• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.103-112
• /
• 2006

For recent innovation of If technology and the beginning of Digital Multimedia Broadcasting (DMB) service, it has been dramatically increased to setup TV system in a car for watching TV and receiving traffic Information. Watching TV while driving would distract a driver s cognitive and visual attention as eating food, operating the radio, using a cell phone. However, there is paucity of empirical researches and it is uncertain how watching TV in driving impacts on the driver's cognition in the concrete. Therefore, we surveyed domestic drivers on the attitude watching TV while driving as well as conducted experiments through a driving simulator. Especially, we recruited two groups of participants to explore the effects of watching TV on driving behavior. The result proved that the participants who watched TV while their driving had relatively narrower the attention span than the Participants who did not watch TV. Also, those who watched TV drove with less stability and more urgent operations of the brake and accelerator than those who did not watched TV Finally, we discussed limitations and implications of the study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1094-1103
• /
• 2012

Recently, software industry regarding national defense increases system development of distributed simulation system of M&S based to overcome limit of resource and expense. It is one of key technologies for offering of mutual validation among objects and reuse of objects which are discussed for developing these systems. RTI, implementation of HLA interface specification as software providing these technologies uses Federation Object Model for exchanging information with joined federates in the federation and each federate has a characteristic that is supposed to have identical FOM in the federation. This technology is a software which is to provide the core technology which was suggested by the United state's military M&S standard framework. Simulator, virtual simulation, and inter-connection between military weapons system S/W which executes on network which is M&S's core base technology, and it is a technology which also can be used for various inter-connection between S/W such as game and on-line phone. These days although RTI is used in military war game or tactical training unit field, there is none in Korea. Also, it is used in mobile-game, distribution game, net management, robot field, and other civilian field, but the number of examples are so small and informalized. Through this developing project, we developed the core technique and RTI software and provided performance of COTS level to improve communication algorithms.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.39-47
• /
• 2008

With dramatic development of IT technology and start of DMB service, installing the DMB equipment in a vehicle for watching TV programs and literal or pictorial traffic information are increasing. Watching the DMB during driving the vehicle could cause visual and cognitive distraction to drivers as much as eating food, operating radio and using mobile phone. However, there is not much empirical research for this topic and no research examined the effect of watching the DMB on driving behaviors in Korea. So, the present study examined the effect of watching the DMB on the driving behaviors with car simulator experiment. Within subject design was used in the study. That is, all subjects drove the vehicle both in the watching DMB condition and the non-watching DMB condition. The results indicated that subjects in the watching DMB condition took longer time to arrive at the destination and operated accelerator and brake pedal rapidly than subjects in the non-watching DMB condition. That is, their overall driving stability was lower than non-watching subjects'. Additionally, we examined the difference among the DMB control conditions (i.e., keypad condition, touch-pad condition and remote controller condition) in the driving behaviors. Finally, we discussed the limitations and the implications of the present study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.541-548
• /
• 2005

The research deals with the prediction and the measurement of electromagnetic wave propagation in rectangular shaped tunnels at f=2.65 GHz. The received power level was measured in the straight and the curved tunnel by using a spectrum analyzer and Satellite DMB mobile phone. Thus we have gotten the data for two cases, the straight and the curved tunnel whose radius is 300m. In addition, the prediction of wave propagation was conducted based on the ray-launching method, in same tunnel where measurement was performed. A good agreement of the measured and the predicted path loss could be confirmed. The measured path loss shows a marked difference in propagation loss: the path-loss exponent, 3.21, and 3.98, for a straight and a curved tunnel, respectively. The reason that path-loss exponent is high in a curved tunnel is that there is no direct wave but only the reflected waves, which attenuates rapidly with distance due to multiple reflections. Also the predicted path loss shows path loss exeponent, 3.2 and 3.95, for a straight and a curved tunnel which are similar to the simulation results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.781-788
• /
• 2016

In this paper, a real-time on-board orbit determination algorithm using the high precise orbit propagator is suggested and its performance is analyzed. Orbit determination algorithm is designed with the Extended Kalman Filter. And it utilizes the orbit calculated from the Pseudo-range as observed data. The performance of the on-board orbit determination method implemented in the GPS-12 receiver is demonstrated using the GNSS simulator. Orbit determination performance using high precise orbit propagator was analyzed in comparison to the orbit determination result using $J_2$ orbit propagator. The analysis result showed that position and velocity error are improved from 43.61 m($3{\sigma}$) to 23.86 m($3{\sigma}$) and from 0.159 m/s($3{\sigma}$) to 0.044 m/s($3{\sigma}$) respectively.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.22-30
• /
• 2009

