• Journal of Radiation Protection and Research
• /
• v.39 no.1
• /
• pp.21-29
• /
• 2014

A new cold neutron triple-axis spectrometer (Cold-TAS) was recently constructed at the 30 MWth research reactor, HANARO. The spectrometer, which is composed of neutron optical components and radiation shield, required a redesign of the segmented monochromator shield due to the lack of adequate support of its weight. To shed some weight, lowering the height of the segmented shield was suggested while adding more radiation shield to the top cover of the monochromator chamber. To investigate the radiological effect of such change, we performed MCNPX simulations of a few different configurations of the Cold-TAS monochromator shield and obtained neutron and photon intensities at 5 reference points just outside the shield. Reducing the 35% of the height of the segmented shield and locating lead 10 cm from the bottom of the top cover made of polyethylene was shown to perform just as well as the original configuration as radiation shield excepting gamma flux at two points. Using gamma map by MCNPX, it was checked that is distribution of gamma. Increased flux had direction to the top and it had longer distance from top of segmented shield. However, because of reducing the 35% of the height, height of dissipated gamma was lower than original geometry. Reducing the 35% of the height of the segmented shield and locating lead 10cm from the bottom of the top cover was selected. After changing geometry, radiation dose was measured by TLD for confirming tester's safety at any condition. Neutron(0.21 ${\mu}Svhr^{-1}$) and gamma(3.69 ${\mu}Svhr^{-1}$) radiation dose were satisfied standard(6.25 ${\mu}Svhr^{-1}$).

• Archives of design research
• /
• v.17 no.2
• /
• pp.95-104
• /
• 2004

Creativity is a important keyword for users as well as for main design organization who needs it. But little attention has been given to the aspect of user's creativity, also there has been a few attempt to apply it into design development until now. Nowadays in design areas, user's experiences and actions are changing the passive states receiving meanings into the active states creating meanings voluntarily. It is resonable to suppose that creative stage is important for users and they have the possibility of new ideas of uses and creating new productions. User's experiences of objects includes that of being formed or supported previously and that of voluntary interpretations acquired for himself, which it may be the possibilities predicted in design process or unknown user's action areas. It is likely that creative use process by themselves are the actions applied and deviated from usability and function by main design organization, also creative productions are arranged and made by users. These have a scope of examination and research in probability that is occurs frequently in user. In this research, approaching with a term, 'User gestures', User gestures are the characteristic action areas based on user's voluntary behaviors, where are revealed a unessential and non-operational function as a action itself and various transformation and creation of products as a outcome of action. This fact proves clearly that user gestures have a worth of alive spectrum to observe aspects of user culture and could be a attractive approach to seek easily new design concept for designer and developer. A further direction of this study will be following areas, Ethnography methods research of user gestures, Cultural research to phenomenon of user design and UGSBD(User gesture scenario based design) research. And it seems probable that they are applied in design development as follows, User initiative customization products, User participatory recycling products and creativity-experience design.

• Korean Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.272-279
• /
• 2011

Copper cyanide is a chemical produced in large quantities with 2,500 tonnes being produced in 2006. It is mainly used for electroplating copper, particularly alkali-Cu plate and brass plating. The purpose of this study is to reassess the physicochemical properties and environmental fate of copper cyanide based on reliable data and and to conduct an ecotoxicity test according to the OECD test guidelines as an initial environmental risk assessment (need to state where this was done). Metal containing inorganic substances are not subject to degradation, biodegradation or hydrolysis. Aquatic toxicity tests of copper cyanide were conducted according to OECD test guideline 201, 202 and 203 for green algae, daphnia, and fish, respectively. The following acute toxicity test results were obtained for aquatic species: 0.089 mg $L^{-1}$ (Algae, 72 Hr-$EC_{50}$); 0.21 mg $L^{-1}$ (flea, 48 Hr-$LC_{50}$); 0.62 mg $L^{-1}$ (Fish, 96 Hr-$ErC_{50}$). The chemical possesses properties indicating a hazard for the aquatic environment (acute toxicity in fish, daphnia and algae below 1.0 mg $L^{-1}$). As a result of this study, copper cyanide has become a candidate for detailed risk assessment. Countries that produce this chemical in significant quantities are recommended to perform specific assessments.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.180-185
• /
• 2003

The increase of traffic over a bridge has been emerged as one of the most severe problems in view of bridge maintenance, since the load effect caused by the vehicle passage over the bridge has brought out a long-term damage to bridge structure, and it is nearly impossible to maintain operational serviceability of bridge to user's satisfactory level without any concern on bridge maintenance at the phase of completion. Moreover, bridge maintenance operation should be performed by regular inspection over the bridge to prevent structural malfunction or unexpected accidents front breaking out by monitoring on cracks or deformations during service. Therefore, technical breakthrough related to this uninterested field of bridge maintenance leading the public to the turning point of recognition is desperately needed. This study has the aim of development on automated inspection system to lower surface of bridge superstructures to replace the conventional system of bridge inspection with the naked eye, where the monitoring staff is directly on board to refractive or other type of maintenance .vehicles, with which it is expected that we can solve the problems essentially where the results of inspection are varied to change with subjective manlier from monitoring staff, increase stabilities in safety during the inspection, and make contribution to construct data base by providing objective and quantitative data and materials through image processing method over data captured by cameras. By this system it is also expected that objective estimation over the right time of maintenance and reinforcement work will lead enormous decrease in maintenance cost.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.157-165
• /
• 2006

