• Journal of Environmental Impact Assessment
• /
• v.27 no.3
• /
• pp.251-266
• /
• 2018

This study predicted the effect of operation pattern of flood control dam on water quality. Flood control dam temporarily impound floodwaters and then release them under control to the river below the dam preventing the river ecosystem from the extreme flood. The Hydrological Simulation Program Fortran (HSPF) and the Environmental Fluid Dynamics Code (EFDC) were adapted to predict the water quality before and after the dam construction in the proposed reservoir. The non-point pollutant delivery load from the river basin was estimated using the HSPF, and the EFDC was used to predict the water quality using the provided watershed boundary conditions from the HSPF. As a result of water quality simulation, it is predicted that the water quality will be improved due to the decrease of pollution source due to submergence after dam construction and temporary storage during rainfall. There would be no major water quality issues such as the eutrophication in the reservoir since the dam would impound the floodwater for a short time (2~3 days). In the environmental impact assessment stage of a planned dam, there may be some limitations to the exact simulation because the model can not be sufficiently calibrated. However, if the reliability of the model is improved through the acquisition of actual data in the future, it will be possible to examine the influence of the water environment according to various operating conditions in the environmental impact assessment of the new flood control dam.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.56-65
• /
• 2009

In Korea, Red pine(Pinus densiflora) stands at a very important place, historically, culturally, and emotionally and it is one of the tree species that can produce domestic timber as forest resources economically. The growing space for Red pine forest in Korea is gradually reducing while the space for deciduous tree forests including oak series is gradually increasing. Thus, it is required that the research work should be done on renewal for pine forest retention and its related forest management practices. This research aims at developing stable, sustainable management forests and inducing nature renewal by grasping growth environment and succession process through the pattern of stand and structure analysis of the red pine(Pinus densiflora) for central region. The pine forests in central region were classified into four communities, such as Acer pseudo-sibolianum, Quercus acutissima, Lindera erythrocarpa, and Pinus densiflora and they are showing different characteristics by pattern according to their growing district. There appeared a lot of red pines in the upper layer, but there existed high weight of broad-leaved forest tree species, such as oak series in the middle layer and the appearance of the red pine was meager in the lower layer. Therefore, it appears that the red pine has a high influential ecological strength in terms of correlativity; however, if the red pine in tree layer is dead by aging in nature state with the lapse of time, it is considered that oak species, such as Quercus mongolica, Quercus variabilis, and Quercus serrata will be dominant below sub-tree layer. In addition, there appear differences in characteristics and growth pattern of the red pine forest depending on stand pattern, so it is considered that a differential application method should be employed in the pine forest management.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.52-52
• /
• 2012

