• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.169-174
• /
• 2018

In this paper, a design method for a wideband LPF for harmonic suppression applications is investigated. The proposed wideband LPF is comprised of four circular slot pairs with different diameters, which are added symmetrically in the ground plane of a CPW transmission line. Four circular slot pairs act as a defected ground structure and provide a wideband low pass characteristic. The circular slot with the smallest diameter is located at the side of port 1, and the diameter of the circular slot is increased as it goes toward port 2. The low pass characteristics of each circular slot are compared with the proposed wideband LPF. The final designed LPF was fabricated on FR4 substrate, and its characteristics were tested. The measured S11 characteristic was maintained at over -3.3 dB in the frequency range of 1.89-20.00 GHz band, whereas the S21 characteristic was less than -21.4 dB in the frequency range of 2.66-20.00 GHz.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.63-63
• /
• 2003

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.95-100
• /
• 2006

In this paper, we designed amplitude equalizer which is composed of amplifier, complementary shaping filter and attenuator in order to improve flatness of high order bandpass filter. We modified Chebyshev polynomial and calculated the prototype elements for complementary shaping filters by network synthesis. The amplitude equalizer is realized that it connects the 4th order complementary shaping filter designed by using calculated the prototype elements to the amplifier compensating for insertion loss and improving return loss, and with the attenuator for gain control. Using proposed amplitude equalizer, We certificated improvement in flatness of 13th order bandpass filter at WiBro band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.893-899
• /
• 2010

In this paper, the design of a new bandpass filter based on the modified circular mushroom metamaterial structure is proposed. In detail, half circular mushroom cells are used as the zeroth order resonators(ZOR), and an intermediate gap is adopted to introduce the coupling between neighboring ZOR resonators. The proposed bandpass filter design is validated by the circuit and 3D EM simulations and measurements compared to the target specifications, and the metamaterial properties are proved by the ZOR field distributions and dispersion diagram. Also, the effect of size reduction is addressed.

• 도로교통
• /
• s.91
• /
• pp.38-42
• /
• 2003

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.68-72
• /
• 1992

자동차 및 각종 판재 성형시 성형율을 향상시키는 방법에는 신소재 개발, 금형기술개발, 접촉부의 마찰을 줄여 주기 위한 윤활 등등이 있겠으나 손쉽게 공구다이 상하에 비드를 설치하여 판재를 성형할 경우 미끄럼 저항의 균형을 이루어 주름 억제와 두께분포가 보다 균일해지며 스프링백 현상 등으로 인한 성형 후 치수 불량 등을 주어 판재성형율을 향상시키는데 기여할 수 있다. 본 연구에서는 펀치가 판재를 성형하기 위해 진행됨에 따라 공구다이와 펀치간의 접촉각도가 변하게 되는 점을 고려하여 인출 각도변화에 따른 인출특성 및 마찰계수 변화등을 알아보고자 하며 원형 형태의 환저비드, 단일원형비드, 이중원형 비드의 종류와 크기변화 및 비드좌우 모서리 변화, 공구다이모서리변화, 블랭크가압력 변화, 비드 전진깊이 변화, 비드통 과 후 재료의 기계적 성질 변화등 인출 특성에 영향을 미치는 인자들을 변화시켜나가며 이에 따르는 인출특성을 Data Bank화 시켜 비드 종류나 형상에 따른 금형설계의 기초자료를 제공하고자 한다.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.125-137
• /
• 2021

This study was intended to develop a prototype of new Hanbok Cheollik one-piece based on design extracted through a preference survey on new Hanbok Cheollik one-piece. Through this, it was intended to provide information on patterns that are fundamental to the production of new Hanbok Cheollik one piece. The pattern of the experiment was produced by modifying D pattern, which was selected as excellent in the comparison of commercial Cheollik one-piece patterns. The SPSS 26.0 program was used to analyze the appearance evaluation of patterns. As a result of the 1^st evaluation of appearance and garment pressure, the shoulder, sleeve length, skirt length and sleeve width required modification, reducing the sleeve length by 8.0cm and the sleeve width by 1.0cm in total. The length of the skirt was reduced by 5.0cm and the shoulder end point was reduced by 0.5cm on both sides to modify the shoulder width. As a result of the 2^nd evaluation, the waist area, sleeve width, and skirt wrinkles were required to be corrected, reducing 2.0 cm waist width and 1.0 cm sleeve width and removing wrinkles on the front center and side area. The final pattern was highly appreciated. In future studies, it is thought that research should be conducted through study of Cheollik one-piece pattern according to material and age and the actual wearing experiment according to fabric and age.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.2
• /
• pp.94-98
• /
• 2013

A new species, Daphne jejudoensis M. Kim, has been named and described from Seonheul, Jejudo Province, Korea. Daphne jejudoensis shares several characteristics (white calyx colors, long calyx tube, evergreen leaves, leathery leaf textures, etc.) with its related species D. kiusiana, but it is distinct from D. kiusiana which has a hairy calyx tube and lobes, short calyx lobes, oblanceolate leaves (with acute apex), and a different distribution (coastal region in Geojedo Is.) by having a glabrous calyx tube and lobes, long calyx lobes, elliptic leaves (with acuminate apex), and by its distribution (inland region in Jejudo Is.).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.618-633
• /
• 2000

In this paper, a Gaussian interpolation filter and cubic interpolation filter are presented to do more accurate channel estimation compared to the conventional linear interpolation filter for COFDM systems. In addition to an interpolation filter, a low pass filter using FFT and IFFT is also presented to reduce the noisy components of a channel estimate obtained by an interpolation filter. Channel estimates after low-pass filtering combined with interpolation filters can lower the error floor compared to the use of only interpolation filters. Computer simulation demonstrates that the presented channel estimation methods exhibit an improved performance compared to the conventional linear interpolation filter for COFDM systems in time-varying multipath fading channel and0.1 ~ 0.2 dB of Eb/No difference at BER=10-4 when the perfect channel estimation is compared.

• Journal of the Korean Geosynthetics Society
• /
• v.3 no.4
• /
• pp.13-19
• /
• 2004

This paper presents the results of an investigation on the failure mechanism of geosynthetic-reinforced segmental retaining walls in tiered arrangement using reduced-scale model tests. In this laboratory model tests, a reduced scale model of the full-scale geosynthetic-reinforced wall which was constructed in Geotechnical Experimental Site at Sungkyunkwan University was used to perform a study on the failure mechanism. In order to a high degree of realism, the geometry of the wall and the material properties were selected applying Similitude Laws was used to perform laboratory model tests. And contrary to the previous failure tests with various surcharge pressures, the failure by the tired wall weight was observed. Primary variables considered in the model tests include the different offset distance between the tiers and the different reinforcement length in the lower tier and as a result of the parametric study, a different failure pattern was observed.