• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1426-1440
• /
• 2008

In Korea, the concentration for the use of urban railroads is comparatively high during peak hours. In case of road traffic, overcrowdness leads the increase of total travel time and cost naturally but this does not happen in railroad systems because of fixed operational interval. Thus, passenger's disutility is generated physically and mentally from congestion increment. The increase of railroad capacity from new transit lines and expansion of existed lines contributes traveler's comfort benefits to rising. However, present evaluation guidelines for feasibility studies of road and railroad projects do not include any valuation methodology about passenger's comfort benefits. Therefore, in this research, various factors affecting comfort benefits are reviewed and stated preference survey is performed in order to estimate traveler's comfort benefits for congestion reduction. In addition, willingness to pay for congestion avoidance is calculated from that stated preference survey based on Tobit Model. As a result, detailed unit for willingness to pay according to congestion reduction is proposed in this study.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.647-655
• /
• 2016

The construction of high speed railways and improvement projects of for conventional railways require straight railway lines of railway, which leads to an increase of bridge and tunnel construction. Transition zones in railways means that the track support stiffness is variedvaries in over short ranges. Sspecial attention is required in theose transition zones since because instability of train running in train and irregularities of track irregularities are can frequently occurred. Typical transition zones are between bridges and earthworks and between tunnels and earthworks. On In a transition zone, a bridge abutment transition zone has many problems in with various causes. In this paper, fundamental problems of bridge abutment transition zones is are analyzed to enhance the understanding about of bridge abutment transition zones. Suggestions for improving problems in the transition zones are proposed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.87-94
• /
• 2002

As a section insulator dividing the electric railroad catenaries with different phases, the AC/DC section insulator which divides AC and DC railroad catenary have the complex structure, and suffer irregular abrasion on the surface or insulator rods when it is installed at the underground railroad. This paper intended as an investigation of the irregular abrasion of section insulators, provides the field measurements of abrasion level along insulator length and the abrasion patterns. The height variation of insulator parts and the balding length of insulators against pantograph's contact force are analysed experimentally, and the irregular abrasion mechanism is clarified with the help of theoretical analysis on the interaction between pantographs and section insulators. On the basis of experimental and theoretical analysis, the countermeasures to reduce the irregular abrasion are provided too.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.454-456
• /
• 2010

The demands for (a) individual vehicle has been gradually increasing recently due to increase of personal income and spare time. In 2009, the quantities of registered vehicles exceeds over 17,325,210 millions pieces, and the risks of traffic accidents and traffic jam are increasing days by days. It has some limitations to solve the problem of traffic jam by transportation facilities and causes lots of time and costs. For a possible solution, ITS(Intelligent Transport System) has been introduced, but it is an insufficient way for abrupt incidents or risks on roads. The riskiest matter on driving a vehicle is unforeseen situation. In this paper, the most efficient and economical system that communicates with a driver about unexpected accident by sensor network and GPS information, is introduced rather than a traditional method associated with lots of time and costs.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.41-47
• /
• 2009

This study deals with the side-swipe accidents of 4-legged signalized intersections in Cheongju. The objectives are to analyze the characteristics of the accidents and to develop the related models. In pursuing the above, this study gives particular emphasis to finding the appropriate methodology to modelling. The main results are as follows. First, injuries were analyzed to be twice than property-only accidents in the side-swipe accidents. The accidents were evaluated to occur more in inside-intersection. Also, the accidents were analyzed to be almost the auto-related accidents and to be occurred by the unsafely-driving activity. Second, multiple linear regression models were evaluated to be more statistically significant than multiple non-linear. The most fitted models were analyzed to be the models with the number of accidents as the dependent variable. The factors of side-swipe accidents analyzed in this study were ADT, area of intersection, right-turn-only-lane, number of pedestrian crossings, limited speed of main road, maximum grade and number of signal phase.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.266-283
• /
• 2022

