• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.105-118
• /
• 2022

The demand for information related to 3D spatial objects model in metaverse, smart cities, digital twins, autonomous vehicles, urban air mobility will be increased. 3D model construction for spatial objects is possible with various equipments such as satellite-, aerial-, ground platforms and technologies such as modeling, artificial intelligence, image matching. However, it is not easy to quickly detect and convert spatial objects that need updating. In this study, based on spatial information (features) and attributes, using matching elements such as address code, number of floors, building name, and area, the converged building DB and the detected building DB are constructed. Both to support above and to verify the suitability of object selection that needs to be updated, one system prototype was developed. When constructing the converged building DB, the convergence of spatial information and attributes was impossible or failed in some buildings, and the matching rate was low at about 80%. It is believed that this is due to omitting of attributes about many building objects, especially in the pilot test area. This system prototype will support the establishment of an efficient drone shooting plan for the rapid update of 3D spatial objects, thereby preventing duplication and unnecessary construction of spatial objects, thereby greatly contributing to object improvement and cost reduction.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.217-233
• /
• 2022

The remains found in Geumcheok-ri, Gyeongju are located in close proximity to the Ancient Tombs in Geumcheok-ri, Gyeongju (Historic Site) which were built between the late 5th and early 6th centuries, and these tombs are known to belong to the powerful rulers of that area. Using metallurgical techniques, this study was conducted on the iron objects obtained from the excavated remains in Geumcheok-ri, Gyeongju which are presumed to have a close relation to the nearby ruins that played an important role in the growth of Silla. To identify differences in manufacturing techniques based on the purpose of the iron objects, eight objects were selected after classifying them by use and the microstructure and non-metallic inclusions were investigated. The analyses results confirmed that the manufacturing process involved forging iron with a high or low carbon content to produce a particular shape, and that the carburization process was applied to iron post forging a shape to increase its strength when necessary. The mechanical properties were improved by selectively applying the steelmaking method and the heat treatment technique considering the functions of the parts, and the low temperature reduction was applied to the smelting process. Furthermore, in comparison with the iron objects excavated from the remains located in the center of Gyeongju and its outskirts, it is confirmed that there is similarity in the smelting and manufacturing techniques between these objects.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.305-313
• /
• 2023

With an increasing interest in the commercialization of research results in the present societal climate, especially in the construction industry, preliminary product analysis plays a critical role when introducing a new product to the market. It significantly influences the product's success or failure. In this context, this study aims to investigate the utility of Importance-Performance Analysis (IPA) as a management strategy tool for preliminary analysis in the commercialization of new architectural technologies. The study specifically assesses a smart ball product engineered for pipeline inspection. The evaluation is carried out based on product quality, convenience, and usability categories. Seventeen factors are recognized as sub-items, and a survey is conducted among relevant experts and consumer groups. From the survey, four key items are chosen: "Keep up the good work," "Concentrate here," "Low priority," and "Possible overkill." Suitable strategic measures are derived for each item. By conducting a correlation analysis between product importance and performance, this study offers a method to establish priority directions for future development. This analysis assists in identifying areas that necessitate improvement or additional focus to increase the product's commercial potential. On the whole, this study contributes to understanding and applying Importance-Performance Analysis as a valuable tool in the preliminary analysis and commercialization of novel technologies in the field of architecture.

• Journal of Popular Narrative
• /
• v.25 no.4
• /
• pp.111-134
• /
• 2019

Since This study is about game novel. I'm going to discuss the flow and features of game novels. Game novels developed in Korea, the game industry developed and made it possible. Fantasy novels, Muhyeop novels, and the generation of games met, so game novels could develop. By looking at the trends of game novels, I want to lay the foundation for the study of popular literature genre. The reason behind the emergence of game novels is the meeting of the game generation and the novel. The types of game novels can be distinguished according to the 'location of the main characters' and 'the narrative style'. It is not the best, but it is the minimum work to identify the genre. The biggest characteristic of game novels is their connection to games. It also uses the system of the real game. Another characteristic is that a variety of variations are possible with other genres. Game novels were influenced by fantasy novels and Muhyeop novels. Game novels now hold a solid place in the realm of popular literature. But the limits are also clear. It is the repeated use of game novel progression. Here are the limitations that game have to overcome. In addition, active research should be carried out. This study is intended to promote research on these game novel genres.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.250-251
• /
• 2023

The pallet, typically a form of tertiary packaging, is a flat structure used as a base for the unitization of goods in the supply chain. In addition, standard pallets such as T-11 and T-12 are used throughout the logistics industry to reduce the cost and enhance the efficiency of transportation. However, in the case of special cargo, it is impossible to handle such cargo using a standard pallet due to its size and weight, so many have developed and are now using their customized pallet. Therefore, this study suggests a pallet size optimization method to calculate the optimal pallet size, which minimizes the loss of space on a pallet. The main input features are the specifications and the storage quantity of each cargo, and the optimization method that has modified the Neighborhood Search Algorithm calculates the optimal pallet size. In order to verify the optimality of the developed algorithm, a comparative analysis has been conducted through simulation.

