• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1530-1534
• /
• 2006

원격탐사 기법을 이용한 수심측정은 하나 혹은 그 이상의 파장대에서 수심과 반사되는 에너지 사이의 관계를 찾아내는데 달려 있다. 수심 정보를 획득하기 위한 스펙트럼의 최적 파장길이는 다중분광영상(Landsat 7 ETM)의 blue band에 해당하는 약 $0.48{\mu}m$이며, 이 band를 이용하여 연안의 수심을 측량하기도 한다. 하지만 단일밴드에 의해서 측정된 값을 이용한 수심측정은 해저표면에 의한 반사에 심각한 영향을 받을 수 있기 때문에 신뢰할 만한 결과를 얻을 수 없다. 따라서 본 연구에서는 해수와 관련한 여러 가지 변수들을 결정하기 위하여 다량의 실측 데이터를 필요로 하지 않는 선형다중밴드방식을 이용하여 2개의 Landsat 영상으로 태화강 하구의 수심정보를 추출하고 태화강 본류에 대한 수심정보획득과 하상변동에 대한 분석 가능성을 파악하였다. 그 결과 임의로 선정한 표본 50개 지점에 대한 영상분석에 의한 수심값과 해도의 수심값의 잔차 평균이 각각 2.29m, 2.43m로 비교적 큰 잔차를 보였다. 하지만 20m 미만의 수심대의 표본만을 확인한 결과 각각 1.73m, 1.88m로 잔차 평균이 크게 감소하였다. 2000년, 2003년 영상을 비교한 결과, 1번 2번 3번 지역에서 평균적으로 약 1.838m정도 2003년 수심이 감소한 것으로 나타났다. 본 연구에서 20m 미만의 수심 측량은 낮은 해상도의 위성영상이라도 실제 수심과 근접하고 있는 것으로 판단 할 수 있었다. 이것으로 넓은 지역을 경제적으로 수심자료를 획득할 수 있는 위성영상분석을 이용한 수심측정은 활용성이 있는 것으로 나타났다. 하지만 해저표면의 형태와 해수면의 상태 등 수심측정에 미치는 영향에 관한 실측데이터에 대한 자료수집과 분석이 선행된다면 더욱 좋은 결과를 도출할 수 있을 것으로 판단된다.A}$는 최대암모니아 섭취률을 이용하여 구한 결과 $0.65d^{-1}$로 나타났다.EX>$60%{\sim}87%$가 수심 10m 이내에 분포하였고, 녹조강과 남조강이 우점하는 하절기에는 5m 이내에 주로 분포하였다. 취수탑 지점의 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할 수

• Radiation Oncology Journal
• /
• v.17 no.2
• /
• pp.172-178
• /
• 1999

Purpose : To measure the basic structural characteristics of radiation oncology facilities in Korea during 1997 and to compare personnel, equipments and patient loads between Korea and developed countries. Methods and Materials : Mail serveys we conducted in 1998 and data on treatment machines, personnel and peformed new patients were collected. Responses were obtained from the 100 percent of facilities. The consensus data of the whole country were summarized using Microsoft Excel program. Results: In Korea during 1997, 42 facilities delivered megavoltage radiation theraphy with 71 treatment machines, 100 radiation oncologists, 26 medical physicist, 205 technologists and 19,773 new patients. Eighty nine percent of facilities in Korea had linear accelators at least 6 MeV maximum photon energy. Ninety five percent of facilities had simulators while five percent of facilities had no simulator, Ninety one percent of facilities had computer planning systems and eighty three percent of facilities reported that they had a written quality assurance program. Thirty six percent of facilities had only one radiation oncologist and thirty eight percent of facilities had no medical physicists. The median of the distribution of annual patients load of a facility, patients load per a machine, patients load per a radiation oncologist, patients load per a therapist and therapists per a machine in Korea were 348 patients per a year, 263 patients per a machine, 171 patients per a radiation oncologist, 81 patients per a therapist, and 3 therapists per a machine respectively. Conclusions : The whole scale of the radiation oncology departments in Korea was smaller than Japan and USA in population ratio regard. In case of hardware level like linear accelerators, simulators and computer planning systems, there was no big differences between Korea and USA. The patients loads of radiation oncologists and therapists had no significant differences as compared with USA. However, it was desirable to consider the part time system in USA because there were a lot of hospitals which did not employ medical physicists.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.117-128
• /
• 2012