With the rapid development of autonomous vehicle technology, unexpected accidents are occurring. Therefore, it is necessary to minimize user accident damage through the development of autonomous traffic safety education. Since edge cases, accident type, and risk factor analysis are important for realistic education, overseas case studies and demonstrations were carried out, and based on this, two curriculum for service providers and general users were developed. The service provider curriculum consisted of OEDR, sudden stop, cut-in, take-over, defensive driving, system malfunction, policy and information security education, and the general user curriculum consisted of attention duty, take-over, operating design domain, accidents type, laws, functions, information security education.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.165-176
• /
• 2022

In order to prevent various accidents with construction machinery, Korea enacted the Construction Machinery Management Act to enhance safety. Until now, there has been a lack of systematic research related to traffic accidents with construction machinery. Therefore, domestic and foreign systems related to construction machinery were reviewed, and the current status was analyzed based on traffic accident data over the past 5 years to derive implications. It is necessary to ensure the safety of construction machinery by correcting institutional loopholes and preparing follow-up measures. In addition, it is necessary to create a separate traffic-safety education program for construction machinery operators to create an environment that can comply with safe road-driving methods and traffic laws.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3D
• /
• pp.363-371
• /
• 2009

The purpose of this study is to verify the safety issue of the tinted vehicle based on the field study as well as the issue of the capacity reduction from the tinted vehicle. Through this study, an innovative experimental method to verify the issues was developed using RTK GPS receivers, and a data collection was conducted using the developed experimental method. Using the collected data, the effects of the ahead vehicle with the windows tinted on the traffic condition such as headways and acceleration noise were analyzed to test that the ahead vehicle with windows tinted too darkly affects the increasing vehicle maneuver as following the degree of tinting. This study was conducted as a frontier study and more studies, for example, full scale analyses considering various road and vehicle conditions need to be conducted in the future.

• The Korean Journal of Air & Space Law and Policy
• /
• v.20 no.1
• /
• pp.45-85
• /
• 2005

The purpose of this paper is to examine the concept of "accident" under the Warsaw system including the Warsaw Convention for the Unification of certain Rules for International Carriage by Air of 1929 and the Montreal Convention of 1999. Most leading case on this subject is Air France v. Saks(470 U.S. 392 (1985)). In the Saks case, it was held that the definition of an accident must be applied flexibly, and most courts have adhered to the definition of accident in Saks case, the application of accident has been less than consistent. However, most cases have held that if the event is usual and expected operation of the aircraft, then no accident has occurred. Courts have also held that where the injury results from passenger's own internal reaction to the usual, normal, and expected operations of the aircraft, it is not caused by an accident. As the Warsaw drafters intended to create a system of liability rules that would cover all hazards of air travel, the carrier should liable for the inherent risks of air travel. It is right in that the carrier is in a better position than the passenger to control the risks during air travel. Most US courts have held that carriers are not liable for one passenger's assault on the other passenger. The interactions between passengers are not part of the normal operations of the aircraft and are therefore not covered by the word "accident" under Art 17 of the Warsaw Convention. It is regretful that the Montreal Convention did not attempt to clarify the concepts of accident in itself. In the light of an emerging tendency to hold the air carrier liable for occurrences that do not exactly go to the operation of the aircraft, it is desirable to regulate that the carrier is liable for an "event" instead of an "accident" in accordance with the Guatemala City protocol.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.28-38
• /
• 2016

Cooperative-Intelligent Transport Systems (c-ITS) has emphasized a real-time traffic safety service in urgent situations among highway infrastructure and four-wheeled vehicles, while two-wheeled vehicles, e.g. bicycles and motorcycle, sharing highway space and endangering highway safety, have yet been out of its interest. This paper delivers the results of a study conducted to analyze the patterns of two-wheeled-vehicle traffic accidents experienced in the past, the last three years (2011~2013), and to propose the types of service enhancing the safety of the riders of those. It was found from the analysis of historical accident data that the side collision on a link section should be taken care of for further safety treatment, while the old female drivers need additional care to decrease their fatality rate. By combining the services proposed for bicycles and motorcycles, this paper proposes (1) eight different bicycle-to-everything (B2X) services which can be eventually provided in c-ITS and (2) three of those that would be available in the near future with the current communication technologies.