• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1077-1083
• /
• 2012

The jamming countermeasures in GNSS includes anti-jamming technique and jammer localization technique. In both techniques, direction of jamming signal is important and generally the MUSIC algorithm is used to find the direction of jamming signal. The MUSIC is super-resolution algorithm for detecting incident direction of signal. But, the search time of MUSIC algorithm is too long because all candidates of incidence angle are searched. This paper proposes the new method that has less computational burdens and therefore faster than the conventional MUSIC algorithm. The proposed method improves performance speed by reducing unnecessary calculations. In the proposed method, the cost function of conventional MUSIC algorithm is decomposed into the sum of squares and if the partial sum of cost function is larger than the minimum cost function so far, then the candidate is rejected and next candidates are searched. If the computed cost function is less than the minimum cost function so far, the minimum cost function so far is replaced with newly computed value. The performance of the proposed method was compared with the conventional MUSIC algorithm using the simulation. The accuracy of the estimaed direction of jamming signal was same as the conventional MUSIC while the search speed of the proposed method was 1.15 times faster than the conventional MUSIC.

• Progress in Medical Physics
• /
• v.24 no.3
• /
• pp.191-197
• /
• 2013

Upon radiation treatment, it is the important factor to monitor the patient's motion during radiation irradiated, since it can determine whether the treatment is successful. Thus, we have developed the system in which the patient's motion is monitored in real time and moving treatment position can be automatically corrected during radiation irradiation. We have developed the patient's position monitoring system in which the patient's position is three dimensionally identified by using two CCD cameras which are orthogonal located around the isocenter. This system uses the image pattern matching technique using a normalized cross-correlation method. We have developed the system in which trigger signal for beam on and off is generated by quantitatively analyzing the changes in a treatment position through delivery of the images taken from CCD cameras to the computer and the motor of moving couch can be controlled. This system was able to automatically correct a patient's position with the resolution of 0.5 mm or less.

• KSBB Journal
• /
• v.19 no.2
• /
• pp.159-163
• /
• 2004

The X-ray structure of the cydodextrin-glucanotransferase of Bacillus macerans was solved by molecular replacement at 2.0 ${\AA}$ resolution. The refined structure has a crystallographic R-factor of 16.6%, (R$\sub$free/ = 20.5%). A new metal binding site occupied by two Ca$\^$2+/-ions was found at an accession channel of the active site. There is a large accumulation of negative charges that bind these Ca$\^$2+/-ions, thereby connecting segment ${\beta}$13-${\alpha}$G (residue 254-276) to the main body of domain A (at ${\alpha}$H, residue 283-297). The segment 313-${\alpha}$G contains the catalytic residue Glu258 between subsite 1 and -1 and Tyr260 (subsite 2) which is located at the entrance of the active site. The Ca$\^$2＋/-site 3a,b may have a major role for the activity and specificity of this CGTase, although it is not even conserved for the a-subclass of CGTases.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.25-32
• /
• 2010

In this paper, we analyze the location accuracy of real-time locating systems (RTLS) in multipath environments, where the RTLS complies with an ISO/IEC 24730-2 international standard. RTLS readers should have an ability not only to recover the transmitted signal but also provide arrival timing information from the received signal. In the multipath environments, in general, the transmitted signal goes through both direct and indirect paths, and then it becomes some distorted form of the transmitted signal. Such multipath components have a critical effect on deciding the first arrival timing of the received signal. To analyze the location error of the RTLS in the multipath environments, we assume two multipath components without considering an additive white Gaussian noise. Through the simulation and real test results, we confirm that the location error does not occur when the time difference between two paths is more than 1.125Tc, but the location error of about 2.4m happens in case of less than 0.5Tc. In particular, we see that the resolvability of two different paths depends largely on the phase difference for the time difference of less than 1Tc.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.348-353
• /
• 2004

