• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.277-283
• /
• 2014

Fuzzy modeling is generally using the given data and the fuzzy rules are established by the input variables and the space division by selecting the input variable and dividing the input space for each input variables. The premise part of the fuzzy rule is presented by selection of the input variables, the number of space division and membership functions and in this paper the consequent part of the fuzzy rule is identified by polynomial functions in the form of linear inference and modified quadratic. Parameter identification in the premise part devides input space Min-Max method using the minimum and maximum values of input data set and C-Means clustering algorithm forming input data into the hard clusters. The identification of the consequence parameters, namely polynomial coefficients, of each rule are carried out by the standard least square method. In this paper, membership function of the premise part is dividing input space by using trapezoid-type membership function and by using gas furnace process which is widely used in nonlinear process we evaluate the performance.

• Journal of Global Scholars of Marketing Science
• /
• v.7
• /
• pp.127-146
• /
• 2001

Attitude toward the advertising is widely used in studies of traditional mass media advertising. As internet marketing becomes more important, attitude toward the website will gain parallel status in evaluating effectiveness. And also, studies on relationship among attitude toward the website, attitude toward the advertising, attention to the commercial, attitude toward the brand, & purchase intention was needed. This study sets a hypothetical model about the relationship among attitude toward the website, attitude toward the advertising, attention to the commercial, attitude toward the brand, & purchase intention. And to testify this model, 10 hypotheses were set. The results of the analysis, all variables were related significantly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.114-123
• /
• 2018

Wind power tower (WPT) has been used to augment the performance of vertical axis wind turbine (VAWT). However, the performance of the WPT depends on several design parameters, such as inner and outer radius, or number of guide walls. Therefore, an experimental study was conducted to investigate efficient design parameters on the WPT. A wind tunnel was utilized and its test section dimension was 2m height and 2.2m width. One story model of the WPT was manufactured with seven guide walls and a VAWT was installed within the WPT. Three different sizes of guide walls were applied to test with various design parameters. The power coefficients were measured along the azimuthal direction in a state of equal inlet velocity in order to compare its performance relatively. The experimental results showed that the gap between the inner radius of the WPT and the rotating radius of the VAWT was a major parameter to improve the performance of VAWT within the WPT.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.43-56
• /
• 2004

The KHCM procedure is a micro level analysis at signalized intersections requiring a lot of input variables and complex computations. The research was to investigate the possibility of simplifying the analysis procedures by using the generalized or the combined variables that less influence on the adjusted traffic volume and through-car equivalents of left or right turns. It was also tried to make lane grouping into directional flow ratio(v/s) based on a field surveys. The maximum and minimum values of each variables were compared with each other through the KHCM analysis procedures in terms of control delay. The lane grouping and the synthetical influence of a simplified method was evaluated with the scenario built in prevailing maximum and minimum conditions. The study showed that the control delay was not significantly sensitive to the selected variables and the lane grouping and their synthetical influence as well.

• Journal of the Korea Society for Simulation
• /
• v.27 no.2
• /
• pp.11-24
• /
• 2018

The purpose of the present study is to develop an analysis model to analyze the design parameter sensitivity of a high-power drifter suitable for implementation in Korean hydraulic drills. This study aims to establish a basis for the optimization of the impact performance and stability of a high-power drifter by investigating the effects of each design parameter on the impact performance via design parameter sensitivity analysis. To begin, an analysis model of drifter dynamics is developed, and the reliability of the analysis model is verified by comparing the analysis results to the experimental results. The drifter is then redesigned for compatibility with Korean hydraulic drills. Finally, design parameter sensitivity analysis of the redesigned drifter is conducted to determine the effects of the design parameters on the impact performance, and to extract the high-sensitivity parameters. SimulationX, which is multi-physics analysis software, is used to develop the analysis model, and EasyDesign is employed for design parameter sensitivity analysis.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.423-432
• /
• 2017

This study used SSARR model to predict the flood hydrograph for the Miho stream in the Geum river basin. First, we performed the sensitivity analysis on the parameters of SSARR model to know the characteristics of the parameters and set the range. For the parameter calibration, optimization methods such as genetic algorithm, pattern search and SCE-UA were used. WSSR and SSR were applied as objective functions, and the results of optimization method and objective function were compared and analyzed. As a result of this study, flood prediction was most accurate when using pattern search as an optimization method and WSSR as an objective function. If the parameters are optimized based on the results of this study, it can be helpful for decision making such as flood prediction and flood warning.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.1
• /
• pp.64-70
• /
• 2010

The purpose of this study is to understand students' use intentions of Web Based Collaborative Learning (WBCL) system. To meet this purpose, we developed a research model based on the Decomposed TPB. This model contains 5 influencing factors: Explicit social influence(EXSI) and Implicit social influence(IMSI), Perceived Usefulness (PU), Perceived easy of use(PEOU), Perceived Playfulness(PP). Data was collected 254 university students from two different institutions. Also, the analysis is conducted to do the hypothesis testing by using PLS 3.0. The result shows that influence factors except PEOU have a important and significant impact on user Behavior Intention(BI). Using WBCL system and learning tool, team leader(that is referent) and members can be a good interaction. For these same reasons, We found that especialy Explicit social influence(EXSI) and Implicit social influence(IMSI) are special influence factors in reference group.