The change of external/internal factors of the cell rquires specific biological functions to maintain life. Such functions encourage particular genes to jnteract/regulate each other in multiple ways. Accordingly, we applied a linear decomposition model IFSA, which derives hidden variables, called the 'expression mode' that corresponds to the functions. To interpret gene interaction/regulation, we used a cross-correlation method given an expression mode. Linear decomposition models such as principal component analysis (PCA) and independent component analysis (ICA) were shown to be useful in analyzing high dimensional DNA microarray data, compared to clustering methods. These methods assume that gene expression is controlled by a linear combination of uncorrelated/indepdendent latent variables. However these methods have some difficulty in grouping similar patterns which are slightly time-delayed or asymmetric since only exactly matched Patterns are considered. In order to overcome this, we employ the (IFSA) method of [1] to locate phase- and shut-invariant features. Membership scoring functions play an important role to classify genes since linear decomposition models basically aim at data reduction not but at grouping data. We address a new function essential to the IFSA method. In this paper we stress that IFSA is useful in grouping functionally-related genes in the presence of time-shift and expression phase variance. Ultimately, we propose a new approach to investigate the multiple interaction information of genes.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.1025-1038
• /
• 2010

Carrot ($Daucus$ $carota$ L. var. $sativa$) is one of the most widely used crops in the world. Moreover it is an important crop because of its high content of ${\beta}$-carotene, well-known as the precursor of vitamin A carotenoid. However, seed-hair which is generated in epidermal cell of seeds inhibits absorption and germination. For that reason, carrot seeds are commercialized after mechanical hair removal process. To overcome such cumbersome weaknesses, new breeding program for developing hairless-seed carrot cultivar has been needed. Therefore, in this study, cDNA libraries from seeds of short-hair seed phenotype CT-ATR615 OP 666-13line and hairy seed CT-ATR615 OP-CK1-9 line were constructed and expression patterns related to generation of seed-hair were analyzed by comparison of EST sequences. Differential EST sequence results between two lines were classified into FunCat functional categories based on the results of BlastX search. Higher expression quantities belonging to metabolic category were shown on short-hair seed line than hairy-seed one. Differential expression quantities between those two lines in the protein folding and stabilization, subcellular localization categories were supposed to contribute variously on the generation of seed-hair. We confirmed 50 and 59 SSR sites, and 2 SNP sites by analyzing EST sequences in two lines; thereafter, we designed SNP and SSR primer sets from these EST sequence information as a molecular marker. These markers are thought to be used in research of molecular markers for classification of carrot family and related to various traits, as well as seed-hair characteristic.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.4
• /
• pp.125-134
• /
• 2001

The purpose of this study is to provide basic information for a future countermeasure municipal and to establish several wastes policy after investigating solid wastes from Sunchon City. In addition, this research can be supported to manage of recycling plant and to reuse plant of each wastes. Results are as bellows after checking up and analysis type of waste in Sunchon city Unit solid waste generation rate from single family is $0.50kg/person{\cdot}day$, and total solid wastes are 41.9ton/day. Unit solid waste generation rate from apartments is $0.45kg/person{\cdot}day$, and solid wastes generation is 55.5ton/day. Unit solid waste generation rate from agricultural is $0.22kg/person{\cdot}day$ and total solid wastes are 13.5ton/day. That show total amount of municipal solid wastes from residential are 110.9ton/day. Unit solid waste generation rate from traditional markets is $1.85kg/person{\cdot}day$, and solid waste total volume is 5,400kg/day. Unit solid waste generation rate from small store is $2.03kg/person{\cdot}day$, and solid waste total are 25,101kg/day. Therefore, this show that total wastes are 30.50kg from downtown and commercial area. Solid waste quantity from Industrial area (Factory region) is 8.5ton and in case of school and hospitals are 7.2kg/day and 3.0kg/day. Solid waste amount from Institutional is 6.6kg/day. Food wastes were eliminated from municipal solid wastes as standard 63.4ton/day, and combustible wastes were 126.9ton/day. If it schedule about 5 years (by 2006) as durable year for food wastes treatment plant, it is expected 42.5ton/day for treatment capacity. We can judge that it is effective to be set 2 lines equipment ${\times}25ton/day$ as treatment ability under considering unexpected working condition such as any repair, trouble and an electrical load. If it schedule about 10 years (by 2011) as durable year for food wastes treatment plant, it is expected 150 ton/day for treatment capacity. We can conclude that it is effective to be set 2 lines equipment ${\times}80ton/day$ as treatment ability under considering working condition such as low loaded operating and the repair for incineration.