This study is aimed for the implementation of ultrasonic method to assess the reliability of turbine bearings. A modified ultrasonic immersion technique was carried out in both laboratory experiment and field application. From the laboratory results, we confirmed that the condition of interface layer between the babbitt and base metal be monitored by the C-Scan. The C-scan image by the ultrasonic immersion test can be used successfully to observe the condition of interface layer. The testing with a focused transducer provides a promising approach for estimating the extent of the damaged region and observing the interface layer effectively. The difference of the ultrasonic reflection ratio between the bonding and debonding area at the interface layer is one of the key parameters for assessing the extent of the damaged area; additionally, the reflection amplitude exhibits a favorable correlation with the overall damage level. The technique developed in this study was applied to the inspection of the turbine bearings at several power plants in Korea whereby the applicability in the field can be ascertained.

• Journal of Radiation Protection and Research
• /
• v.39 no.2
• /
• pp.81-88
• /
• 2014

Recently, a new imaging method, gamma vertex imaging (GVI), was proposed for the verification of in-vivo proton dose distribution. In GVI, the vertices of prompt gammas generated by proton induced nuclear interaction were determined by tracking the Compton-recoiled electrons. The GVI system is composed of a beryllium electron converter for converting gamma to electron, two double-sided silicon strip detectors (DSSDs) for the electron tracking, and a scintillation detector for the energy determination of the electron. In the present study, the modules of a charge sensitive preamplifier (CSP) and a shaping amplifier for the analog signal processing of DSSD were developed and the performances were evaluated by comparing the energy resolutions with those of the commercial products. Based on the results, it was confirmed that the energy resolution of the developed CSP module was a little lower than that of the CR-113 (Cremat, Inc., MA), and the resolution of the shaping amplifier was similar to that of the CR-200 (Cremat, Inc., MA). The value of $V_{rms}$ representing the magnitude of noise of the developed system was estimated as 6.48 keV and it was confirmed that the trajectory of the electron can be measured by the developed system considering the minimum energy deposition ( > ~51 keV) of Compton-recoiled electron in 145-${\mu}m$-thick DSSD.

• Korean Journal of Microbiology
• /
• v.44 no.1
• /
• pp.56-62
• /
• 2008

Two hundred and sixty-eight bacterial strains were isolated from pine mushroom (Tricholoma matsutake) basal soil. In the course of screening for antifungal activity against seven plant pathogenic fungi (Alternaria panax, Botrytis cinerea, Colletotrichum gloeosprioides, Fusarium oxysporum, Phytopthora capsici, Pythium ultimum, Rizoctonia solani) of isolates, strain KM1-15 showed strong antibiotic activity against Alternaria panax and Colletotrichum gloeosprioides. In determining its relationship on the basis of 16S rDNA sequence, KM1-15 strain was most closely related to Bacillus $koguryoae^T$ (AY904033) (99.62%). When assayed with the API 50CHE Kit, unlike Bacillus koguryoae, it is positive for utilization of L-arabinose, cellobiose, inulin, and D-turanose. Results of cellular fatty acid analysis showed that major cellular fatty acids were 15:0 anteiso (35.78%) and 17:0 anteiso (17.97%). In particular, hydroxyl fatty acids such as 13:0 iso 3-OH, 14:0 iso 3-OH, 15:0 iso 3-OH, and 17:0 iso 3-OH were only restricted to strain KM1-15. DNA G+C content was 43.7 mol% and quinone system was MK-7 (100%) in strain KM1-15.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.691-697
• /
• 2005

Recently, the development of accurate gravity-meter and GPS make it possible to obtain high resolution gravity data. Though gravity data interpretation like modeling and inversion has significantly improved, gravity data processing itself has improved very little. Conventional gravity data processing removes gravity effects due to mass and height difference between base and measurement level. But, it would be a biased density model when some or whole part of anomalous bodies exist above the base level. We attempted to make a multiquadric surface of the survey area from topography with DEM (Digital Elevation Map) data. Then we constituted rectangular blocks which reflect real topography of the survey area by the multiquadric surface. Thus, we were able to carry out 3-D inversions which include information of topography. We named this technique, 3-D Gravity Terrain Inversion (3DGTI). The model test showed that the inversion model from 3DGTI made better results than conventional methods. Furthermore, the 3-dimensional model from the 3DGTI method could maintain topography and as a result, it showed more realistic geologic model. This method was also applied on real field data in Masan-Changwon area. Granitic intrusion is an important geologic characteristic in this area. This method showed more critical geological boundaries than other conventional methods. Therefore, we concluded that in the case of various rocks and rugged terrain, this new method will make better model than convention ones.