• Journal of Korea Port Economic Association
• /
• v.23 no.4
• /
• pp.228-243
• /
• 2007

This study porvides an empirical overview of the import patterns of Incheon port using an Engle-Granger cointegration technique and Johansen's multivariate cointegraion methodology test to check the stationarity of the model. The empirical results show that the import in Incheon port related to the economic variables. This paper also applies rolling regression to our model, indicating that import are endogeneous to the economic variable.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.286-286
• /
• 2018

하천에서 점착성 유사의 부유사는 입자 표면의 전자기적, 생화학적 점착력과 충돌에 의해 플럭(Floc)을 형성하고 응집된 플럭은 하천의 흐름 및 난류에 의해 파괴되기도 한다. 이 과정을 응집현상이라고 한다. 하천의 점착성 유사는 보통 플럭의 형태를 띠며 응집현상으로 인해 플럭의 밀도와 크기는 지속적으로 변화한다. 일반적으로 변화하는 플럭의 크기는 높은 질량 농도에서 증가한다고 알려져 있다(McAnally and Mehta, 2000; Maggi et al., 2007). 하지만 현장 연구에서 실측된 자료들은 종종 플럭의 크기와 농도가 반비례 관계를 가지는 경향을 보여준다(Gartner et al., 2001; Fettweis et al., 2006; Todd, 2014). 이에 따라 본 연구는 현장의 실측 자료가 일반적인 연구와 다르게 플럭의 크기와 농도가 반비례 관계를 가지는 현상을 규명하기 위해 점착성 유사의 이동을 모의하는 1차원 연직 수치 모형으로 수치 실험을 실시하고 그 결과를 분석한다. 수치 실험은 현장연구와 조건이 비슷한 이상적인 조류조건과 정류상태의 한 방향 흐름(Current Flow)을 함께 발생시키고 점착성 유사의 특징인 응집현상을 고려하였다. 모의 결과, 실측 자료와 같이 총 모의 수심 중 하상과 가까운 측정 수심에서는 플럭의 크기와 농도가 반비례 관계를 가지는 경향을 보였다. 그러나 측정 수심이 수표면 쪽으로 갈수록 플럭 크기와 농도가 비례하는 현상을 보였다. 이와 같이 서로 다른 두 가지 결과를 분석하기 위해 플럭의 크기를 결정하는 대표적인 매개변수인 농도와 난류의 강도를 나타내는 난류소산매개변수(Turbulent shear, G)를 가지고 새로운 매개변수를 만들었다. 플럭의 크기를 결정하는 방정식에서 농도는 응집의 과정에 G는 응집과 파괴의 과정에 관여한다고 알려져 있다. 새로운 매개변수로 총 모의 수심에 걸쳐 분석한 결과 하상에서 수표면 쪽으로 갈 때 난류와 농도 모두 줄어들지만 파괴와 응집의 우세를 나타내는 매개변수가 도치되는 현상을 보였다. 즉 하상부근의 강한 난류와 높은 농도가 응집현상을 만들지만 농도는 응집현상에, 난류는 응집과 파괴 모두 관여하므로 상대적으로 농도와 난류가 만들어내는 응집보다 난류가 만드는 파괴가 강할 때 플럭의 크기가 줄어드는 것으로 예측된다. 이에 따라 점착성 유사의 플럭 크기를 예측할 때에는 플럭의 크기가 농도와 선형의 관계를 가지는 것이 아닌 농도와 난류가 함께 작용하는 비선형 관계임을 고려해야 한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.127-136
• /
• 2013

This paper proposes a video deblurring algorithm which maintains uniform sharpness between frames. Unlike the previous algorithms using fixed parameters, the proposed algorithm keeps uniform sharpness by adjusting parameters for each frame. First, we estimate the initial blur kernel and perform deconvolution, then measure the sharpness of the deblurred image. In order to maintain uniform sharpness, we adjust the regularization parameter and kernel according to the examined sharpness, and perform deconvolution again. The experimental results show that the proposed algorithm achieves outstanding deblurring results while providing consistent sharpness.