The Government of South Korea has continued its effort to fixate virtuous circle of economic growth and climate change response to cope with international demands and pressure to commitment for greenhouse gas reduction effectively. Nationally, Korean Government has established "Enforcement of the Framework Act on Low carbon, Green Growth"(2010. 4. 13) to implement national mid-term GHG mitigation goal(30% reduction by 2020 compare to BAU), which established the foundation for phased GHG mitigation by setting up the sectoral and industrial goal, adopting GHG and Energy Target Management System. Also, follow-up measures are taken such as planning and control of mid-term and short-term mitigation target by detailed analysis of potential mitigation of sector and industry, building up the infrastructure for periodic and systematic analysis of target management. Likewise, it is required to establish more accurate, reliable and detailed sectoral GHG inventory for successfully establishment and implement the frame act. In comparison to the $CO_2$ emission, Especially fluorinated greenhouse gases (HFCs, PFCs, $SF_6$) are lacking research to build the greenhouse gas inventories to identify emissions sources and collection of the applicable collection activities data. In this study, with the refrigeration and air conditioning sector being used to fluorine refrigerant(HFCs) as the center, greenhouse gas emission estimation methodology for evaluating the feasibility of using this methodology look over and mobile air conditioning, fixed air conditioning, household refrigeration equipment, commercial refrigeration equipment for the greenhouse gas emissions were calculated. First look at in terms of methodology, refrigeration and air conditioning sector GHG emissions in developing country-specific emission factors and activity data of the industrial sector the construction of the DB is not enough, it's 2006 IPCC Guidelines Tier 2a (emission factor approach) rather than the Tier 2b (mass balance approach) deems appropriate, and each detail by process, sectoral activity data more accurate, if DB is built Tier 2a (emission factor approach) can be applied will also be judged. Refrigeration and air conditioning sector in 2009 due to the use of refrigerant greenhouse gas emissions ($CO_2eq.$) assessment results, portable air conditioner 1,974,646 ton to year, fixed-mount air conditioner 1,011,754 ton to year, household refrigeration unit 4,396 ton to year, commercial refrigeration equipment 1,263 ton to year was estimated to total 2,992,037 tons.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.85-95
• /
• 2008

The purpose of this study is to reduce a high speed driving, it is a large scale traffic accident as the most dangerous fact on the highway. So traffic accidents related to high speed driving, a number of automated speed enforcement system has been established up to now. At present automated speed enforcement system in Korea control overspeed vehicle only in the specific spot. Because the drivers generally recognize the previous stated fact. therefore, we need speed control by new system. it is necessary to establish the automated traffic enforcement system based on the travel time speed. In conclusion, we obtain the desired results about automated traffic enforcement system based on the travel time speed. it is important that the number of traffic accidents has decreased and try to secure the safety of traffic.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.9-18
• /
• 2006

This paper presents schematically the monitoring system installed in Yongjong Bridge, a self-anchored suspension bridge located in the expressway linking Seoul and Incheon International Airport. Automatic measurement of instrumented civil engineering structures is now widely applied for behavior monitoring during construction in field as well as long-term monitoring for lifetime assessment of bridge structures. A representative example of results that can be acquired through structural health monitoring system is presented by means of data measured during a few years after the opening of the bridge. In order to effectively measure the tension force for hangers that have relatively short length or high tension force, a static tension measurement device has been explored. Newly equipped railway system on the existing bridge results in change of dead load, consequently dynamic characteristics have also been changed. This result can be detected by the monitoring system during and after railway construction.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.284-288
• /
• 2009

The International Convention for the Control and Management of Ships Ballast Water & Sediments was adopted by consensus at a diplomatic conference of IMO at 2004. To prepare the Ballast Water Management Convention, fundamental technologies such as treatment system, type approval, risk assessment and various technical informations for formulation of the regulation for national strategy shall be developed. The information item of voyage and discharge of ship's ballast water are gathered by visiting vessel and agent at port. Using the 97 results by ships type characteristic analysis on the relation between loading/unloading and discharge/uptake of ballast water, the amounts of discharge/uptake of ballast water at each port and all of country in Korea are predicted. Hence, It is apparent that the uptake of ballast water is predicted to about 70 million ton in total of Busan, Incheon, Kwangyang and Ulsan ports at 2006 which is over 3 times than discharges.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.113-121
• /
• 2013

In this paper, simulations were carried out to determine the efficiency of the rotation efficiency according to the draft of waterwheel in open rectangular channel. In the small hydroelectric generators to get the highest efficiency of waterwheel is very important. But the presence of various elements(free water surface flow, non-uniform velocity distribution because of the waterways wall friction etc) makes it difficult to create a mathematical formula. In this paper, we made a scale model and perform a physical simulation where the draft, gradient and flux is variable. Scale modelling with 10-step draft, 3-step gradients and 2-step flux, as well were constructed then computerized automatic experimental system were configured to acquire the rotational efficiency vs. draft of itself. Rotational efficiency is analyzed as for the draft of waterwheel using the acquired data by varying the gradient and flux of canal. Reviewing the analyzed data, it is confirmed that phenomena of efficiency shown at previous and present experiment is similar and revealed that computerized system shows more sophisticated numerical figures.

