• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.457-458
• /
• 2012

본 논문에서는 저비트율 환경에서 화면내 예측 모드 정보를 적응적으로 부호화하는 방법을 제안한다. 저비트율 환경에서의 예측 모드의 확률정보에 기반하여 특성을 분석한 후 기존의 방법과 제안된 방법을 적응적으로 선택하여 예측 모드 정보를 부호화 한다. 제안된 방법에서는 기존의 MPM을 대체하여 하나의 MB내에서 MPM과 일치하지 않는 블록에 대한 개수에 대한 정보, 해당 블록의 위치 정보, 실제 모드 정보를 부호화하는 방법을 사용하였다. 실험 결과를 통해서, 제안된 기술은 저비트율 환경에서 평균적으로 0.10dB의 BD-PSNR 증가 또는 1.72%의 BD-bitrate를 감소시킴으로써 H264/AVC의 효율을 향상시킴을 확인할 수 있다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.729-734
• /
• 1995

원자력용 316L강에 질소를 첨가한 경우의 고온 인장성질을 조사하였다. 온도가 증가하면 인장강도는 감소하다가 온도범위가 30$0^{\circ}C$~50$0^{\circ}C$에서는 일정한 값을 나타낸 후 급격한 감소를 나타내었고 연신율은 감소하다가 40$0^{\circ}C$에서 최소값을 나타낸 후 다시 증가하는 경향을 나타내었다. 질소를 첨가하면 인장강도증가와 함께 연신율도 증가하였다. 동적변형시효 온도구간에서 변형속도변화에 따른 인장강도 및 연신율의 변화는 매우 작다. 동적변형시효를 위한 활성화에너지를 구해본 결과 동적변형시효를 일으키는 원소는 Cr이다. 질소를 첨가하면 동적변형시효가 발생되는 온도가 고온 쪽으로 이동되었는데 이것은 질소가 Cr과의 상호작용에 의해 Cr의 확산속도를 낮추기 때문이다. 가공경화지수는 동적변형시효와 회복의 영향으로 40$0^{\circ}C$에서 최대값을 나타내었으며 이 온도는 연신율이 최소값을 나타내는 온도와 인장강도가 일정하게되는 온도와 일치하므로 강도강화기구는 동적변형시효로 판명되었다.

• Feed Journal
• /
• v.2 no.6
• /
• pp.88-91
• /
• 2004

산란계에 있어서 최대 산란율을 나타내기 위한 아미노산의 요구량이 난중을 최대로 하는데 필요한 요구량과 반드시 일치하는 것은 아니다. 산란을 위한 일일 아미노산 요구량이 일단 충족되고 나면 그 요구량 이상의 아미노산을 섭취해도 산란수는 증가하지 않는다. (중략)

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.365-373
• /
• 2012

This study purposed to extract and assess the accuracy of assessment for deforestation area in Wonju city using medium resolution satellite image. The total size of deforestation area during the last nine years (2000-2008) was about 467 ha, and it was occurred annually about 52 ha. The most frequent form of deforestation was settlements (72%). Ninety percent of the size of deforestation was less than 2 ha in size. In addition, 79 percent of deforestation area was found within 500 m from the road network and within 100 m of the Forest/Non-forest boundary. This study compared the deforestation based on the administrative information (GIS deforestationI) with the deforestation (RS deforestation) extracted from the satellite imagery by vegetation indices (NDVI, NBR, NDWI). Extraction accuracy, mean-standard deviation${\times}1.5$ applied 3 by 3 filtering, showed reliable accuracy 35.47% k-value 0.20. However, error could be occurred because of the difference of land-use change and land-cover change. The actual rate of land-cover change deforestation area was 32% on administrative information. The 7.52% of forest management activities area was misjudged as deforestation by RS deforestation. Finally, the comparison of land-cover change deforestation (GIS deforestationII) with the RS deforestation accuracy, as a result NDVI mean-standard deviation${\times}2$ applied 3 by 3 filtering, showed improved accuracy 61.23%, k-value 0.23.

• Korean Journal of Culture and Social Issue
• /
• v.14 no.4
• /
• pp.1-18
• /
• 2008

The present study examined the accuracy of polygraph tests through two types of statistical methods with unknown ground truth. One method evaluated the accuracy based on the rates of agreements between polygraph test results of crime suspects and prosecutors' indictment decisions for them. Those crime suspects were tested with polygraph by the Prosecutors' Office of the Republic of Korea between 2000 and 2004. The other method estimated the accuracy by using the latent class analysis based on the frequency distributions of the polygraph results and indictments during 2006. Excluding cases that were 'inconclusive' on the polygraph test, the study showed that the accuracy of the polygraph tests is .914 (SE=.004) for the 2000-2004 data, and .885 (SE=.021) for the 2006 data. With the inclusion of 'inconclusive' cases in the 2006 data, the results from the latent class analysis showed the accuracy in the range between .707 and .734 (SE=.027~.031), with false positives between .078 and .087 (SE=.019~.023), and false negatives between .029 and .078 (SE=.010~.023). The probability that the polygraph test correctly classifies subjects appeared to be in the range between .912 and .925 (SE=.013-.016) for those who lie, and in the range between .867 to .955 (SE=.011-.040) for those who tell the truth.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.143-150
• /
• 2003

