• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.180-181
• /
• 2000

일반적으로 광통신이나 고출력 레이저에 사용되는 광학 소자들 중 고반사율의 거울은 특정 파장과 특정 각도에 대해서만 민감하도록 설계되어 있다. 이것을 여러 파장의 빛을 여러 각도로 입사시키더라도 높은 반사율을 얻는다면, 소자의 효율을 향상시키는데 상당한 효과를 볼 수 있다. 은이나 알루미늄의 금속박막으로 제작되는 금속 거울은 제작하기 쉽고 입사파장과 금속의 재질에 관련되어 90 %이상의 반사율을 갖지만, 특정한 각도에서는 빛이 금속 내에 있는 자유 전자들에 의해 상당량 흡수되어 버린다. 따라서 금속 거울은 에너지의 손실이 적어야 하는 광통신이나 고출력 레이저와 같은 응용분야에는 사용될 수 없다. 이러한 흡수가 거의 없는 유전체 거울은 고굴절률과 저굴절률의 층이 λ$_{0}$/4의 광학 두께를 가지고 주기적으로 반복되는 구조를 갖는다. 이러한 λ$_{0}$/4 유전체 다층 박막계는 1-차원 photonic 결정 구조와 동일하게 다룰 수 있는데, 1-차원 photonic 결정 구조가 모든 입사각도에 대해서 전방향 반사를 보인다는 것을 이론과 실험적으로 증명하였다[1-3]. (중략)

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.34.2-34.2
• /
• 2010

건물이 초고층화됨에 따라 고강도 콘크리트를 구조물에 적용하고 있으며 내화 시 폭열 예방을 위해서 고강도 콘크리트에 섬유를 첨가하는 경우도 있다. 초고층 구조물 합성부재에서 강재보와 콘크리트 슬래브의 합성작용을 위해서는 전단스터드를 필요로 하게 된다. 오늘날 제시된 전단스터드 설계식은 일반강도 콘크리트 실험에 의해 제시되었고 전단스터드는 항복강도에만 제한되는 것으로 나타났다. 따라서 본 논문은 초고층 건물에 적합한 고강도콘크리트를 기존 제안식으로 비교 분석하고 새로운 설계식의 필요성을 확인하며 ANSYS 모델링을 통한 전단스터드의 거동을 분석하는데 그 목적이 있다.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.83.1-83.1
• /
• 2010

본 연구는 고강도 강재를 적용한 연속교 형식의 강교량에 대하여 연구를 수행하였다. 교량에 사용되는 주구조의 고강도화에 따로 연속교의 교각 부근 부모멘트부에는 정모멘트부에 비하여 큰 모멘트가 작용하게 된다. 또한 정모멘트 구간과 달리 상부플랜지에 인장력이 작용하게 되어 완공 후에도 극한 하중 상태에서 콘크리트 데크가 응력을 부담할 수 없게 된다. 이에 따라 하부 플랜지에 불안정 파괴가 발생할 가능성이 있으며 비합성 단면과 같은 방법으로 설계하게 된다. 또한 모멘트 재분배를 고려한 설계를 하기 위해서는 부모멘트부에 충분한 휨 연성이 필요하다. 고강도 강재를 적용한 교량은 일반강재를 적용한 교량에 비하여 휨연성이 감소하게 되므로 휨연성 확보를 위한 보강방안이 필요하다. 본 연구는 부모멘트부의 휨연성 향상을 휘하여 가로보의 부등 배치를 제안하였으며, 유한요소해석 결과 휨연성이 향상되었다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.3-3
• /
• 2011