최근 선진국을 중심으로 제조기술의 산업혁명이라고 불릴 정도로 큰 파급효과가 기대되는 자기조립기반의 산업공정기술을 확보하기 위한 많은 노력과 연구들이 활발하게 진행되고 있다. 자기조립(Self-Assembly) 현상은 자연에서 일어나는 자발적인 힘으로 원자 또는 분자 단위까지 구조물을 제어하고 bottom-up 방식(상향식: 원자/분자 스케일의 나노구조를 배열/조립하여 원하는 형태의 패턴을 만들어 내는 방식)으로 원하는 구조물을 설계/제작할 수 있는 능력을 가지고 있다. 기초적인 과학으로부터 출발한 자기조립기술은 최근 자기조립 응용개발에서 많은 성과를 이루어내면서 산업화 가능성을 크게 하고, 과학계와 산업계의 많은 관심을 불러일으키고 있다. 반도체 산업기술을 예측하는 ITRS 로드맵(2005년)에 의하면 directed self-assembly 방법이 새로운 미래 패터닝 기술로 개발되어 2016년경에 사용되고, 자기조립소재로 제작된 다양한 응용소자들은 새로운 미래소자로 개발될 것으로 예상하고 있다. 이에 맞추어 국내 기업들도 diblock copolymer를 이용한 나노패터닝 기술 확보를 위한 연구를 진행하고 있다. 또한 IBM은 자기조립기술을 반도체공정에 실험적으로 적용하여 자기조립기술이 생산 공정에 부분적으로 적용될 가능성이 크다는 것을 보여주었다. 산업계와 함께 학계의 연구센터에서는 산업화를 위한 자기조립 집적화 공정(Integrated process) 개발을 이루기 위하여 체계적으로 연구를 실시하고 있다. 미국의 Northeastern 대학의 CHN(Center for high-rate Nanomanufacturing) 연구센터는 자기조립 집적화에 용이한 새로운 개념의 소자를 제안하고 이를 집적화하기 위한 다양한 공정을 개발하고 있으며, Wisconsin 대학의 NSEC(Nanosacle Science and Engineering Center) 연구센터는 diblock copolymer를 이용한 나노패터닝 기술 개발에서 획기적인 결과를 도출하여 산업계에 적용될 가능성을 높이고 있다. 이와 같은 결과들로부터 앞으로의 자기조립기술에 대한 연구는 3차원 구조물을 제작할 수 있는 집적화 공정에 집중될 것이고, 이를 위하여 새로운 개념의 단순한 구조의 응용소자개발도 함께 추진될 것으로 판단된다. 또한 실용 가능성이 큰 집적화 공정으로 개발하기 위하여 기존의 top-down 방식을 접목한 bottom-up 방식의 자기조립 집적화 공정이 개발될 것으로 예상하고 있다. 이와 함께 자기조립공정은 반복되는 구조를 쉽게 제작할 수 있는 장점을 가지고 있어 다양한 응용소자 [태양전지(solar cell), 연료전지(fuel cell), 유연성 있는 전자기기(flexible electronics), 화면표시 장치(display device)] 제작에 쉽게 이용되어 새로운 산업을 창출할 수 있는 가능성을 보이고 있다. 본 자기조립 연구 센터에서는 이와 같은 자기조립 특성을 제조공정에 적용하여 혁신적인 제조공정기술을 확보하고자 연구를 진행하고 있다. 그러므로 본 발표에서 이와 같은 연구 흐름과 함께 본 센터에서 진행하고 있는 자기조립 제조방법을 소개하고자 한다. 이와 함께 자기조립방법을 이용하여 제작된 다양한 응용소자 개발 결과를 발표하고, 이를 top-down 방식과 접목하여 집적화공정으로 개발하는 전략을 함께 소개하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.719-727
• /
• 2013

Four-step travel-demand modeling based on a trip-level has been widely used over many decades. However, there has been a wide variance between forecasted- and real-travel demands, which leads less reliable on the model implications. A primary reason is that person's real travel behavior is not properly captured throughout the model developments. An activity-based modeling (ABM) approach was proposed and developed toward increasing the accuracy and reality of person's travel behavior in the U.S. since 1990', and stands as a good alternative to replace the existing trip-based approach. The paper contributes to the understanding of how the ABM approaches are dissimilar to the trip-based modeling approach in terms of estimation units, estimation process, their pros and cons and etc. We examined three activity-based travel demand model systems (DaySim, CT-Ramp, and CEMDAP) that are most commonly applied by many MPOs (Metropolitan Planning Organization). We found that the ABM approach can effectively explain multi-dimensional travel decision-makings and be expected to increase the predictive accuracy. Overall, the ABM approach can be a good substitute for the existing travel-demand methods having unreliable forecasts.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.5
• /
• pp.537-546
• /
• 2013

Traffic congestion in existing tunnels has increased due to increased traffic volume and enlarged vehicles. Enlarging existing tunnels has advantages over constructing new tunnels by reducing land purchasing costs as well as minimizing natural environment destruction. In fact, many overseas projects for enlarging existing tunnels have been reported. Thus, it appears that the demand on enlarging existing tunnels continues to rise in Korea in near future. Nonetheless, the studies related to the enlarged tunnels have been relatively rare since there have been few tunnel enlargement projects in Korea. In the present study, the tunnel behavior and the stability of rock pillar when enlarging existing parallel tunnels were investigated by performing FE analysis and using existing theory and empirical relationships. Four different enlarging cases, depending on the enlargement types and directions, were examined in the study. According to the results, for the tunnels with the same pillar width after enlarged, the uni-laterally enlarged tunnel indicated 5 to 20% higher crown settlement compared to the bi-laterally enlarged tunnel, and for the tunnel with the narrowest pillar, the highest shotcrete stress was observed. Also, the strength/stress ratio for rock pillar was more than 1.0 for all four enlargement cases, and the Matsuda's method was found to give higher strength/stress ratio by about 50% compared to the Peck's method.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.23-35
• /
• 2012