GPS and INS integrated systems are expected to become commonly available as a result of low cost Micro-Electro-Mechanical Sensor (MEMS) technology. However, the current performance achieved by low cost sensors is still relatively poor due to the large inertial sensor errors. This is particularly prevalent in the urban environment where there are significant periods of restricted sky view. To reduce the inertial sensor error, GPS and low cost INS are integrated using a Loosely Coupled Kalman Filter architecture which is appropriate in most applications where there is good satellite availability. In this paper, we present the GPS/INS sensor Integration using Loosely Coupled Kalman Filter approach. We also compare the simulation results of Wander Azimuth Strapdown Mechanization Scheme with the reference values generated by the ZH35C trajectory simulator that is describe mathematically either by the geometry of the path, or as the position of the object over time.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.77-85
• /
• 1997

Researches in the field of Computer Graphics and Geographical Information Systems(GIS) have extensively studied the method of photo-realistic landscape modelling, because it have become a commom requirement in applications such as flight simulators, mission rehearsal, and construction planning. A common approach to the display of terrain uses a Digital Elevation Model(DEM). DEM is an evenly spaced array of the terrain elevation data and can be obtained from stereo satellite data. With the DEM data, the process of 3D terrain modelling consists of three steps. The first step is to extract the meaningful data (such as peak, pit, passes...) from DEM data based on LOD(Level Of Detail) criteria. The second is to construct the 3D surface by TIN, which represents a surface as a set of non-overlapping continuous triangular facets of irregular size and shape. The third is a rendering of 3D terrain model. The goal of this research is a construction of 3D terrain with TIN. To do this, we are going to app]y Radial Sweep Algorithm. Radial Sweep Algorithm for generating TIN works quickly and efficiently. However, it does not solve the problem caused by the approximated nature of triangulated surface. To solve this problem, this research derive improved radial sweep algorithms with the optimal triangle definition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.855-862
• /
• 2009

This paper contains the signal receiving algorithm for Galileo E5 AltBOC signal and the development of Galileo E5 signal receiving software. The software runs the process from signal acquisition to extracting measurement data to get navigation solution. It uses logged IF data file as an input. In signal acquisition stage, 1ms and delayed 1ms data are used for reducing correlation ross from secondary code and navigation bit conversion. Signal tracking stage is made of two stages which are coarse tracking and fine tracking. It is for taking advantage of AltBOC characteristic and resolving ambiguity problem due to BOC modulation. The functions of software are verified by signal processing using logged IF data from commercial GNSS simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.857-864
• /
• 1998

The infuluence of Doppler effects on the tracking performance of a noncoherent second-order delay locked loop (DLL) operating on a data modulated signal is investigated. For the perfoermance analysis we consider the tracking accuracy (steady state error and jitter) of the linear DLL and the reliability of the nonlinear loop. The nonlinear analysis concerning the loop reliability makes use of an asympototic expansion for the MTLL(mean time to lose lock) which has been derived by applying the singular perturbation method. In particular, we give optimal loop parameters and the optimal bandwidth of the bandpass filter in the loop arms to achieve a maximum MTLL. Since Doppler effects can be producesd comparatively in LEO system, we can espect the more reliable DLL loop design. by using the results of the circuit simulation, the delay lock loop is synthesized in FPGA, and verified to get the GPS data from the STR-2770 GPS simulator system. So, the synthesized logic circuit is shown be accurately performed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1388-1398
• /
• 2012

SAR(Synthetic Aperture Radar) systems can provide images of wide coverage in day, night, and all-weather conditions. However wideband SAR systems are known to be vulnerable to interferences from other devices operating at in-band or adjacent spectrums and this may lead to image corruptions. In this paper, a SAR point target simulator is developed that provides performance analysis on image distortion caused by interferences from other devices. Interference signals are generated based on the experimental data observed from acquired SAR raw data. Simulation results include typical SAR performance measures such as spatial resolution, peak to sidelobe ratio and integrated sidelobe ratio. Finally, SAR target simulations are performed and shown to correspond to the image corruptions found in real SAR missions affected by RF interferences.