아라미드 섬유는 고강도, 고탄성을 나타내고, 고내열성, 치수 안정성, 내약품성, 전기 절연성 등이 뛰어나다. 아라미드 섬유는 일반 섬유보다 강한 물성을 지닌 슈퍼섬유소재의 하나로 지난 수십년 간 내열성 또는 고강도 섬유로 많은 연구 및 개발이 이루어져 왔으며, 보호복이나 군용, 특수의류 분야에 많은 용도 전개가 가능하나 유리전이온도 및 결정화도가 상대적으로 높아서 난염성 섬유소재로 염색 메카니즘의 명확한 규명이 없다. 따라서 본 연구에서는 난염성인 아라미드 섬유(m-Aramid, p-Aramid)의 염색방법에 대한 연구로 표면개질을 통한 염색성, 팽윤제 종류 및 농도, 염색온도 조건, 중성염 효과 등 염색조건에 따른 염색특성을 알아보았으며, 또한 다양한 염료의 적용을 통하여 침염뿐만 아니라, 날염 가능성에 대해 연구를 진행하였다.

• Journal of The Korean Association For Science Education
• /
• v.40 no.3
• /
• pp.337-346
• /
• 2020

In this study, we investigated the characteristics of students participating in Science Core high schools classes and their relevance to Positive Experiences on Science (hereinafter, PES), and factors causing PES, presented by the students of Science Core high schools. A total of 20 students and five teachers in four regions across the country participated in the in-depth interview, which were conducted with the focus group of students first, and then in-depth interviews with teachers. Based on the interview results, we explored teaching and learning experiences helpful to the PES, assessment experiences resulting in the PES, and ways to support Science Core high schools to enhance their PES. Students and teachers of Science Core high schools argued that students' participation will increase only if they engage in classes while drawing attention within the range that students can understand, students' PES such as scientific interest can be improved through experiments in which students choose topics or design their own exploration process, science competencies such as science problem solving ability and scientific thinking ability should be developed through exploratory experiment activities that fit the nature of science, etc. In addition, regarding ways to improve and support Science Core high schools to enhance PES, securing science class hours, restructuring the contents of science elective courses, and necessity of maintaining Science Core high schools are suggested. Based on the research results of science high school students' PES, ways to improve the PES of general high school students are discussed.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.377-383
• /
• 2007

In recent years the field application of high performance concrete has been increased to improve the quality and reliability of concrete structures. The mix design of the high performance concrete includes the 2 set-off mixture theory of mortar and coarse aggregate and that of paste and aggregate. The 2 set-off mixture theory of mortar and coarse aggregate has a problem of having to determine its value through repeated experiments in applying the rheological characteristics of mortar. The 2 set-off mixture theory of paste and aggregate has never been applied to high performance concrete since it doesn't take into account the relationship between optimum fine aggregate ratio and unit volume of powder nor does it consider the critical aggregate volume ratio. As the mixture theory of these high performance concretes, unlike that of general concrete, focuses on flowability and charge-ability, it does not consider intensity features in mix design also, the unit quantity of the materials used is determined by trial and error method in the same way as general concrete. This study is designed to reduce the frequency of trial and error by accurately calculating the optimum fine aggregate ratio, which makes it possible to minimize the aperture of aggregate in use by introducing the maximum density theory to the mix design of high performance concrete. Also, it is intended to propose a simple and reasonable mix design for high performance concrete meeting the requirements for both intensity and flowability. The mix design proposed in this study may reduce trial and error and conveniently produce high performance concrete which has self-chargeability by using more than the minimum unit volume of powder and optimum fine aggregate with minimum porosity.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.3
• /
• pp.5-16
• /
• 2021

