• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.173-180
• /
• 2019

There is a case where the output of renewable energy(RE) is curtailed due to an increase in the share of RE. Typically, wind power(WP) is curtailed due to oversupply and low load at midnight. However there is a case where the output of WP is limited during daytime due to the increase in share of photovoltaic(PV). In current electricity market, as the share of PV is increased, the curtailments of WP will be increased further, which will add to the difficulties of wind farm operators. In this paper, we propose a method to distribute the power limit of RE according to the criterion based on the priority constraint of the energy source which is difficult to operate the power system.

• The Journal of the Korea Contents Association
• /
• v.6 no.7
• /
• pp.69-78
• /
• 2006

In this paper, we presents the efficiency and a transmission quality of the system which is composed of the optical elements from physical layer of the active optical ring network. For a simulation it will use the Transmissionmaker WDM and it will be able to observation a optical transmission quality of the optical transmission system. The active optical network is composed of two rings(main ring and sub-ring). It measures the BER(Bit Error Rate) quality which it follows node number from the sub ring and physical distance of the node. Performance analysis from the physical layer becomes the standard of the plan for the efficiency optimization of the active optical ring network. Consequently it will be able to compose the efficient optical transmission system which reflects the physical distance, a traffic demand quantity of each node and a number of users from actual network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3427-3433
• /
• 2009

This paper attempted to suggest the standards of light transmittance based on the analysis of the changes in contrast sensitivity of photopic condition according to the light transmittance of tinted lenses. The subjects of the experiment were 24 male and 13 female adults with normal ocular functions. They were asked to wear four tinted lenses (gray, brown, red, and green) in turn. The light transmittance of the lenses were 80~90%, 60~80%, 43~60%, and 30~43%, respectively. Contrast sensitivities were measured by using F.A.C.T. chart. The results showed that contrast sensitivities were decreased in proportion to the decrease of the light transmittance, and visual sensitivity of brown lenses were the highest and that of red lenses were the lowest. The results of the experiments suggested that the light transmittance should be over 38% for brown, gray and green lenses, and over 52% for red lenses. Accordingly the appropriate light transmittance should be considered when tinted lenses are selected for the purpose of eye protection in everyday life.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.181-186
• /
• 2019

The floating photovoltaic system is a new concept in the renewable energy technology. That is similar to land based photovoltaic technology except floating system. So the system needs buoyant objects, mooring, ect, besides modules and supports, and that is able to withstand in water level changes and wind strength. Therefore the floating photovoltaic system is much different from land photovoltaic system. Unlike land-based photovoltaics developed on the rooftop and in the mountains of buildings, The floating photovoltaic power generation is a new concept in power generation technology in which photovoltaic modules are installed using buoyancy on the surfaces of dams and reservoirs. It is abundant enough to construct a power plant with a power generation potential of about 5% and a power generation capacity of 4,170MW, so that the land can be efficiently used without destroying the environment. In this paper, the technical standard for evaluating safety in addition to the water-state photovoltaic power generation system is not established yet, and the items to be considered for standardization of the water-state photovoltaic power generation system are summarized in this paper.

• Journal of Industrial Convergence
• /
• v.22 no.2
• /
• pp.55-62
• /
• 2024

Visible light communication, which transmits information using visible light, has advantages such as ultra-high speed, ultra-delay, and ultra-connectivity, so research is being conducted as a way to complement 6G communication. In this paper, a study was conducted to overcome the performance degradation caused by the RGB mixing ratio in visible light communication. In a visible light communication system using LED lighting, the role of lighting is an important function, and when used for communication, the performance difference according to the RGB mixing ratio inevitably occurs. In particular, if the intensity of light is below a certain standard, the problem of deteriorating the performance of the entire system occurs. In this study, when a certain performance or less occurs in the communication system caused by the difference in the mixing ratio among the three RGB channels, the remaining two signals except the LED with the best performance are transmitted to STBC (Space-Time Block Coding) to ensure the quality of communication. A computer simulation was performed to verify the performance of the proposed system, and it can be seen that the performance of the proposed system is improved compared to the existing system.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.356-363
• /
• 1994