• Journal of Internet Computing and Services
• /
• v.6 no.1
• /
• pp.105-114
• /
• 2005

This paper describes a new measuring technique by analysing multiple time-series patterns. This paper's goal is that extracts a really measured value having a sample pattern which is the best matched with an inputted time-series, and calculates a difference ratio with the value. Therefore, the proposed technique is not a recognition but a measurement. and not a hardware but a software. The proposed technique is consisted of three stages, initialization, learning and measurement. In the initialization stage, it decides weights of all parameters using importance given by an operator. In the learning stage, it classifies sample patterns using LBG and DTW algorithm, and then creates code sequences for all the patterns. In the measurement stage, it creates a code sequence for an inputted time-series pattern, finds samples having the same code sequence by hashing, and then selects the best matched sample. Finally it outputs the really measured value with the sample and the difference ratio. For the purpose of performance evaluation, we tested on multiple time-series patterns obtained from etching machine which is a semiconductor manufacturing.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.21-21
• /
• 2002

독일, 미국, 일본 등 세계 주요 선진국운 도금전문 중소기업들이 각 산업분야의 첨단 핵심부품의 기능화, 신기능-신제품 창출에 크게 이바지하고 었으며, 도금 및 표면처리 관련 전문연구소와 전문고굽 기술인력이 정부 및 사회단체의 지원으로 끊임없이 관련 기술의 연구와 개발에 여념이 없으며, 관련업계와의 교류에 있어서도 활발하다. 특히 도금설비, 자동화장치, 폐수처리 등 도금관련기술에 1970년대부터 연구개발을 시작 하여 실용화하고 있으며, 최근에는 분자규모 표면제어기술과 제 4세대 도금기술(저가 격-고품질-환경융화-개성화)의 연구 및 상품화를 구축하고 었다. 또한, 도금약품 분야 도 오랜 공업화 역사와 강력한 기초산엽을 기반으로 하여 고효융, 고성능화를 설현 실용화단계에 접어들었으며, 설비자동화와 함께 세계적 환경문제와 관련된 무공해, 저 공해화의 연구를 통해 세계시장을 지속적으로 선점하고 있는 실정이다. 국내의 경우, 근대 공업화의 늦은 출발과 수출을 통한 산업발전에 기인된 대기업 중 심의 산업구조, 그리고 수출목표 지향의 제품생산, 조립위주 등의 원인으로 산업기반 기술인 도금기술과 이와 관련된 기초, 핵심기술이 여전허 낙후되어 있으며, 해외의존 도에 있어서 지리척으로 가까운 일본의 영향이 크고, 기타 선진국으로부터 기술도입, 원자재수입에 의해 영위되어 오고 있는 실정이다 또한 영세성 소규모 업체로 구성되어 기술개발 자체도 수요의 한정 및 연관 산업과의 정보부족으로 실효성이 적으며­관련 전문 연구기관, 연구장벼 및 전문 기술인력이 선진국과 비교하여 절대 부족한 현실에 놓여었다. 연구시설, 연구인력의 절대부족, 기초연구 재원 및 국가적 전략지원 연구 및 기본 INFRA 구축이 부족한 국내 현실을 인식하여 한국기계연구원에서는 업계가 직면하고 있는 표면처리 관련기술 제반문제에 대한 실질적이고 다양한 내용 즉, 기술지도 및 지원, 기술훈현 및 연수, 품질-시험 인증을 위한 실험.측정장비의 구입 및 업계와의 공동활용, 국내.외 최신기술 정보자료의 수집과 신속제공, 국내.외 전문가 초청 활 용, 미래 지향적 목적활용 기초연구사업 수행, 미래기술 동향예측 및 홍보 등을 통해 서 국내 도금기술의 기술자립 및 고도화를 위한 여건마련을 위하여 노력하고 있다.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.165-176
• /
• 2015

In this study, as recently there is active discussion in academia and relevant industries relating to delegation of social welfare facilities to the private sector, self-regulations relating to such delegation by Seoul was analyzed for systematic supply of social welfare service and find ways to improve self-regulations that will be enacted or amended by local governments. The data was collected from self-regulations of Seoul based on the self-regulation information system as of May 1, 2015, and analyzed according to the steps of delegation to the private sector proposed by Hyangsun Choi, in terms of presence of clauses and contents. Based on the analysis, the study prosed: first, clarity in description of application criteria and relevant facilities and dual system of the delegation agencies; second, improvement in criteria for selecting the delegation agencies and the head of committee; third, clauses related to supervision of an administrative agency; fourth, overall improvement of clauses related to evaluation nd review of delegation and institutional arrangement for more transparent evaluation.