• Journal of Sensor Science and Technology
• /
• v.6 no.2
• /
• pp.155-162
• /
• 1997

Zinc oxide(ZnO) thin films were deposited on r-plane sapphires from a solution containing zinc acetate. The films were obtained in a hot wall reactor by the pyrolysis of an aerosol produced by an ultrasonic generator. The crystallinity, surface morphology and composition of the films have been studied using the x-ray diffraction method(XRD) scanning electron microscopy(SEM) and Auger electron spectroscopy (AES) respectively. The influences of the substrate temperature on the crystallinity of the films were studied. Strongly (110) oriented ZnO films were obtained at a substrate temperature of $350^{\circ}C$. The resistivity was increased to above $3{\times}10^{6}{\Omega}{\cdot}cm$ with copper doping and vapor oxidation.

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.78-83
• /
• 2000

Generally, There is to install fire resist shutter or to compart between the office room and the atrium in the atrium buildings in Korea. But, Glass wall that is installed sprinkler which purpose to protect it from fire, is already installed between the office room and the atrium in the advanced nations. We study this problem as follow; We made the fire scenario, and analyze each scenario using FASTLite is fire modeling software and BREAK1 is to predict the window breakage time in the compartment fire. In this study, we can decide that fire compartmentalization between atrium and office rooms doesn't require in Atrium building if the material and fire protection system were reliable. Consequently, Korean Fire Protection Regulations have to consider in direction of increasing freedom of building.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2003

The experimental FT-IR spectra and DTA curves of the $PbO-Bi_2O_3-B_2O_3-SiO_2$ glasses have been investigated. The composition ratio dependence of glass transition temperature showed that the structure of this glass system changes at 60 mol% $Bi_2O_3$. We have observed that the FT-IR spectra of the investigated samples with high bismuth content are dominated by bands associated to the structural units of the heaviest cation, $Bi^{3+}$ and the boron atoms in the treated samples are three and four coordinated even for very high $Bi_2O_3$ content. The low intensity of these non-bridging oxygen bands, for high PbO content glasses, can be attributed to the strong network-forming roles of PbO. The glasses absorption bands exhibited a greater change in intensities on crystallization.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.4
• /
• pp.416-421
• /
• 2006

Among the oriental medicine compounds, sulfur is known as a heat-generation material in a human body. Heat-generation reaction results in the consumption of energy source. Some oriental herbs are used to treat obesity and blood lipid composition. Therefore, we hypothesized that a sulfur containing oriental medicine compound, called as Hangbisan, could help weight loss of experimental rats. This study was designed to observe the change of weight of Sprague-Dawley (SD) rats that had been fed with high-fat diet containing 10% cellulose or Hangbisan for 9 weeks. Hangbisan affected the weight loss of rats as reducing the level of plasma cholesterol and triglyceride and increasing the level of HDL-cholesterol. Thus, this study revealed Hangbisan have an anti-obesity effect and a potential role for anti-obesity agent in the application of oriental medicine compounds.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.107-107
• /
• 2017

전자제품의 성능이 향상됨에 따라서 전자제품에 사용되는 부품의 고집적화가 필연적으로 요구되고 있으며, 고집적화 된 전자제품의 방열(heat dissipation)에 관한 문제점이 대두되고 있다. 방열은 전자기기의 성능과 수명을 유지하는데 있어서 중요한 문제 중 하나로서 방열 효과를 높이기 위해 다양한 연구 개발이 진행 중이다. 방열에 사용되는 소재로는 Cu가 있으며, 저렴한 가격과 상대적으로 높은 방열 효율을 가지는 장점이 있다. Cu는 전기 도금 증착 방법을 사용하여왔으나, 전기도금 방식으로 증착된 Cu 방열판은 제품에 열이 축적될 경우 Cu와 substrate 사이의 residual stress로 인해 박리나 뒤틀림 현상 등이 발생하여 high power를 사용하는 device의 방열 소재로 사용하기에는 개선해야 할 문제점이 있다. 이러한 문제점을 극복하기 위한 방법으로 magnetron sputter 증착 방법이 있으며, magnetron sputter은 대면적화가 용이하고, 다양한 물질의 증착이 가능한 장점으로 인해 hard coating 또는 thin film 증착과 같은 공정에 사용되고 있다. 특히 증착된 film의 특성을 조절하기 위해서 magnetron sputter에 pulse 또는 ICP (inductively coupled plasma) assisted 등을 적용하여 plasma 특성을 조절하는 방법 등에 관한 연구가 보고되고 있다. 본 연구에서는 pulsed magnetron sputtering 방식을 이용하여 증착된 Cu film 특성 변화를 확인하였다. 다양한 pulsing frequency와 pulsing duty ratio 조건에서, Si substrate 위에 증착된 Cu film과의 residual stress 변화를 측정하였다. Pulse duty ratio가 90% 에서 60%로 감소함에 따라서 Cu film의 residual stress가 감소하였고, pulsing frequency가 증가함에 따라 Cu film의 residual stress가 감소하는 것을 확인하였다. 증착 조건에 따른 plasma의 특성 분석을 위하여 oscilloscope를 이용하여 voltage와 current를 측정하였고, Plasma Sampling Mass spectrometer 를 이용하여 ion energy의 변화를 측정하였다. 이를 통해 plasma 특성 변화가 증착된 Cu film에 미치는 영향과 residual stress의 변화에 대한 연관성에 대하여 확인할 수 있었다.