The optimum location of the prehistoric sites of Ulsan Metropolitan City are investigated by both quantile and natural breaks methods through GIS, and the settlement pattern is studied based on the possibility of presence of the prehistoric sites which are also analyzed with these methods. Such factors including elevation, slope, distance from the nearest water, aspect, geological features, soil drainage classes, subsoil and land use recommended are employed in the analysis. The optimum geographical environment is the place where it includes the water-base in the area that is the southern aspect of the gentle slope land of lowland. The geology is the Quaternary alluvium. The drainage class is fine and the deep soil saturn is the fine loamy soil and the recommendation of land use is the area that is the field. As a result of the forecast of distribution, the prehistoric sites showed the higher possibility of presence in the downstream region where the Taehwa river and Dongcheon river join because the region come close to the watercourse and the drinking water use is easy. And the aspect and elevation is the low area. The alluvium accumulated from the upper stream of the Taehwa river and Dongheon river was made roomily, the area where is suitable for the farming life. Therefore, this region is judged that the possibility of presence of the prehistoric sites is high.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.1
• /
• pp.40-48
• /
• 2013

This study evaluated the close crop recycling method by using the extract from defective onions. The mixture of the diluted extract (1/500) and nutrients was applied seven times on the onion leaves without spilling it onto the field. The yield and quality of the onions produced by this method (recycle) were compared to those grown organically (control) and conventionally (normal). The yield from the recycling field was increased significantly by 9% compared to that of the control field, while it was decreased by 11% compared to the normal field (p < 0.05). This lower yield was explained by the differences of the mulching vinyl and the fertilizers between the treatments which effect the onion growth during the winter. The content of quercetin in the onions from the recycling filed was increased significantly by 34% and 44% compared to those of the control and normal field, respectively (p < 0.05). It seemed that minerals and biologically active substances in the defective onion extract were effective in increasing the onion growth. In terms of soil microbial biomass, arbuscular mycorrhizal fungi was increased significantly in the recycle field by 40.1% and 30.6% compared to those of the control and normal fields, respectively (p < 0.05). On the other hand, microbial stress (cy19:0/18:1w7c) was decreased in the recycle field by 21.0% and 14.1% compared to those of the control and normal fields, respectively.

• Journal of the HCI Society of Korea
• /
• v.10 no.2
• /
• pp.21-26
• /
• 2015

NUI (Natural User Interface) system interprets the user's natural movement or the signals from human body to the machine. sEMG (surface electromyogram) can be observed when there is any effort in muscle even without actual movement, which is impossible with camera and accelerometer based NUI system. In sEMG based movement recognition system, the minimal number of electrodes is preferred to minimize the inconvenience. We analyzed the decrease in recognition accuracy as decreasing the number of electrodes. For the four kinds of movement intention without movement, extension (up), flexion (down), abduction (right), and adduction (left), the multilayer perceptron classifier was used with the features of RMS (Root Mean Square) from sEMG. The classification accuracy was 91.9% in four channels, 87.0% in three channels, and 78.9% in two channels. To increase the accuracy in two channels of sEMG, RMSs from previous time epoch (50-200 ms) were used in addition. With the RMSs from 150 ms, the accuracy was increased from 78.9% to 83.6%. The decrease in accuracy with minimal number of electrodes could be compensated partly by utilizing more features in previous RMSs.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.283-292
• /
• 2006

