• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.637-642
• /
• 2013

In this paper, an analysis results of towing force and towing points which are dominating factors to determine the behavior of towed ship are introduced. The towing force and towing points to achive the desired posture and its position of the towed vessel are derived based on simplified dynamics and linearization method. LQR algorithm for posture control is applied to linearized system and numerical simulation is also executed. Force based on COG(cneter of gravity) and gain of controller to achieve desired posture for target vessel are obtained by using Riccati matrix equation and pseudo inverse matrix is applied to analyze the relation between the derived force and its towing point. Based on this analysis method, towing force need to move the towed vessel from its initial position to target position can be calculated. The towing method including towing point and direction is also considered on this method. Finally, the relation between towing force and towing point is confirmed from the analysis and the results can be applied to arrangement of tug boats during salvage works.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.169-180
• /
• 2007

Applicability of Land-based MMS(Mobile Mapping System) having been increased gradually as digitalization of administrative operation and construction of integrated systems of the government and provincial government are growing up. As these requirements, the case can be occurred that the facilities should be surveyed rapidly in the specific area. At this case, the real time field processing method is more necessary than the post processing method and data processing speed should be an essential element as important as accuracy. In this study, the two space intersection methods used in photogrammetry were programmed and compared with each other to select more proper method for the three dimensional positioning in the field processing. Especially, at the analytic space intersection, the traditional close range terrestrial photogrammetry was modified and applied to that to adapt to MMS's characteristics that camera position and attitude are changed according to the vehicle movement. As a result, the difference of the accuracy between two methods is not significant but at the calculation time, the analytic space intersection is faster three times than the space intersection using collinearity condition.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.393-406
• /
• 2018

Every year in the ocean, various accidents occur frequently and illegal fishing is rampant. Moreover, their size and frequency are also increasing. In order to reduce losses of life or property caused by these, it is necessary to have a means to perform remote monitoring quickly. As an effective platform of such monitoring means, an Unmanned Aerial Vehicle (UAV) is receiving the spotlight. In these situations where marine accidents or illegal fishing occur, main targets of monitoring are ships. In this study, we propose a UAV based ship monitoring system and suggest a method of determining ship positions using UAV multi-sensory data. In the proposed method, firstly, the position and attitude of individual images are determined by using the pre-performed system calibration results and GPS/INS data obtained at the time when images were acquired. In addition, after the ship being detected automatically or semi-automatically from the individual images, the absolute coordinates of the detected ships are determined. The proposed method was applied to actual data measured at 200 m, 350 m, and 500 m altitude, the ship position can be determined with accuracy of 4.068 m, 8.916 m, and 13.734 m, respectively. According to the minimum standard of a hydrographical survey, the ship positioning results of 200 m and 350 m data satisfy grade S and the results of 500 m data do grade 1a, where the accuracy is required for positioning the coastline and topography less significant to navigation order. Therefore, it is expected that the proposed method can be effectively used for various purposes of marine monitoring or surveying.

• Spatial Information Research
• /
• v.13 no.4 s.35
• /
• pp.373-380
• /
• 2005

Mobile Mapping Systems are effective systems to acquire the position and image data using vehicle equipped with the GPS (Global Positioning System), IMU (Inertial Measurement Unit), and CCD camera. They are used in various fields of road facility management, map update, and etc. In the general photogrammetry such as aerial photogrammetry, GCP (Ground Control Point)s are needed to compute the image exterior orientation elements (the position and attitude of camera). These points are measured by field survey at the time of data acquisition. But it costs much time and money. Moreover, it is not possible to make sufficient GCP as much as we want. However Mobile Mapping Systems are more efficient both in time and money because they can obtain the position and attitude of camera at the time of photographing. That is, Image Orientation Technique must use GCP to compute the image exterior orientation elements, but on the other hand Direct Georeferencing can directly compute the image exterior orientation elements by GPS/INS. In this paper, we analyze about the positional accuracy comparison of ground point using the Image Orientation Technique and Direct Georeferencing Technique.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.207-212
• /
• 2008