• Pediatric Infection and Vaccine
• /
• v.11 no.1
• /
• pp.131-135
• /
• 2004

Tuberculous peritonitis is a rare cause of intra-abdominal infection. Although sometimes asymptomatic, most of the patients have fever, weight loss, abdominal pain, and edema. The diagnosis of tuberculous peritonitis is difficult and sometimes delayed because of confusion of the disease with other illnesses and the non-specificity of signs and symptoms. Tuberculous peritonitis is examined with ultrasonography and computerized tomogram, but confirmed by biopsy or tuberculosis culture. Ascitic fluid is exudates with a lot of lymphocytes and elevated protein. Tuberculous peritonitis is treated successfully with isoniazid, rifampicin for one year, pyrazinamide for first 2 months and streptomycin for first one month. We experienced one case of tuberculous peritonitis with transudate of ascitic fluid, confirmed by biopsy using colonoscopy, and treated successfully.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4A
• /
• pp.364-370
• /
• 2002

In this paper, we propose a VLSI array architecture for high speed processing of FBMA. First of all, the sequential FBMA is transformed into a single assignment code by using the index space expansion, and then the dependance graph is obtained from it. The two dimensional VLSI array is derived by projecting the dependance graph along the optimal direction. Since the candidate blocks in the search range are overlapped with columns as well as rows, the processing elements of the VLSI array are designed to reuse the overlapped data. As the results, the number of data inputs is reduced so that the processing performance is improved. The proposed VLSI array has (N$^2$+1)${\times}$(2p+1) processing elements and (N+2p) input ports where N is the block size and p is the maximum search range. The computation time of the rat reference block is (N$^2$+2(p+1)N+6p), and the block pipeline period is (3N+4p-1).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.516-520
• /
• 2004

Stream Naturalness means the index of natural state in stream's ecosystem. The evaluation of stream naturalness can evaluate relatively the effect of environmental damages by human and to show how significantly current stream has been apart from its natural state. And it could be show what is the meaning of importance in stream's ecosystem by such distinctions and it Is done by showing the need how a large scale of action for restoration to be restored to natural state of stream system. In this study, a set of index for Stream Naturalness evaluation is proposed, which is referred to and modified problems with domestic and foreign study cases. This methodology is supposed to show well the characteristics of stream in Korea. A case study of Hong-Chun River shows how this methodology is applied to the Stream Naturalness evaluation. For improving the function of river which are water use and flood control and for preserving the function of inhabitation, the proposed methodology is expected to be used a index of direction for a environmental project related stream improvement by evaluation of ecologically sound function in streams.

• Membrane Journal
• /
• v.16 no.3
• /
• pp.230-234
• /
• 2006

This study discusses an esterification of trifluoroethanol (TFEA) with methacrylic acid (MA) using acid-resistant PVA pervaporation membrane. The acid-resistant PVA membranes, which were prepared via a thermal cross-linking reaction of PVA and EGDE were adopted in the esterification reaction. The effect of reaction conditions such as temperature, acid catalyst content, and initial molar ratio of TFEA/MA was investigated on the conversion of trifluoroethyl-methacrylate (TFEMA). It was found that TFEMA conversion increased with increasing the reaction temperature, the catalyst content, and the initial molar ratio. The economical conversion of TFEMA more than about 90% was obtained at the following reaction conditions: reaction temperature of $90^{\circ}C$, 2.5 wt% of catalyst and initial molar ratio of 1.7.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.94-94
• /
• 2011

본 논문은 "차세대 반도체용 진공공정의 실시간 측정/진단/제어 기술개발"과제의 제 3 세부과제 "스마트형 진공 배기 진단 제어 시스템 개발"의 주요 연구 실적을 소개한다. 본 세부과제는 (1)진공펌프 및 배기 시스템의 다중 상태변수 측정 장치 개발, (2)공정별 펌프 상태 및 공정 조건 data base 구축 및 진단 알고리즘 개발(e-Diagnostics Level 2 FDC 수준), (3)공정별 펌프 상태 변수 측정을 통한 자기 진단 기술 개발(e-Diagnostics Level 2 FDC 수준), 그리고 (4)측정/통신 PMS (Pump Monitoring System) 개발(통신속도 56k bps 이상, e-Diagnostics Level 0~1)을 최종 목표로 추진되어 왔다. 첫 번째 주요실적은 진공배기시스템의 다중 상태변수 측정 및 평가 장치를 성공적으로 개발하였다. 본 장치는 현장에서 진공펌프의 배기속도를 3% 이내로 정밀하게 측정할 수 있는 소닉 노즐을 이용한 배기속도 측정 장치 및 기술을 성공적으로 개발 완료하였다. 그리고 측정 가능한 상태변수는 20종에 달하며 이들을 이용하여 진공펌프의 성능인자 15종과 특성치 9종을 종합적으로 평가할 수 있는 능력을 갖추었다. 두 번째 주요실적은 공정별 진공배기시스템의 자기진단 및 예지보수 기수 개발이다. 연구에서 개발된 적응형 인자모델을 이용한 상태진단 기술은 이미 학회 논문으로 소개되었으며 본 기법은 기존의 시계열 상태변수를 이용한 기존의 상태진단 기법보다 메모리 소요량을 100배로 줄였으며 그리고 연산양은 10% 이하로 줄인 획기적인 기법이라 할 수 있다. 세 번째 주요실적은 상태변수 측정, 통신, 제어 및 공정적응 기능 통합형(smart) PMS(pumper monitoring system) 개발이다. 본 장치는 CAN통신 기법을 새로이 채택하였으며 한 대의 PC로 64대의 단위 진공펌프들의 운전 상태변수를 실시간으로 수집할 수 있도록 하였다. 그리고 운전 중인 개별 진공펌프들의 운전 상태진단은 적응형 인자모델을 이용한 상태진단 기술을 응적용함으로써 매우 정확한 상태진단을 매 batch마다 수행할 수 있는 기능을 제공한다.