By Gaussian optics, a zoom eyepiece is analyzed, which has the diameter of exit pupil 0.5 em, eyerelief 1 em, and angular magnification $M_a=7~15$. The initial design is based on this analysis. Telescope objective which was previously designed has focal length($(f_u')$ 21.0 em, and its clear aperture is 6.2 em. Zoom telescope has half field angle $\beta=1.5^{\circ}$ at the entrance pupil and at exit pupil it is $\beta'=1.5^{\circ}\times(7~15)=10.5^{\circ}~22.5^{\circ}$. Zoom eyepiece consists of three groups, of which each one satisfies the Seidel 3,d order aplanatization. Final design is obtained by optimization for the finite ray aberration, and the zoom eyepiece is assessed on the basis of the resolution of eyes.f eyes.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.3 s.52
• /
• pp.245-251
• /
• 2005

Safety is one of the key issue in the regulation of cosmetics. Cosmetic Act deals with it in Korea. The guidance for the testing cosmetic ingredients and their safety evaluation are prepared by Korea Food and Drug Administration. Ultraviolet radiation could Induce skin damage, edema, erythema, photoaging, immune dysfunction and skin cancer. Ultraviolet radiation is classified as Group 2A(probably carcinogenic to humans) by International Agenry for Reaserch on Cancer(IARC). The in vitro methodologies for evaluating the toxic potential of ingredients reported in the literature have not yet been sufficiently validated for use in areas other than the study for mutagenicity/genotoxicity, for pre-screening for severe irritancy, for screening of phototoxicity and for evaluating the percutaneous absorption. The 3T3 neutral red uptake photoxicity test (3T3 NRU PT) was accepted as OECD toxicity guideline in 2002. The 3T3 NRU PT is an in vitro method based on a comparison of the cytotoxicitv of a chemical when tested in the presence and in the absence of exposure to a non-cytotoxic dose of UVA/visible light.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.587-594
• /
• 2016

This study aims to analyze the benefit-cost of the cleaning device for photovoltaic power generation systems in buildings in order to check its economic feasibility. A product, which has similar characteristics to the ultrasound-based cleaning device and is widely used in South Korea, was selected to compare with the benefit-cost value of the ultrasound-based cleaning device in this study. In order to quantitatively and qualitatively analyze benefit and cost aspects of the two products, categories and evaluation factors of each aspect as well as evaluation criteria were identified. Based on the identified evaluation factors and criteria, this study conducted face-to-face interviews with 15 experts to measure weights of benefit and cost aspects of the products. As the results, the total benefit weight of the ultrasound-based cleaning device was larger than its total cost weight since the benefit-cost value was greater than 1, which was 1.6 times of that of to compared product. Therefore, from the economic perspective, it is worth to develop the cleaning device for photovoltaic power generation systems applying ultrasound technology.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.297-304
• /
• 2013

Purpose: To investigate blue light rejection and the percentage of blue light in the visible light of blue light blocking lens according to light source, and to study prescriptions for blue light blocking lens Methods: UV-VIS spectrophotometer was used for blue light rejection and the percentage of blue light in the visible light according to light source, and the percentage of blue light in solar light was used to evaluate the prescription for blue light blocking lens. Results: The blue light rejection and the percentage of blue light in the visible light of each lens were depending on light sources. Through the way to compare the percentages of blue light in the visible light passing through the lens with that in solar light, blue light blocking lenses suitable to each light source could been selected. Conclusions: In the prescription for blue light blocking lens, inquiry for user's display must be preceded. And then the percentages of blue light in the visible light passing through the lens based on that in solar light may be useful as a method of evaluating the prescription for blue light blocking lens.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.1
• /
• pp.79-90
• /
• 2007

The AmonRa instrument, the primary payload of the international EARTHSHINE mission, is designed for measurement of deep space albedo from L1 halo orbit. We report the optical design, tolerance analysis and the optical performance of the breadborad AmonRa imaging channel instrument optimized for the mission science requirements. In particular, an advanced wavefront feedback process control technique was used for the instrumentation process including part fabrication, system alignment and integration. The measured performances for the complete breadboard system are the RMS 0.091 wave(test wavelength: 632.8 nm) in wavefront error, the ensquared energy of 61.7%($in\;14\;{\mu}m$) and the MTF of 35.3%(Nyquist frequency: $35.7\;mm^{-1}$) at the center field. These resulting optical system performances prove that the breadboard AmonRa instrument, as built, satisfies the science requirements of the EARTHSHINE mission.