 진행되고 있음을 의미하는 동시에 연구개발체제의 유연성 제고 및 고도화, 효율화가 이루어지고 있음을 나타내고 있다. 우리의 경우 (과학기술혁신을 위한 특별법) 제 15조 등을 통하여 연구개발 지원사업에 대한 특별지원제도의 시행을 명시하고 있으나 현재까지 연구개발 지원사업자를 지정·육성하기 위한 기본현황 파악이나 분석이 이루어지지 않은 실정이다. 본고는 이러한 수요를 반영하여 국내에서의 연구개발 지원산업에 대한 수요를 중심으로 실태를 파악 ·분석하는 동시에 산업지원 육성방안을 제시하고 있다. 국내 연구개발 지원산업의 규모를 추정해 보면 97년 현재 약 3,000억원에서 4,000억원의 규모로 나타나며, 이중 기술정보서비스업이 약 27.0%, 연구장비 및 시험 ·평가 ·검색 ·분석업이 약 38.4%, 연구개발 설계·자문업 등 기타사업이 34.6% 로 나타나고 있다. 연구개발지원 기능은 시험·검사 기능과 기술정보제공 기능이 대부분을 차지하고 있고, 전자의 경우는 내부처리의 비중이 높고 후자의 경우 외부의 전문기관을 이용하는 비중이 높게 나타나고 있다. 특히 기업이 연구개발활동 수행시에 필요한 지원기능을 외부에 위탁할 경우에 느끼는 애로사항은 첫째, 외부 전문위탁기관의 부족 및 정보 미흡이 가장 크고, 둘째, 전문기관의 해외정보력·경쟁력 부족이 다음이며, 공공기관의 지원기능이 미흡하다는 애로사항에 대한 비중이 상대적으로 낮게 나타나고 있다. 연구개발 지원산업을 특별지원·육성하기 위한 기본관점은 특별법의 시행령을 구체적으로 실행하기 위한 시행계획의 수립과 연구개발 지원산업의 육성 시책의 추진 절차의 결정, 사업자 선정, 지원 사항 등으로 제시될 수 있다. 먼저, 기업 연구개발활동의 고도화·효율화를 위해 연구개발 및 기술개량에 필요한 업무 중 기술정보서비스와 연구시험·평가·검사·분석 그리고 중소기업 기술집약화를 지원하는 사업 등을 연구개발 지원산업으로 범위를 정할 필요성이 있다. 다음으로 연구개발 지원사업자를 별도로 선정·인정하는 방식으로 지원해야 할 필요성이 있다. 기존의 산업 지원방식으로는 연구개발 지원기능이 주된 활동으로 인정받을 수 없으므로 국내 연구개발 지원기능의 발전에 한계가 있다. 따라서 취약한 여건을 감안하여 연구개발 지원산업을 육성하지 않게 되면, 각 분야별로 민간사업자의 참여가 거의 이루어지지 않거나, 참여해도 연구개발 지원 기능의 발전보다는 기존의 사업이 주가 될 가능성이 크다. 연구개발 지원 사업자의 지정 지원방식과는 별도로 이루어질 수 있는 지원활동에 대한 지원은 기업회계처리상의 문제와 일관성이 있는 시책추진 및 효과를 기대하기 어렵기 때문에 사전에 동산업의 참여 자격·능력을 갖춘 사업자에 대해서는 제한없이 참여할 수 있도록 Positive System으로 추진해야 할 것이다. 그리고 연구개발 지원사업자에 대한 지원내용을 조세·금융 등 직접적 지원과 타 제도와의 연계지원 그리고 정부구매 등 시장지원 등이 아울러 다양하게 추진될 필요가 있다.

• Korean Security Journal
• /
• no.12
• /
• pp.117-147
• /
• 2006

This study aims to propose efficient way to operate the security guarding system from the perspective of administration, policy, law, institution and operation as to the private security guarding system as the Korean security guarding system needs multifaced analysis and measure to ensure efficient operation. The growth strategy has to be restructured and segmentation market needs to be driven in order to cope with the changing conditions of company from the perspective of administration. And private security guarding service companies must refrain from excessive competition while improving the contracting method such as minimum price bidding, etc. From the perspective of policy, the functions of relevant organizations such as the National Police Agency, security association, etc, and mutual cooperation must expand. Also, the profit generation event needs to be privatized and the more positive perception toward the private security guarding service is necessary. In addition, security exhibition and seminar can be expanded to lay the groundwork for the advancement of private security system. From the legal and institutional perspective, the security guarding service related law must be revised and the certification system must b introduced to cope with the changing requirement. The security guarding instructor system must be strengthened to ensure a faithful and earnest implementation of duty to instruct, supervise and educate security guarding personnel. From the perspective of security guarding system's operation, professional security technique must be introduced and applied, and the volunteer application system must be established. In addition, standard 'security guarding manual' must be crafted, and the equipment for security guarding must be modernized to ensure an efficient operation of private security guarding services.