• Therapeutic Science for Rehabilitation
• /
• v.12 no.4
• /
• pp.67-80
• /
• 2023

Objective : This study aimed to investigate the current status of physical therapy in children and adolescents. Methods : Sixty questionnaires from physical therapists treating children and adolescents with disabilities were analyzed. The questionnaire consisted of questions on physical therapy, participants, satisfaction, and the assessment of pediatric and adolescent physical therapy. Descriptive statistics and frequencies were used to investigate the current status, participants, and satisfaction. Differences between physical therapy participation difficulty, importance-ability of major aspects of pediatric and adolescent physical therapy, and therapy goal frequency were analyzed using paired T-test. Results : 11 to 15 cases (66.7%) and one-on-one treatment (95.0%) were performed independently (95.0%). The main ages of the subjects were preschool and school, the diagnoses were brain lesions and developmental delay, and treatment was conducted for up to 20 years or older. Satisfaction with pediatric and adolescent physical therapy was high (70.0%), as was the intensity of work (71.7%). Neurodevelopmental therapy, gait training, and goal-directed rehabilitation were the main treatments, and Gross Motor Function Measures of 88 and 66, respectively, were used. Respondents said that current fee system is inadequate (66.1%) and appropriate fee system is needed. Conclusion : This study extensively investigated the content of and factors related to pediatric and adolescent physical therapy. Based on the current situation, efforts to improve the expertise and continuity of pediatric and adolescent physical therapists and apply the latest treatment techniques are required.

• Journal of Internet of Things and Convergence
• /
• v.9 no.6
• /
• pp.93-98
• /
• 2023

In paddy rice farming, water management is a critical task. To suppress weed emergence during the early stages of growth, fields are deeply flooded, and after transplantation, the water level is reduced to promote rooting and stimulate stem generation. Later, water is drained to prevent the production of sterile tillers. The adequacy of water supply is influenced by various factors such as field location, irrigation channels, soil conditions, and weather, requiring farmers to frequently check water levels and control the ingress and egress of water. This effort increases if the fields are scattered in remote locations. Automated irrigation systems have been considered to reduce labor and improve productivity. However, the net income from rice production in 2022 was about KRW 320,000/10a on average, making it financially unfeasible to implement high-cost devices or construct new infrastructure. This study focused on developing an IoT-Based irrigation valve that can be easily integrated into existing agricultural infrastructure without additional construction. The research was carried out in three main areas: Firstly, an irrigation valve was designed for quick and easy installation on existing agricultural pipes. Secondly, a power circuit was developed to connect a low-power Cat M1 communication modem with an Arduino Nano board for remote operation. Thirdly, a cloud-based platform was used to set up a server and database environment and create a web interface that users can easily access.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.534-546
• /
• 2023

If the disc cutter is excessively worn or damaged, it becomes incapable of rotating and efficiently cutting rockmass. Therefore, it is important to appropriately manage the replacement cycle of the disc cutter based on its degree of wear. In general, the replacement cycle is determined based on the results of manual inspection. However, the manual measurements has issues related to worker safety and may lead to inaccurate measurement results. For these reasons, some foreign countries are developing the real-time measurement system of disc cutter wear by using different sensors. The ultrasonic sensors, eddy current sensors, magnetic sensors, and others are utilized for measuring the wear amount of disc cutters. In this study, the applicability of eddy current sensors for real-time measurement of wear amount in TBM disc cutters was evaluated. The distance measurement accuracy of the eddy current sensor was assessed through laboratory tests. In particular, the accuracy of eddy-current sensor was evaluated in various environmental conditions within the cutterhead chamber. In addition, the measurement accuracy of the eddy current sensor was validated using a 17-inch disc cutter.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.410-418
• /
• 2023

Recently, advancements and commercialization in the field of maritime autonomous surface ships (MASS) has rapidly progressed. Concurrently, studies are also underway to develop methods for automatically surveying the condition of various on-board equipment remotely to ensure the navigational safety of MASS. One key issue that has gained prominence is the method to obtain values from analog gauges installed in various equipment through image processing. This approach has the advantage of enabling the non-contact detection of gauge values without modifying or changing already installed or planned equipment, eliminating the need for type approval changes from shipping classifications. The objective of this study was to identify a dynamically changing indicator needle within noisy images of analog gauges. The needle object must be identified because its position significantly affects the accurate reading of gauge values. An analog pressure gauge attached to an emergency fire pump model was used for image capture to identify the needle object. The acquired images were pre-processed through Gaussian filtering, thresholding, and morphological operations. The needle object was then identified through Hough Transform. The experimental results confirmed that the center and object of the indicator needle could be identified in images of noisy analog gauges. The findings suggest that the image processing method applied in this study can be utilized for shape identification in analog gauges installed on ships. This study is expected to be applicable as an image processing method for the automatic remote survey of MASS.

• Journal of Practical Engineering Education
• /
• v.16 no.3_spc
• /
• pp.309-325
• /
• 2024

The purpose of this study was to develop self-evaluation criteria for objective verification and performance analysis of LINC 3.0. To achieve this goal, evaluation indicators in the fields of human resources development and skill development and commercialization were developed and their validity was verified. We investigated previous evaluation-related studies and similar cases to construct an evaluation model and system and develop indicators. The validity of the developed evaluation indicators was secured through two round Delphi surveys. As a result of the research, LINC 3.0 evaluation indicators can be divided into the field of human resources development and skill development and commercialization. A total of 66 evaluation indicators were developed. CIPP in the field of human resources development was developed with 13 categories and 38 evaluation indicators, and CIPP in the field of skill development and commercialization was developed with 12 categories and 28 evaluation indicators. The significance of this study is that it suggests a way to increase the objective verification and validity of the university industry-academia cooperation model by developing self-evaluation indicators for the LINC 3.0 project. The evaluation indicators developed in the research need to be continuously upgraded based on field usability, and it is necessary to improve the quality and competitiveness of university education by sharing and spreading excellent affairs.