• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.485-500
• /
• 2002

Hydraulic model was developed to analyze the complex flow due to channel structures, tide, and tributaries in the lower Han river and Imjin river. DWOPER-2K model which can automatically process the data transformation in the model was developed as the 1-D hydraulic routing model. Observed data in tidal zone and the recent channel geometry data were collected for hydraulic model. And the flow over the Jamsil and Singok submerged weir was analyzed properly and roughness coefficient was optimized to each regions and each discharges. By the results of verification of the model, the model developed in this study may contribute to improvement of the accuracy of flood forecasting and channel management because this model can efficiently and properly analyze the various kind of flow occurred in the region of the lower Han river and Imjin river.

• 한국해양학회지
• /
• v.26 no.1
• /
• pp.13-23
• /
• 1991

For the purpose of examining the depositional sedimentary environments in the Han River estuary and around the Kyunggi Bay posterior to the Han river's developments, a hydrological and sedimen-tological survey was carried out. According to the hydrological and sedimentological conditions, the studied area can be divided into 3 depositional sedimentary environments: Fluvial, Estuarine and coastal-Bay. Posterior to the Han river's developments, however, the alterations of hydrodynamic condition in the Han river have caused a substantial change of the sedimentary environments in the lower Han river and its estuary. That is, the contents of total suspended sediment anterior to the Developments decreased from 37mg/l (in the lower Han River) and 500-1750 mg/l (at the Kanghwa Bridge) to 18 mg/l and 208-1142 mg/l posterior to the developments. these changes seem to have caused the siltation near the sin-gok Underwater Dam. Thus the characters of the boundary condition between the fluvial and the estuarine environments have rapidly changed. It is considered that these changes result mainly from the construction of the two underwater dams for the maintenance of the water level of the Han river. As the estuary is a transition zone between land and sea, these changes in the Han River estuary might affect the sedimentary environments around the Kyunggi Bay. In order to verify the effects of these changes, it is necessary that a detailed survey be carried out around the Han River estuary including the Imjin and Yesong River estuaries.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.507-514
• /
• 2011

A numerical model has been developed by employing a finite element method to simulate the depth-averaged 2-D dispersion of the heat pollutant, which is an important pollutant material in natural streams. Among the finite element methods, the Streamline Upwind/Petrov Galerkin (SUPG) method was applied. Also both linear and quadratic elements can be applied so that irregular river boundaries can be easily represented. To show the movement of heat pollutants, the reaction term describing heat transfer was represented as an equation in which sink/source term is proportional to the difference between the equilibrium temperature and water surface temperature. The equation was expressed so that the water surface temperature changes according to the temperature transfer coefficient and the equilibrium temperature. For the calibration of the model developed, analytic and numerical results from a case of rectangular channel with full width continuous injection have been compared in a steady state. The comparisons showed that the numerical results were in good agreement with analytical solutions. The application site was selected from the downstream of Paldang dam to Jamsil submerged weir, and overall length of this site is about 22.5 km. The change of water temperature caused by the discharge from the Guri sewage treatment plant has been simulated, and results were similar to the observed data. Overall it is concluded that the developed model can represent the water temperature changes due to heat transport accurately. But the verification using observed data will further enhance the validity of the model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.393-400
• /
• 2011

The mass transport is very complicated at the area which has the macro tide and complex geometry such as Gyeonggi bay. Especially, the long period current has a strong influence on the estuarine ecosystem and the long-term distribution of substances. The long period current is caused by several external forcing, whose unique characteristic varies spatially and temporally. The variation characteristics of long period current is analysed and its generation mechanism is studied. The tidal nonlinear constituents such as overtide and compound tide are generated due to nonlinear interaction and it causes mean sea level setup. The tidal wave propagating up into estuary is transformed rapidly by decrease of cross-sectional area and depth. Therefore the mean sea level is getting rise toward upriver. The high and low tide level is similar between down-river(Incheon) and up-river(Ganghwa) during neap tide when the tidal deformation is decreased. The tidal phase difference between two tidal stations causes a periodic fluctuation of sea level difference. The low water level of Ganghwa station during spring tide does not descend under EL(-)2.5 m, but the low water level of Incheon fall down under EL(-)4.0 m. The variation of tidal range and its sea level are increased during spring tide. It is found that the long period current $M_{sf}$ is quite similar to that of sea level difference between the two tidal stations. It means that the sea surface inclination caused by the spatial difference of tidal deformation is important forcing for the generation of long period current.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.3 s.14
• /
• pp.43-50
• /
• 2004

