• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.91-93
• /
• 2002

This paper presents a calculation method of iron loss in Induction Motor which is based on 2D Transient Finite Element Method. Iron loss is evaluated by the frequency analysis of flux density waveforms using Discrete Fourier Transforms (DFT) and iron loss curves data. Then. the distribution of loss and the total loss are obtained. The validity of this method is verified by the comparison of the estimated values with measured ones.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.3-5
• /
• 1999

This paper deals with the effect on the stress and deformation of the rotor bar of a cage induction motor by the thermal stress, centrifugal force and electromagnetic force. We use both the thermal network method(TNM) and the finite element method(FEM) to analyze the temperature and stress of the rotor.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.55-57
• /
• 1999

To control induction motor we have to know about dynamic characteristics including torque characteristic. Simulation and test were made to get dynamic characteristics using LabVIEW and Matlab. We got experimental results(e.g current, torque, speed etc) from starting to steady state with changing of load.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.46-48
• /
• 1999

This paper presents the design and characteristics analysis of a linear induction motor applied to molten metals. A linear induction motor is designed to increased to thrust and is applied to the experimental instrument. The experiment shows the availability of the LIM for transferring the molten metals.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.356-360
• /
• 1990

This paper is an application of Modern control Theory to the control of a current-source inverter (CSI) fed Induction Motor Drive System. A Linear Quadratic-Gaussian (LQG) scheme is developed, in which the Kalman Filter is tuned for high robustness by a method due to Doyle and Stein(8). The design is carried out for a sample system and the robustness by analysis and computer simulation.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1989.10a
• /
• pp.51-58
• /
• 1989

In this paper, the technique of particular harmonics elimination in three-phase PWM Inver-ter output waveform and the method for speed control of a squirrel cage I.M. are introduces. The required switching patterns are determind on personal computer and the results are stored in look-up table in EPROM for controlling the switching of the Inverter devices. In this system, the microprocessor(Intel 8086)computes the actual Motor speed from the pulses generated in a Incremental Encoder, compares the actual speed with the reference speed. And the PI(Proportional-Integral) controller is used to adjust the frequency of the Inverter that feeds the Motor.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.5
• /
• pp.41-50
• /
• 1995

Single-phase induction motors are widely used in many light duty applications, especially in home and office. many applications which use these motors require adjustable speed control continuously. In general, the speed control of single-phase induction motor is accomplished at a few discrete speeds by using tapped-windings, pole switching or gear. These techniques are inefficient and complicated. In this paper, Torque controller which adjusts a generating torque using phase difference between main winding voltage and auxiliary winding voltage is proposed. The analysis includes the determination of the relationship between the auxiliary winding voltage is proposed. The analysis includes the determination of the relationship between the auxiliary winding voltage phase angle and torque. Simulation results of the torque-speed characteristics using the controlled auxiliary winding supply are shown and discussed. and the drive is tested experimentally to verify the results of the theory by using a dynamometer.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.77-80
• /
• 2006

This paper based on spiral vector, three phase induction motor is described a detailed modeling by a phase segment methode. Based on this model, A torque control and the equation of regenerative power for the induction motor drive, based on the field acceleration method(FAM), is presented. The speed control system is designed to be applied voltage source inverters that is easy the current type feedback of power regeneration for motor drive. The ability of shaving power to be measured power regeneration has been investigated in speed acceleration and reduction. And it is change of stator resistance that the voltage commands include error, the ripple of exited voltage and torque occur from the results. The experimental tests verify the performance of the proposed regenerative drive for FAM, proving that good behavior of the drive is achieved in the transient and steady-state operating conditions.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.73-76
• /
• 1988

In this paper, the governing equation of the three phase linear induction motor is induced by the method that current in the primary winding is assumed as a current sheet. The steady state flux and the flux that is produced by end effect are mathematically analysed by electromagnetic equation. Each thrust of these flux is respectively induced. So in this paper, it is proved that linear motor is highly affected by end effect at high speed and speed-thrust characteristics of three phase linear induction motor are shown by frequency variation in the actual model.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.41-44
• /
• 1987

This paper is studied on the improvement of an efficiency and power factor for the single-phase induction motor with non-symmetrical cores. Since the motor construction having non-symmetrical core has the effect of reluctance torque and the rearrangement of revolving field, if core and winding design were optimized, the simple and economical permanent-capacitor-motor will be design. The most significant design variables are the degree of dissymmetry, the location of windings, and the turn-ratio between the main and auxiliary winding.