In this study, the applicability of the MBR(Membrane Bio Reactor) process of oxygen dissolve was evaluated through comparison and evaluation of the efficiency of oxygen dissolve device and conventional aeration device in the explosive tank within the MBR process. The organic matter and ammonia oxidation by oxygen dissolve device were evaluated, and the efficiency of persaturation was evaluated by applying real waste water (anaerobic digester effluent treatement from food waste). SCOD and ammonia removal rates for oxygen dissolve device and conventional aeration device methods were similar. However, it was determined that the excess sludge treatment cost could be reduced as the yield of microorganisms by oxygen dissolve device is about 0.03 g MLSS-produced/g SCOD-removed lower than that of microorganisms by conventional aeration device. The removal rates of high concentrations of organic matter (4,000 mg/L) and ammonia (1,400 mg/L) in anaerobic digester effluent treatment from food waste were compared to the conventional aeration device and the oxygen dissolve device organic matter removal rate was approximately 13% higher than that of the conventional aeration device. In addition, for MLSS, the conventional aeration device was 0.3 times higher than for oxygen dissolve device. This is believed to be due to the high progress of sludge autooxidation because the dissolved oxygen is sufficiently maintained and supplied in the explosive tank for oxygen dissolve device. Therefore, it was determined that the use of oxygen dissolve device will be more economical than conventional aeration device as a way to treat wastewater containing high concentrations of organic matter.

• International Area Studies Review
• /
• v.21 no.2
• /
• pp.171-196
• /
• 2017

This study employed the Analytical Hierarchy Process (AHP) methodology with the enhancement of the competitiveness of Vietnamese commercial banks set as the overall goal of the model. Analysis of the survey questionnaire based on pair-wise comparisons and collected from experts in the field of banking led to three significant findings. First, banking safety is the most important evaluation criteria for the competitiveness of local commercial banks in Vietnam, followed by operating efficiency, intangible values and large scale. Second, in order to achieve the overall goal of enhancing competitiveness for local banks, securing healthy financial conditions should be made the priority. Effective management systems, strategic human resource planning and high-quality products and services all show strong connections to achieving the evaluation criteria. Third, the study found that bad debt settlement is essential in obtaining healthy financial conditions. In order to introduce effective management systems as well as high-quality products and services, technological advances are very important. Improving the quality of executives and staff is imperative for strategic human resource planning purposes.

• Journal of Industrial Convergence
• /
• v.20 no.2
• /
• pp.21-27
• /
• 2022

Purpose: The purpose of this study is to investigate the structural relationship between self-directed learning, online class environment, and learning satisfaction of general high school students. 219 12th grade students in Sejong B High School responded to the survey questionnaire. For data analysis, correlation analysis and structural equation models were implemented. Results are as follows. First, there was a moderate or higher correlation between self-directed learning, online class environment, and learning satisfaction. Second, the model fit of the structural model among variables was good. Self-directed learning had an effect on the online class environment, and the online class environment had a positive effect on learning satisfaction. However, self-directed learning had no statistically significant effect on learning satisfaction. The researcher found the implication that learners' online class satisfaction showed a synergistic effect when students' self-directed learning ability and educators' excellent class environment are created. Also, the researcher proposed to analyze online learning satisfaction by comprehensively considering the individual, family, and school factors of various learners.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.161-164
• /
• 2004

본 연구에서는 고휘도 백라이트에 있어서 일반적으로 휘도 향상을 위해서 사용하는 프리즘 혹은 편광프리즘 등의 고가의 기능성 광학시트를 사용하지 않고, 확산시트만을 사용하여 고성능의 BLU 를 제조할 수 있는 핵심부품으로서 프리즘 도광판에 대해서 연구하였다. 고휘도 프리즘 도광판을 구현하는 방법으로 먼저, 광학적으로 시뮬레이션을 통해서 가능성을 검증하고, 기본적인 광학구조의 설계를 수행한 후, 이를 stamper 방식의 사출성형으로 실물을 구현하여 설계의 재현성을 확인하는데 역정을 두었다. 실험결과, 17 inch, 두께 8 mm 사양의 모니터용 도광판에 있어서, 고휘도 BLU를 구현하기 위해서 도광판 밑면과 윗면에 프리즘 구조를 부가한 도광판의 경우에 기존의 인쇄형 도광판보다 약 20%의 휘도향상 효과를 확인할 수 있었으며, 향후 확산시트만을 사용한 고휘도 백라이트로의 응용가능성을 검증할 수 있었다.