The Plastic material had been developed in the middle of the 19th century as an alternative material. Along with the development of the electrical engineering industry, it cropped up into center stage as an effective material and has increasingly expanded its use. As such, the plastic material has bound deep-seated ties with the design activities of industrial products, coming into the main material for a variety of industrial designs. Despite its dose affinity to design function in terms of its materialistic property, we have rarely seen examples of intensive study on the realtionship between plastics and designs. This study aims to find the importance that the substance affects industrial products in designs along with the development of plastic materials. With the objective in mind, we made a review of the streamline stylishness that had flourished in the twenties and thirties of the 19th century. Through this study, we understand that the plastic material has a close realtionshop with design activities in three different aspects. First, its amorphous state of nature makes it possible to change into any shape one desires in plastic surgery, which feature in turn influences the moulding of any design forms. Second, the plastic material is best suited to mass-manufacture, which induces to reduce the cost of production. Hence, the expansion of design industry. Third, the plastic material allows the multiple variety of colors, sensitivity, gloss and patterns and infinitely large possibility ranging from natural senses to human senses with the result that numberless diversity of designs cdould come into being.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.535-535
• /
• 2012

하천 환경의 변화는 자연적으로 일어나기도 하지만, 우리나라 경우 대부분 하천 정비, 골재 채취, 수중보와 하구둑 등 하천시설물의 건설, 그리고 댐 및 교량건설 등 인위적인 요인에 의한 변화가 지배적이다 이렇게 환경이 변화하면 하천의 평형 상태는 파괴되며 하천의 평형 상태를 복원하는 과정에서 하천의 침식 또는 퇴적이 일어나며 이러한 과정의 총체적인 결과로서 하상변동이 일어나게 된다. 하상변동은 단기적인 면에서는 하천에서의 취수, 배수, 주운동 하천관리에 직접적인 영향을 주며, 장기적인 면에서는 하천시설물의 안정, 홍수위 및 지하수위 변화, 홍수터와 같은 하천부지의 변화 등 하천 및 유역 관리에 광범위한 영향을 주고 있다 하천의 유황 및 하상재료의 인위적인 변화에 의한 장기적인 하상변동 효과를 예측하고 분석하는 것은 하천계획 및 관리 면에서 매우 중요하다. 또한 하천 정비사업 등에 의한 영향을 제대로 평가하기 위해서는 비교적 단기간의 홍수 또는 호우 사상에 대한 단기적인 하상변동 효과를 정확하게 예측하는 것은 필수적이다. 외국에서는 하상변동 예측의 필요성을 일찍이 인식하여 다수의 하상변동 예측모형이 개발되어 하천 실무에 사용되고 있으며, 국내에서도 하천 흐름의 등수 역학적 해석을 위해 여러 가지 수치 기법들에 대한 연구가 진행되고 발전되어져 왔다. 현재 국내에서는 측량 자료이용과 모형적용의 용이성을 이유로 1차원 점변 부정류 해석프로그램인 HEC-RAS 모형을 많이 사용하고 있으며 대부분의 하천 정비 기본계획 수립에 있어서도 1차원 해석 모형을 적용하고 있는 실정이다. 국내에 서 수행된 하상변동 예측에 관한 연구들은 대부분 1차원 모형이므로 하천의 사행의 진행이나 유사의 횡방향 분포 등은 고려할 수 없다. 또한 하상변동 계산 시 이동상 부분의 전체가 균일하게 상승 또는 하향하는 것으로 가정하기 때문에 흐름이 급변하는 데 적용하는 것은 적합하지 않다. 따라서 본 연구에서는 4대강살리기 사업이 진행중인 낙동강유역 구미보지점을 대상으로 2차원 흐름 및 하상변동 수치모형인 CCHE2D 모형을 적용하여 50년, 100년, 200년 빈도별로 모의를 실시, 보설치 전 후의 하상변동을 비교 분석 하였다. 모의 결과 보설치 후의 경우 보 상류단은 전반적으로 퇴적의 양상을 보였으며, 보 하류단의 만곡부의 경우 홍수량이 증가함에 따라 유속 및 소류력이 비슷한 패턴으로 증가하여 침식이 관찰되었다. 특히 보 직하류의 경우 수문을 기준으로 다량의 침식이 있음을 보였으며, 침식이 계속 진행된다면 보유실과 같은 심각한 결과를 초래할 수 있기 때문에 침식을 방지 할 수 있는 다양한 장치가 마련되어야 할 것으로 판단된다.