This study had been performed to analyze flushing effects for instantaneous contaminants input with changing dam discharge in River. RMA-2 and RMA-4 models were applied to the downstream part of the Han River(from Jamsil submerged weir to Singok submerged one) The longitudinal dispersion coefficient of $50m^2/s$ was used. The four cases of dam discharges were selected as $500m^3/s,\;1000m^3/s,\;1500m^3/s$ and $2000m^3/s$, respectively, for 1 hour. The drought flow was fixed $200m^3/s$ in the Han River. The arrival time and the concentration of contaminant, the area of dispersion were estimated with RMA-4 model in the downstream part of the Han River. The arrival time which the concentration of contaminants become under 1ppm was analyzed with the stagnant and the instantaneous inflow contaminant at the section of Sungsan Bridge. The more increasing a dam discharge, the more short a dilution time of contaminant. The relation between the dam discharge and dilution time shows linearity. The instantaneous contaminant input was sensitively affected by the dam discharge than the stagnant contaminant one in the river. If it is tried to flush with a temporally increased dam discharge, it should be understood the range of overflowed contaminant dispersion from main channel to tributary channel.

• Journal of Korea Water Resources Association
• /
• v.38 no.5 s.154
• /
• pp.401-413
• /
• 2005

This study analyzed the hydraulic effects of Singok submerged weir in the lower Han River. 1-D hydraulic flood routing model was used and calibration and verification were performed using 8 flood or nonflood events. Flow characteristics were analyzed using various outflows of Paldang Dam and tidal data of the Yellow Sea. Water level increase effects by establishment of Singok submerged weir were as following, when maximum flood tidal was 2.4m, highest water level increased about 0.65m, and lowest water level increased about 1.25m in the downstream of Jamsil submerged weir. In Hangang Bridge, due to the Singok submerged weir, when maximum flood tidal was 2.4m, tidal range was 0.07m and decrement of tidal range was about $90\%$. And when maximum flood tidal was 5.5m, tidal range was 1.6m and decrement of tidal range was about $35\%$. When the outflow of Paldang Dam was over 20,000cms, tidal range was below about 0.06m, and tidal effect did not appear hardly.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.201-205
• /
• 2005

미국과 일본 등 많은 나라들이 연안역에 대한 오염총량관리제를 실시하고 있으며 우리나라 역시 90년도 초반부터 환경부와 국립환경연구원에 의하여 4대강을 대상으로 내륙에 대한 지자체 단위의 오염총량관리제가 추진되고 있다. 연안해역에서도 최근 해양오염방지법의 개정으로 특별관리해역 지정 등 특정 연안해역에 영향을 미치는 육역을 포함하는 연안역 통합관리제가 해양수산부에 의하여 추진되고 있다 또한 외국의 사례로서 미국 체사피크만에서는 오염총량관리제를 포함하는 연안역 통합관리제 수립 및 운용을 위하여 GIS 및 모델 package로 구성된 시스템을 구축 활용하고 있으며, 이런 GIS 및 모델 package로 구성된 시스템을 바탕으로 연안역 통합관리를 위한 기본적인 자료를 수집 분석하고 정책 수립의 방향을 제시하고 있다. 하지만 우리나라에서는 아직까지 연안역 통합관리를 위한 기초 자료도 많이 부족하고 이런 기초 자료를 토대로한 분석 도구인 GIS-modeling 시스템 개발도 매우 미미한 실정이다. 따라서 본 연구에서는 GIS를 이용하여 오염원의 발생 및 배출부하 산정 과정을 공간적으로 분석하여 환경관리에 응용할 수 있는 방안을 제시하고자 한다. 또한 효율적인 연안의 오염원 관리를 위하여 기존 환경부 및 관련 기환 자료를 활용하여 잠실 수중보에서 한강 하구의 세부 오염원자료를 수집하여 GIS 기반의 오염원데이터베이스를 구축하고, 오염부하산정모델을 개발한 후, 구축된 정보의 효율적인 관리와 분석을 위한 GIS 프로그램을 개발하였다. 아울러 육역에서의 오염물질 배출에 따른 연안역 수질의 모의를 통해 육역과 연안역에 대한 효율적인 통합관리방안을 제시하고자 한다.사용될 수 있는 블루투스 서비스와 서비스 속성을 기술한 XML 문서에서 블루투스 기기에 적합한 내부 정보를 생성하는 생성기를 설계하고 구현을 하였다.보다는 현저히 낮았다. 총 휘발성 유기화합물읜 농도는 실내가 실외 보다 높았다(I/O ratio 2.5). BTEX의 상대적 함량도 실내가 실외보다 높아 실내에도 발생원이 있음을 암시하고 있다. 자료 분석결과 유치원 실내의 벤젠은 실외로부터 유입되고 있었고, 톨루엔, 에틸벤젠, 크실렌은 실외뿐 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을