• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.6
• /
• pp.1507-1517
• /
• 2017

Generally, information breach incidents are thought to be caused by external hackers. However, both direct and indirect information breach incidents by insiders are more frequent than by external hackers. It also accounts for more than half of the total information breach, so it should be prepared against insider breach. In this study, based on General Deterrence Theory(GDT) and Rational Choice Theory(RCT), we integrated the risk sensitivity and situational anxiety, which were studied in the field of traffic psychology to construct research model. Result of analysis shows that the impact of risk perceptions on the severity and certainty of perceived punishment was not statistically significant, but perceived benefits, situational anxiety, and severity and certainty of perceived punishment were found to influence the information breach intention.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.65-72
• /
• 2001

Generally, it is said that control of the inertia system is to track the reference input quickly while suppressing the vibration due to the system itself. In this case, the difficulty fur designing a controller is caused by modeling uncertainty and parameter variation. The purpose of this paper is to propose a design method to suppress the vibration of three-mass inertia system based on the LMI theory. That is, the generalized plant model by which we can cope with conservativeness of the existing H$_{*}$ theory is proposed and analyzed in terms of LMI. The results of simulation fur the three-mass inertia system show that the proposed design approach is quite effective under the given situations.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.129-132
• /
• 2001

she purpose of this paper is to propose an approach to suppress the vibration of three-mass inertia system based on the LMI theory. and confirm its validity through simulations under the condition of parameter variation. First, the existing $H_{\infty}$ servo problem is modified to a structure to which the LMI theory can be applied by virtue of the interval model principle. By adopting this structure, we can divide given specifications fur the vibration suppression problem into $H_2$and $H_{\infty}$ performance criteria. The results of simulation for the three-mass inertia system show that the proposed design approach is quite effective.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.119-128
• /
• 2012

This study is to identify the factors that influence an intention to information security policy compliance of employees. To do this, this study is based on three theoretical backgrounds because of the lack of holistic perspective. Research results show that detection certainty and individual attachment have a positive effect on information security policy compliance intention. Detection certainty is influenced by security awareness education and training. Finally, response cost has a negative effect on information security policy compliance intention.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.2
• /
• pp.79-84
• /
• 1991

최근 전자산업의 급속한 발전으로 인하여 전기, 전자제품 특히 정보기기가 사회 각 분야에 보급됨에 따라 전자파 밀집도가 높아지고 전자파 환경을 악화시키는 경우가 증가하여 설치된 기기가 원래의 목표 대로 동작하지 않아 혼란을 일으키거나, 나아가 인체에 장해를 일으키는 등 심각한 문제 점으로 대두되고 있다. 이 문제점을 해결하기 위한 접근 방법은 일반적으로 두가지로 나눌 수 있는데 하나는 불요전자파의 방출을 규제치 이하로 억제하는 방법이고, 다른 하나는 일정한 규제치의 전자파 환경 내에서도 장해를 받지 않고 정상적인 동작을 할 수 있는 내성을 강화시키는 방법이다. 이 두가지 가 조화를 이루어 기기들이 공존할 수 있는 능력을 갖게 하는 것이 EMC 연구의 궁극적인 목표로 할 수 있다.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.2
• /
• pp.141-150
• /
• 1993

콘크리트내에 짧은 길이를 갖고 임의의 방향으로 배향된 강섬유는 콘크리트가 인장응력을 받을 때 일반콘크리트에 비하여 인장강도와 연성을 증가시키며 이는 콘크리트모체내 강섬유의 균열억제메카니즘에 기인한다. 본연구에서는 기존의 각기다른 spacing 개념들에 의하여 SFRC의 인장강도를 예측하고 정확한도를 실험치와 비교하여 평가하였는데 시험체의 경계조건 및 타설시의 진동으로 인한 콘크리트내 강섬유의 재향성을 고려한 단위면적당 섬유수(N1)개념이 실행결과와 가장 좋은 상관관계를 나타내었다. 또한 SFRC의 강도후 영역에 대한 이론적인 해석이 고려되었으며 본 해석은 시험체의 경계조건, 진동효과, 콘크리트모체와 강섬유의 강섬유의 접촉면의 비선형부착특성 고려 및 특히 위험단면에서 매입길이가 다른 각 강섬유의 적합조건을 고려하였다.

• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.83-90
• /
• 1999

제어이론분야에서의 발전은 그러한 이론을 다방면으로 응요할 수 있는 분야를 더더욱 폭넓게 제공해 주고 있다. 자동화와 관련된 분야뿐만 아니라, 건축 및 토목분야에서도 고도의 제어어이론을 응용한 예를 쉽게 접할 수 있게 되었으며, 지진동에 의한 구조물의 진동을 억제하려는 방책이 그 ??ㅣ다. 이에 관한 많은 연구에서도 알 수 있듯이, 일반적으로 구조물의 수학적 모델에만 의존하여, 즉 구조물의 설계파라미터는 이미 설계되어져 있다는 가정하에 제어계를 설계하고 있다. 그러나 이러한 설계법에 있어서는 설계자로 하여금 구조물의 설계파라미터를 조정할 수 있는 자유도는 전혀 주어지지 않게 되며 단지 제어계의 파라미터를 조정하는 자유도만 허용된다. 이러한 문제점을 극복하기 위해 구조계 및 제어기의 설계파라미터를 동시에 조절할 수 있는 자유도가 허용되는 '구조계/제어계의 동시 최적화' 기법이 있다. 따라서 본 논문에서는 교량의 주탑 및 해양구조물 등의 진동제어 문제에 이러한 설계기법을 이용하여 주어진 설계사양을 만족하도록 구조계 및 제어계의 파라미터를 최적화 한다. 특히 본 논문에서는 제어계 설계 문제에 있어서의 일반적인 경우를 고려하여 상태의 일부가 관측된다고 가정하고 출력피드백의 경우에 대해 고찰하고 있다. 이때의 설계사양은 선형행렬부등식(LMI)으로 주어지며, 실험을 통하여 본 논문에서 소개하는 설계기법의 유효성을 검증한다.

• Geotechnical Engineering
• /
• v.10 no.3
• /
• pp.119-134
• /
• 1994

In order to assess the possibility of using steel fibers in the fissured ciays, uniaxial compression tests were performed on both unreinforced and reinforced clay samples containing a pre-existing crack. Test results showed that the steel fiber reinforcement increased resistance to cracks initiation and their propagation, and therefore increased both stress at crack growth initiation and peak stress at failure. The increase in resistance to cracks initiation and their propagation was related to the arresting or deflecting the crack propagation in clay samples by steel fibers. A theoretical interpretation of experimental results was made using fracture mechanics theory and pull-out mechanisms in fiber reinforced materials. It was revealed that the steel fibers had bridging effect through their pull-out action that caused an increased resistance to the propagation of the cracks in the samples. The predicted pull-out force based on theoretical analyses agreed reasonably well with the measured values obtained from pull-out tests.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1528-1533
• /
• 2012

This study examined the protective effects of ginger and processed (Beopje) ginger extracts on gastritis induced by HCl-ethanol in SD-rats. Beopje (or Poje) is a branch of herbal medicines processed using a Korean traditional method to achieve specific pharmacological effects. Gastric lesions were induced in the rats by a treatment of 1 mL of HCl-ethanol (60% ethanol＋150 mM HCl). The rats were divided into seven groups: Normal (1 mL of saline without HCl-ethanol treated group), Control (HCl-ethanol treated group), GL (35 mg/kg of ginger treated group), BGL (35 mg/kg of Beopje ginger treated group), GH (350 mg/kg of ginger treated group), BGH (350 mg/kg of Beopje ginger treated group) and Cimetidine (80 mg/kg of cimetidine treated group). The gastric injury inhibition rate was 40.2% and 64.9% in GL and BGL and 68.4% and 99.6% in GH and BGH respectively, showing significantly lower rates than the control (p<0.05). The level of gastric juice secretion decreased significantly in all ginger administered groups. The pH of the gastric juices of BGH increased and the acidity of BGH and cimetidine decreased significantly (p<0.05) compared to the other groups. Beopje ginger had stronger inhibitory effects on gastritis than ginger without the Beopje process. The protective effect on gastritis by the ginger and Beopje ginger extracts increased in a dose-dependent manner (p<0.05). These results suggest that ginger has inhibitory effects on HCl-ethanol induced gastritis in rats that can be improved through the Beopje process.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.111-117
• /
• 2008

Generally, speed control for Induction motor widely used in industrial field is accomplished by commercial inverter. Induction motor driven by commercial inverter causes the micro surge voltage because of high speed switching of inverter. Micro surge brings about not only the breakdown of motor but also noise in PLC control system. And they court the enormous interference in activity for production. In this paper, we suggest the suppressible countermeasure for the breakdown of motor after the consideration of productive mechanism about micro surge. Experiment is performed by inverter with LCR filler in its output terminal. As a result, we confirmed that micro surge voltage is reduced. And the suppressible countermeasure for the noise of PLC control system is suggested by theoretical consideration.