• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.329-334
• /
• 1997

기포막 제한 및 기포 군집 이론에 의한 해석적 접근을 통해 축방향 출력분포가 임계열속에 미치는 영향을 파악하고, 이를 근거로 임계열속 발생지점에서의 엔탈피 변화를 고려하여 축방향 출력분포에 따른 임계열속 예측치 보정 모델을 개발하였다. 제안된 모델의 검증을 위해 cosine 형태의 축방향 출력분포를 갖는 임계열속 측정치와 비교하였으며, 그 결과 제안된 모델은 측정치에 대해 평균 1.0072, 표준편차 9.98%의 예측 성능을 나타냈다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1343-1349
• /
• 2011

In this study, the power enhancement potential of a Rankine power cycle by transcritical operation was investigated by comparing the power of an HFC-134a subcritical cycle with that of an HFC-125 transcritical cycle, for a low-grade heat source with a temperature of about $100^{\circ}C$. For a fair comparison using different working fluids, each cycle was optimized by three design parameters from the viewpoint of power. In contrast to conventional approaches, the working fluid's heat transfer and pressure drop characteristics were considered in the present approach, with the aim of ensuring a more realistic comparison. The results showed that the HFC-125 transcritical cycle yields 9.4% more power than does the HFC-134a subcritical cycle under the simulation conditions considered in the present study.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.119-125
• /
• 2010

The moving block bootstrap, the stationary bootstrap, and the threshold bootstrap are methods of simulation output analysis, which are applicable to autocorrelated data. These bootstrap methods assume the stationarity of data. However, bootstrap methods cannot work if the stationary assumption is not guaranteed because of seasonality or trends in data. In the simulation output analysis, threshold bootstrap method is the best in describing the autocorrelation structure of original data set. The threshold bootstrap makes the cycle based on threshold value. If we apply the bootstrap to seasonality data, we can get similar accuracy of the results. In this paper, we verify the possibility of applying the bootstrap to seasonal data.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.40-47
• /
• 2006

This paper proposes a multitoning method using threshold modulation of MJBNM(Modified Jointly Blue Noise Mask) for banding artifacts reduction. As banding artifacts in multitoning appear as uniform dot distributions around the intermediate output levels, such multitone output results in discontinuity and visually unpleasing patterns in smooth transition regions. Therefore, to reduce these banding artifacts, the proposed method rearranges the dot distribution by introducing pixels in the neighborhood of output levels that occurs banding artifacts. First of all principal cause of banding artifacts are analyzed using mathematical description. Based on this analytical result, a threshold modulation technique of MJBNM which takes account of chrominance error and correlation between channels is applied. The original threshold range of MJBNM is first scaled linearly sot that the minimum and maximum of the scaled range include two pixel more than adjacent two output levels that cover an input value. In an input value is inside the vicinity of any intermediate output levels produce banding artifacts, the output is set to one of neighboring output levels based on the pointwise comparison result according to threshold modulation parameter that determines the dot density and distribution. In this case, adjacent pixels are introduced at the position where the scaled threshold values are located between two output levels and the minimum and maximum threshold values. Otherwise, a conventional multitoning method is applied. As a result, the proposed method effectively decreased the appearance of banding artifacts around the intermediate output levels. To evaluate the quality of the multitone result, HVS-WRMSE according to gray level for gray ramp image and S-CIELAB color difference for color ramp image are compared with other methods.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.135-140
• /
• 1995

원자로를 임계에 도달시키기 위해서는 먼저 운전원이 예상임계 제어봉위치를 설정한 후, 예상 임계점을 계산하여, 원자로 냉각재 붕산농도를 조절하고 제어봉을 인출하여 원자로를 임계에 도달하도록 한다. 현재 원자력발전소에서는 이러한 기동과정에서의 예상임계점 계산은 수작업으로 하고있다. 본 논문은 고온대기에서 2% 출력까지 자동기동 시스템을 개발하기 위해 예상임계점 계산 전산화가 필요하므로 자동으로 예상임계점을 계산하는 프로그램을 개발하였다.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.411-414
• /
• 2002

The CHFG(Critical Heat Flux in Cap) test results have been evaluated to quantify the critical powers in hemispherical narrow gaps and Park's correlation has been verified. For verification of the Park's correlation, the critical powers in hemispherical narrow gaps have been measured using water at a pressure of 0.1-0.3 WPa for the hemispherical gap thickness of 1.0mm, and the heated top diameter of 238mm The measured critical powers were compared with Park's and Monde's correlation. As a results, the Park's correlation was most accurate of other correlations, however, estimated the critical powers somewhat larger than measured ones. So, it was suggested that the diameter factor in Park's correlation should be revised.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.11
• /
• pp.699-707
• /
• 2017

This study presents a comparative thermodynamic analysis of subcritical and transcritical organic Rankine cycles for the recovery of low-temperature heat sources considering nine substances as the working fluids. The effects of the turbine inlet pressure, source temperature, and working fluid on system performance were all investigated with respect to metrics such as the temperature distribution of the fluids and pinch point in the heat exchanger, mass flow rate, and net power production, as well as the thermal efficiency. Results show that as the turbine inlet pressure increases from the subcritical to the supercritical range, the mismatch between hot and cold streams in the heat exchanger decreases, and the net power production and thermal efficiency increase; however, the turbine size per unit power production decreases.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.175-180
• /
• 1998

중수로에 0.88 w/o 의 순환 핵연료를 사용하여 기존 중수로의 출력을 증강시키는 방안이 모색되었다. 기존 중수로와 양립하여야 하므로, 37봉 핵연료 다발과 CANFLEX 핵연료다발에 대한 격자 특성 계산과 노심 계산을 수행하였다. 열수력 여유도 증가와 고연소도 핵연료를 위하여 개발한 개량 핵연료 (CANFLEX)를 사용하면 원자로의 임계채널출력 (CCP)이 5 % 이상 증대하므로, 기존 원자로의 총 출력을 같은 열수력 한계 내에서 5 % 증가시킬 수 있다. 또한 개량 핵연료 다발에 순환우라늄을 사용하면 기존 월성 원자로의 구조 변화 없이 노심 출력분포의 재 분포에 의하여 15 % 까지 출력을 증강할 수 있다고 평가되었다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.121-124
• /
• 2000

적응 학습 알고리즘으로 가중치를 변화시키는 단층 신경망의 출력부에 Ramp 임계 함수를 적용하여 입력이 zero-mean Gaussian random vector인 경우 가중치의 stationary point를 구하고, 적응 학습 알고리즘을 유도한다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.675-680
• /
• 1997

반구형 간극에서 히터 출력이 임계열유속(CHF)에 이르렀을 때 히터표면의 온도 변화와 CHF 값을 측정하였다. 반구형 히터의 직경은 498mm 이고 간극은 1, 2mm 에서 실험을 수행하였다. 히터표면의 온도는 항상 간극상단의 특정 부분에서부터 증가하기 시작하였다. 즉, 이곳에서 국부적인 dryout이 발생한 것으로 판단된다. 히터의 열속이 증가함에 따라 dryout 부분은 원주방향과 아래방향으로 확장되었다. 한편 임계열유속보다 작은 열속에서는 dryout 영역이 변하지 않는 정상상태가 존재하였으나 임계열유속에서는 열속이 고정되어 있어도 dryout 영역이 스스로 확장되어 나갔다. 이 실험은 계속 진행중이며 현재까지 측정된 CHF 값을 제시하였다. CHF 값은 간극을 대상으로 개발된 기존의 실험식보다 낮게 측정되었다.