Based on the eigenfunction expansion method, the interaction between monochromatic waves and a partially immersed slotted plate with a back wall has been investigated. Analytical results show that the reflection coefficients by a partially immersed slotted plate depend on the porosity, immersed depth, chamber width, incidence angle and wave frequency. It is found that the reflection coefficient has minimum value within entire frequency range when the porosity has optimal value 0.1. Comparison between the analytical results and the experimental results(Zhu,2001) of reflection coefficients is made for various chamber widths, immersed depths and wave periods with good agreement. The present analytic method can account adequately for energy dissipation caused by flow separation behind a slotted plate and provide the design informations for the construction of slit caisson breakwater.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.52-59
• /
• 1998

We calculated the wave attenuation due to rain using the effective permittivity of the air with raindrops. The effective permittivity depends on the complex permittivity of rain drop and the fractional volume occupied by the raindrops. We calculate the complex permittivity of rain drop and the raindrops' volume using Marshall-Palmer Rain drop size distribution. The rain attenuation calculated by effective permittivity is compared with the results of ITU rain attenuation model, and the two rain attenuation models have a very close agreement. The effetive permittivity model underestimates the rain attenuation under 50 GHz, and overestimate at the frequencies under 50 GHz copmpared with the ITU model.

• Journal of Korea Water Resources Association
• /
• v.36 no.3 s.134
• /
• pp.447-454
• /
• 2003

The Bragg reflection of monochromatic waves propagating over a rectangular-typed impermeable submerged breakwaters is numerically investigated by using the finite element method. The reflection coefficients calculated from the present model are compared with those of laboratory measurements and the eigenfunction expansion method. A good agreement is observed. The finite element model is also applied to calculate reflection coefficients according to variations of length and width of submerged breakwater.

• Journal of KIISE:Software and Applications
• /
• v.27 no.4
• /
• pp.441-447
• /
• 2000

Automatic word spacing is needed to solve the automatic indexing problem of the non-spaced documents and the space-insertion problem of the character recognition system at the end of a line. We propose a word spacing algorithm that automatically finds out word spacing positions. It is based on the recognition of Eojeol components by using the sentence partition and bidirectional longest-match algorithm. The sentence partition utilizes an extraction of Eojeol-block where the Eojeol boundary is relatively clear, and a Korean morphological analyzer is applied bidirectionally to the recognition of Eojeol components. We tested the algorithm on two sentence groups of about 4,500 Eojeols. The space-level recall ratio was 97.3% and the Eojeol-level recall ratio was 93.2%.

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.142-149
• /
• 1995

본 연구에서는 새로운 장전자 방출법(DOFEC법)으로 W(210)면의 수소 흡착에 의한 일함수의 변화, heat of desorption에 대하여 연구하였다. 텅스텐(210)면에 수소가 흡착될 때 흡착율에 따라 일함수가 증가하다가 다시 감소하는데 이것은 수소가 처음에는(210)면의 step((100)면)에 흡착되고 dose를 증가시킴에 따라 terrace((110)면)에 흡착되기 때문임을 알았다. 즉, terrace보다 step의 sticking coefficient가 더 크며 zero coverage에서의 그 비는 2.57이며 이는 타 연구 결과와 잘 일치한다. (210)면의 step과 terrace의 수소 흡착에 대한 일함수의 정량적인 변화량 그리고 수소 dose량에 대한 각각의 면에 대한 상대적인 흡착율을 얻었으며, 이 결과는 독립된(110)면 또는 (100)면의 결과와 잘 일치됨을 알았다. 또한 이 결과는 흡착 실험에 있어서 dose량을 흡착률로 환산하는데 사용될 수 있다. 텅스텐(210)면에는 4개의 흡착 site가 존재하며 이 site들 중 $\beta$2과 $\beta$4 state는 second order 탈착 과정을 따르며 $\beta$1과 $\beta$3 state는 first order 탈착과정을 따른다. 따라서 텅스텐(210)면에는 수소가 해리적 흡착을 함과 동시에 비해리적 흡착도 함을 알았으며(210)면의 각 흡착 site를 이에 대응되는 (100)면과 (110)면의 흡착 site와 비교 검토하였다.