• Journal of Biomedical Engineering Research
• /
• v.20 no.6
• /
• pp.515-521
• /
• 1999

Scintillator crystal is an important part and detcrmines performance characteristics of the gamma camera. We investigated the offects of scintillation crystal surface treatment on gamma camera imaging. Nal(TI) and Csl(Tl) scintillators. 20 mm diameter and 10 mm thickness, applied with two different surface treatments, white and black reflcetors, were applied to Nal(Tl) and Csl(Ti). The optical properties of generated scintillation light were evaluated by Monte Carlo simulation method and by actual measurement using a position sensitive photomultiplier tube (PSPMT). We measured sensitivity, energy resolution and spatial resolution of gamma camera with the various scintillators coupled to a PSPMT. In the simulation. Nal(Tl)-white prosented the best sensitivity. In the measurements, the sensitivities and the intrinsic spatial resolutions of Nal(Tl)-white, Nal(Tl)-black. CsI(Tl)-white, CsI(Tl)-black were 2920, 2322, 1754, 1401 cps/$\mu$ci and 5.2, 4.5, 7.0, 6.3 mm FWHM. respectively. Their intrinsic energy resolutions were mesured 12.5, 23.5, 20.5, 33.3% FWHM at 140 keV Tc-99m. In this study, we investigated the offects of a side surface treatment of the scintillator on the gamma camera imaging. Simulation and measurement prescnted similat trends. Based on the results, we concluded that the surface of th NaI(Tl)seintillator must be treated by absorptive materials in order to develop the gamma camera having good spatial resolution.

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.137-142
• /
• 1997

At the tailings dam of the disused Brukunga pyrite mine in South Australia, reaction of groundwater with the tailings causes the formation and discharge of sulphuric acid. There is a need to improve remediation efforts by decreasing groundwater flow through the tailings dam. Geophysical methods have been investigated to determine whether they can be used to characterise variations in depth to watertable and map preferred groundwater flow paths. Three methods were used: transient electromagnetic (TEM) soundings, direct current (DC) soundings and profiling, and self potential (SP) profiling. The profiling methods were used to map the areal extent of a given response, while soundings was used to determine the variation in response with depth. The results of the geophysical surveys show that the voltages measured with SP profiling are small and it is hard to determine any preferred channels of groundwater flow from SP data alone. Results obtained from TEM and DC soundings, show that the DC method is useful for determining layer boundaries at shallow depths (less than about 10 m), while the TEM method can resolve deeper structures. Joint use of TEM and DC data gives a more complete and accurate geoelectric section. The TEM and DC measurements have enabled accurate determination of depth to groundwater. For soundings centred at piezometers, this depth is consistent with the measured watertable level in the corresponding piezometer. A map of the watertable level produced from all the TEM and DC soundings at the site shows that the shallowest level is at a depth of about 1 m, and occurs at the southeast of the site, while the deepest watertable level (about 17 m) occurs at the northwest part of the site. The results indicate that a possible source of groundwater occurs at the southeast area of the dam, and the aquifer thickness varies between 6 and 13 m. A map of the variation of resistivity of the aquifer has also been produced from the TEM and DC data. This map shows that the least resistive (i.e., most conductive) section of the aquifer occurs in the northeast of the site, while the most resistive part of the aquifer occurs in the southeast. These results are interpreted to indicate a source of fresh (resistive) groundwater in the southeast of the site, with a possible further source of conductive groundwater in the northeast.