연구에서는 SPOT-3 인공위성 영상으로부터 얻어진 영상 스테레오 스트립과 GCP(Ground Control Point)자료를 이용하여 다양한 GCP배치에 따른 궤도기반 센서모델의 정확성에 대해 분석하였다. 실험에 사용된 기준점자료는 춘천지역에서부터 나주지역에 이르기 까지 약 420km 길이의 지역에 대해 GPS측량을 통해 획득하였다. 궤도기반 센서모델에 적용된 미지수는 위성의 위치와 속도, 자세를 표현하는 방정식의 계수를 미지수로 선택하여 일곱 가지 방식으로 조합하였다. 실험은 우선 모델점의 위치를 일곱 가지 경우로 결정하고 각 경우에 대해 일정한 개수의 모델점을 선택하였다. 그리고 각 경우의 모델점의 위치에 대해 궤도기반 센서모델의 미지수 조합 모델을 각 각 다르게 적용해 본 후 그 결과를 시각적, 수치적으로 분석해 보았다. 실험 결과 모델점의 위치에 관계 없이 궤도기반 모델에 적용할 수 있는 높은 정확도를 나타내는 미지수 조합모델을 찾아낼 수가 있었고, 여러 가지 모델점의 위치를 궤도기반 센서모델에 적용해 본 결과 지리적, 시간적, 경제적 효율성을 갖는 최적의 미지수 조합을 찾을 수가 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.104-113
• /
• 1996

In robot system, the robot manipulation needs the information of task and objects to be handled in possessing a variaty of positions and orientations. In the current industrial robot system, determining position and orientation of objects under industrial environments is one of major problems. In order to pick up an object, the roblt needs the information about the position and orientation of object, and between objects and gripper. When sensing is accomplished by pinhole model camera, the mathematical relationship between object points and their images is expressed in terms of perspective, i.e., central projection. In this paper, a new approach to determine the information of the supporting points related to position and orientation of the object using the robot vision system is developed and testified in experimental setup. The result will be useful for the industrial, agricultural, and autonomous robot.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1938-1939
• /
• 2011

본 논문에서는 랜드마크의 시선각 측정값을 이용하여 3D 비전항법해를 계산하기 위한 항법방정식을 유도하고 항법해 결정 방법을 보여준다. 먼저, 카메라좌표계에서 측정한 시선각과 항법좌표계의 관계를 이용하여 3차원 항법방정식을 유도하였으며 항법해를 계산하기 위해서는 최소한 3개 이상의 랜드마크를 관측해야함을 보였다. 또한 논문에서는 항법방정식과 기하학을 이용하여 항체의 위치 및 자세를 계산하는 과정을 상세하게 기술한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.392-393
• /
• 2022

In relation to the creation of an avatar that will become the main character in the metaverse environment, we design a system that automatically determines the shape of the avatar according to the situation and location by adjusting the details between immersion and privacy. In this study, as a way to control immersion in various virtual environments of the metaverse environment, we derive the hypothesis that immersion is determined by how detailed the original object is expressed. We conduct research that can adaptively control the expression information of avatars.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.357-358
• /
• 2008

본 논문은 GPS를 이용한 무인 비행체의 자율비행에 관한 연구를 다루었다. 비행체의 종류는 크게 고정익기와 회전익기로 나뉘는데 본 연구에서는 회전익기의 형태를 가진 Quarter Vehicle을 사용하였다. Quarter Vehicle은 4개의 프로펠러에 의한 양력과 회전 반발력으로 비행을 한다. 이때의 양력은 수평면에 대해 수직으로 추력을 발생시키므로 다른 비행체보다 불안정하며 이를 안정하게 제어하기 위해 관성 센서를 적용하여 균형을 유지한다. 본 연구에서는 UAV의 자세와 균형을 안정적으로 유지하기 위해 관성센서를 적용하였으며 GPS를 활용하여 독립적인 자율비행이 가능하도록 하였다. 정확한 위치정보를 제공하는 GPS는 3개 이상의 위성으로부터 시간 및 위치 정보를 받아 좌표를 계산하고 비행체의 위치, 속도 및 방향을 결정하여 자율 비행이 가능하도록 한다. 또한 초형 지자기센서를 비행체에 적용하여 GPS의 방향 정보를 보완하도록 하였다. 본 논문에서는 무인 비행체의 자율비행의 기초가 되는 위치좌표 계산을 위한 GPS의 적용 방법과 비행경로계획 알고리즘을 제시 한다.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.132-140
• /
• 2002

By utilizing OSMI (Ocean Scanning Multi-spectral Imager) onboard KOMPSAT-1, the moon can be imaged. Because the moon has no atmosphere and reflects sun lights at a constant rate, it can be the radiance source for calibration of OSMI. But there are a lot of risks which made KOMPSAT-1 enter into safe-hold mode. So planning the imaging of the moon with OSMI should be determined seriously with consideration to information on KOMPSAT-1 operation, the moon, the sun, etc. But it takes a long time for determining the imaging time of the moon using MCE(Mission Control Element) simulator and there are operational problems to be solved. In this paper, fast simulator for determining imaging time for the moon with OSMI has been developed. The proper timeline for imaging the moon and the position of the moon image in OSMI image coordinates and the phase of the moon are determined. STK was used for acquiring information on KOMPSAT-1, the moon, the sun and the characteristitcs of OSMI are considered. As a result, we can determine imaging time of the moon with OSMI much faster and efficiently.