• Clinical and Experimental Pediatrics
• /
• v.52 no.10
• /
• pp.1153-1160
• /
• 2009

Purpose:To evaluate the risk factors for mortality and prognostic factors in pediatric hemato-oncology patients admitted to the pediatric intensive care unit (PICU). Methods:We retrospectively reviewed the medical records of pediatric hemato-oncology patients admitted at the PICU of the Asan Medical Center between September 2005 and July 2008. Patients admitted at the PICU for perioperative or terminal care were excluded. Results:Total 88 patients were analyzed. Overall ICU mortality rate was 34.1%. Mean age at PICU admission was $7.0{\pm}5.7$ years and mean duration of PICU stay was $18.1{\pm}22.2$ days. Hematologic diseases contributed to 77.3% of all the primary diagnoses, and the primary cause of admission was respiratory failure (39.8%). The factors related to increased mortality were C-reactive protein level (P<0.01), ventilation or dialysis requirement (P<0.01), and hematopoietic stem cell transplantation (P<0.05). In all, 3 scoring systems were investigated [Number of Organ System Failures (OSF number), the Pediatric Risk of Mortality III (PRISM III) score, and the Sequential Organ Failure Assessment (SOFA) score]; higher score correlated with worse outcome (P<0.01). The Oncological Pediatric Risk of Mortality (O-PRISM) scores of the 21 patients who had received hematopoietic stem cell transplantation were higher among the non-survivors, but not statistically significant (P=0.203). Conclusion:The PRISM III and SOFA scores obtained within 24 hours of PICU admission were found to be useful as early mortality predictors. The highest OSF number during the PICU stay was closely related to poor outcome.

• Journal of KIISE:Software and Applications
• /
• v.33 no.2
• /
• pp.143-153
• /
• 2006

Microarray which enables us to obtain hundreds and thousands of expression of gene or genotype at once is an epoch-making technology in comparative analysis of genes. First of all, we have to measure the intensity of each gene in an microarray image from the experiment to gain the expression level of each gene. But it is difficult to analyze the microarray image in manual because it has a lot of genes. Meta-gridding method and various auto-gridding methods have been proposed for this, but thew still have some problems. For example, meta-gridding requires manual-work due to some variations in spite of experiment in same microarray, and auto-gridding nay not carried out fully or correctly when an image has a lot of noises or is lowly expressed. In this article, we propose Hierarchical Grid Alignment algorithm for new methodology combining meta-gridding method with auto-gridding method. In our methodology, we necd a meta-grid as an input, and then align it with the microarray image automatically. Experimental results show that the proposed method serves more robust and reliable gridding result than the previous methods. It is also possible for user to do more reliable batch analysis by using our algorithm.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.488-505
• /
• 2007

The purposes of this research are twofold; 1) to verify spatial differences of tectonic movement using the spatial distribution of earthquakes, and 2) to infer mechanisms that generate spatial accumulation patterns of earthquakes in the Korean Peninsula. The first part of this sequential paper (Park, 2007) argues that the Korean Peninsula consists of four geostructural regions in which tectonic deformation and consequent geomorphological development patterns are different from each other Since this conclusion has been made by terrain analyses alone, it is necessary to verify this suggestion using other independent geophysical data. Because earthquakes are results of movement and deformation of land masses moving in different directions, the distribution of earthquake epicenters may be used to identify the direction and rates of land mass movement. This paper first analysed the spatial distribution of earthquakes using spatial statistics, and then results were compared with the spatial arrangement of geostructural regions. The spatial distribution of earthquakes in the Korean Peninsula can be summarized as the followings; firstly, the intensity of earthquakes shows only weak spatial dependency, and shows large difference even at adjacent regions. Secondly, the epicenter distribution has a clear spatial accumulation pattern, even though the intensity of earthquake shows a random pattern. Thirdly, the high density area of earthquakes shows a clear 'L' shape, passing through Pyeongannam-do, centered at Pyeongyang, and Hwanghae-do, Seosan and Pohang. The correlation coefficient between the density of earthquakes and distance from geostructral region boundaries is much higher than those between the density of fault lines and distance from tectonic division boundaries. Since fault lines and tectonic divisions in the Korean Peninsula are the results of long-term geological development, there is an apparent scale discrepancy to find significant correlations with earthquakes. This result verifies the research hypothesis that the Korean Peninsula is divided into four geostructral regions in which each has its own moving direction and spatial deformation characteristics. The existence of geostructural regions is also supported by the movement parrerns of land masses estimated from the GPS measurements. This conclusion is expected to provide a new perspective to understand the geomorphological developments and the earthquake occurrences in the Korean Peninsula.