• Food Science and Preservation
• /
• v.19 no.1
• /
• pp.62-66
• /
• 2012

With the rapid growth of fresh-cut produce market, the South Korean fresh-cut industry is facing the challenge of ensuring food safety. As the estimation of the microbial numbers in fresh-cut produce processing lines (tools, and equipment) using the conventional microbiological techniques takes days, so there is a need for faster and easier monitoring methods. This study was conducted to investigate the use of ATP bioluminescence assay to measure the degree of microbial contamination from three actual fresh-cut processing lines. The samples collected from frech-cut vegetables, and fresh-cut fruits processing plants were tested for the estimation of the bacterial number, using the ATP bioluminescence and microbiological methods. The result of former was transferred to log RLU/100 $cm^2$, and that of the latter was transferred to log CFU/100 $cm^2$. A positive linear correlation between the ATP bioluminescence assay value and aerobic-plate count was found for fresh-cut processing lines, with a correlation coefficient of 0.8772 (n=50). The results of this study indicate that ATP bioluminescence assay can be used to monitor microbial contamination in fresh-cut produce processing plants, and can help improve the hygiene therein.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.632-637
• /
• 2017

The vehicle lubricant occupies upto 35% in a total lubricant market and engine oil occupies upto 77% in the vehicle lubricant market in Korea. A suitable quality management of the circulating engine oil is necessary for driver and engine protection. But, KS and synthetic engine oil products (involved over 30% synthetic oil) are exempt to any quality management under Petroleum and Alternative Fuel Business Act. It is also known that synthetic oils such as PAO (poly alpha olefin) have excellent properties and performance like anti-wear, varnish control and oxidation stability than those of mineral oils. For this reason, PAO has been used for an engine oil, rotary screw and reciprocating compressor in addition to heavy duty and other extreme service applications. In this study, our research group analyzed the chromatogram pattern for the mineral oil, PAO and mineral oil involved a typical ratio of PAO using SIMDIST (simulated distillation). In the SIMDIST chromatogram, the mineral oil showed a broad peak, while PAO showed a sharp typical peak. Also the oil with a large viscosity grade exhibited a long retention time due to the heavy molecular weight and high boiling point. In particular, the blended mineral oil with 20% PAO sample showed a distinctly different pattern compared to that of using the conventional mineral oil. For monitoring PAO contents in distributing engine oils, we analyzed the SIMDIST for 27 kinds of engine oils which were popularly sold in Korea. The analytic results indicate that all kinds of engine oils showed that PAO contents were below 20% in engine oil products. Moreover, the PAO titled product was found to have a small amount of PAO. Thus, we conclude that the related laws for the proper quality management of synthetic oils are needed to be established.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.258-263
• /
• 1995

미래 정보와 시대에서 중추적인 역할을 할 광관련 멀티미디어 장비들은 최근 관련 산업계에서 주목을 받기 시작하고 있고 특히 기존 VTR(Video Tape Recorder) 시장을 대체할 차세대 DVDR(Digital Video Disk Recorder)는 기술전쟁이라고 할 정도로 선진 기업의 연구가 치열해지고 있다. DVDR 시스템에서는 필요한 정보들을 레이저빔을 이용한 광학신호로 바꾸어 광디스크에 기록, 재생하는 광픽업이 절대적으로 필요하게 된다. 그런데 광픽업의 위치추종기구인 Actuator는 정확한 위치추종(.+-.1.$\mu$m 오차이내)을 할 수 있는 성능이 요구되며 서보의 특성상 20KHz 이하에서 불필요한 모우드가 가진되지 않는 정밀부품이어야 하므로 Actuator 각 부품의 동적인 특성을 명확히 규명할 필요가 있다. 따라서 본 연구에서는 우선 Actuator 각 부품과 가동부 전체의 중량 및 진동해석을 통해 동특성을 조사하였다. 그리고 Actuator의 중요한 기본성능중 하나인 구동감도 확보여부를 검토할 필요가 있기 때문에 유한요소법 프로그램인 ANSYS를 이용하여 자기회로 부분에 대한 해석을 구하였다. 또한 가동부와 자기회로 등 하위부품을 조립하는 과정에서 발생하는 조립오차로 인해 불필요한 공진과 회전형상이 야기될 수 있으므로 동특성 및 문제점 파악을 위한 민감도 분석이 필요하다. 따라서 본 연구에서는 가동부의 관성 모멘트 값과 강체에 대한 일반식을 이용한 자체 프로그램을 작성하여 조립공차를 구하였다. 이와같은 과정을 통해 구해진 설계값을 바탕으로 실제 제작된 Actuator에 대해서는 비접촉식 측정방법을 통해 동특성값을 측정하였고 이를 해석값과 상호 비교하였다.동강성행렬법(dynamic stiffness matrix method)을 이용하여 해석하고자 한다. 수준임이 입증되었다. 본 연구의 결과를 토대로우리나라 젊고 건강한 남성에게 적합한 무게상수는 작업자군에 대하여 25.05kg, 학생군에 대하여 20.24kg 으로 나타나 이는 미국 NIOSH 안전기준과 대체로 일치함을 발견하였다.ive structures utilized in Client/server architecture for distribution and cooperative processing of application between server and client this study presents two different data management methods under the Client/server environment; one is "Remote Data Management Method" which uses file server or database server and. the other is "Distributed Data Management Method" using distributed database management system. The result of this study leads to the conclusion that in the client/server environment although distributed application is assumed, the data could become centralized (in the case of file server or database server) or decentralized (in the case of distributed