• Journal of the Korea society of information convergence
• /
• v.5 no.2
• /
• pp.49-58
• /
• 2012

Korea has entered into an aging society at an exceptionally high speed. Increasing aged workers give pressure on Korean companies with seniority based pay system with labor costs. The wage peak system has been introduced to Korean companies as an alternative to early retirements. The wage peak system currently adopted in Korea is mainly the aging-limit-security model. But in the future we should actively adopt the employment-extension model. To operate wage peak system successfully, I suggest introduction of the individual wage peak system, development of suitable jobs for the aged, selective application by job classification, incentive graded by performance evaluation, and working hour reduction with the decreased rate of wage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.85-87
• /
• 2012

This paper, UAVs of the secondary communication link that applies to the analysys of time-division communication system and communication method proposed algorithm has been developed. UAVs of the important characteristics of the data link latency and throughput, the frequency is availability, weight. The data needed to operate UAVs vehicle control data, status data, there is an acquisition. Control and data acquisition will require real-time communication. Based on the requirements being applied to the secondary communication link communication method were compared and analyzed. The results of analysis of ground-base TDD method is suitable.

• The Magazine for Energy Service Companies
• /
• s.54
• /
• pp.64-69
• /
• 2008

야간의 잉여전력으로 열을 저장해두었다 주간에 이용하는 축열공조에는 50여년에 걸친 긴 역사가 있었다. 이 방식이 가지는 효용에 일찍부터 눈뜬 선각자들의 노력에도 불구하고 당초 보급은 늦어져 그다지 진전이 없었다고 한다. 이러한 정세가 일변한 것은 전력공급에 병목현상이 생겨 부하 평준화가 안정공급에 있어 필요불가결의 과제가 되었기 때문이다. 특히 공조는 피크성이 강한 수요이므로 공조용 전력을 야간으로 옮기는 작업의 이점이 큰 것은 당연하다. 비 수요시간대의 요금이 큰 폭으로 떨어짐으로써 수요자측에서 보아도 야간의 전력을 어떻게 활용할까하는 것은 매력적인 연구테마였다. 이리하여 축열공조가 관심을 불러 보급이 기도에 놓인 지 2O년 가까이 되었다. 처음에는 물을 사용한 축열이 대부분이었으나, 축열조 용량의 제약으로 얼음을 만들어 저장하는 빙축열방식이 도입되어 현재의 표준적인 축열방식이되었다. 그러나 빙축열에도 비용상의 문제가 있어 전면적인 보급에 이르기까지는 아직 연구의 여지가 더 남아있는 듯하다. 한편, 교토의정서의 발효 등에 의해 지구환경에 대한 관심이 높아지게 되었다. 이 같은 배경 속에 건물및 건축설비의 에너지절약 기술의 중요성이 대두되고, 특히 창 주변의 공조방식, 조광제어, 축열 공조시스템 등, 건물부하의 직접적인 저감과 전력부하 평준화에 의한 환경부하저감 및 운영비용의 저감을 목적으로 한 건물일체형 설비시스템을 적극적으로 도입하기에 이르렀다. 환경을 배려한 건축구조.설비시스템의 채택 사례가 증가하며 건축물 종합환경성능 평가시스템과 성능검증 등 건물설비의 평가.검증 수법도 연구되어 건물에 적합한 운용면에서의 사고가 중요함이 인식되었다. 이와 같이 건축구조와 설비시스템의 양면에서 에너지절약성 및 환경성, 쾌적성, 편리성의 추구가 적극적으로 도입되는 가운데, 슬래브축열시스템은 건축구조와 공조설비가 균형있게 융합됨으로써 초기비용의 삭감과 부하 평준화에 의한 경제성 향상, 복사에의한 실내환경의 향상 등의 효과를 기대할 수있는 시스템으로 추목받고 있다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.107-114
• /
• 2020

This paper studies a method for estimating the scale of a Hadoop cluster to process big data as a cost-effective manner. In the case of medical institutions, demands for cloud-based big data analysis are increasing as medical records can be stored outside the hospital. This paper first analyze the Amazon EMR framework, which is one of the popular cloud-based big data framework. Then, this paper presents a efficiency model for scaling the Hadoop cluster to execute a Mapreduce application more cost-effectively. This paper also analyzes the factors that influence the execution of the Mapreduce application by performing several experiments under various conditions. The cost efficiency of the analysis of the big data can be increased by setting the scale of cluster with the most efficient processing time compared to the operational cost.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.27-33
• /
• 2003

This paper proposes the efficient audit method for the distributed connection information in ATM switch. Based on this method, we design the periodic audit function by a system and immediate audit function by a operator's order. We evaluate the performance about the proposed Audit method. At the result of evaluation, We figure out that the load of call control processor is almost independent of a system load regardless of audit function operation. Therefore, we confirm that the proposed audit method nearly have an effect on the load of call control processor. The proposed audit method can reestablish a Mismatched connection information with a little load.

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.136-142
• /
• 2005

This paper describes some major schemes for developing timing signal generator which can be used for testing of 3D radars. The developed generator has a function not only to simulate information on elevation angle for the simulated target signals but also to generate a modulated signal up to 80MHz. Because this generator has an internal modulating function instead of an external modulating function and has sufficient memory enough to change the parameters according to operating programs, it realization of various test-environments for testing a radar can be made with easy and with low expense.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.135-143
• /
• 2011

Currently network management systems(NMS) just give useful information about the criticality of the alarms and the process of the fault analysis is mainly dependent on the experts who have many years experiences in the field. Due to these reasons it takes very much time and manpower cost to localize the real root of the fault from the alarm information. Therefore, to solve these problems in this research we analyze the probability of the fault for each alarm and provide how to give the problem solving procedure with confidence level and give idea to build a system to realize the problem solving procedure. In addition, we give a case study to show how to use the proposed ideas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8608-8615
• /
• 2015

We developed a system that can collect and transmit real-time environmental data such as temperature, humidity, wind direction, and wind speed, and equipment performing aging tests on fire detectors. This system was installed in three representative sites of railway tunnels in South Korea such as Gumjung, Solan, Seoul Subway Line 4 tunnels. The systems showed a stable performance and collected environmental data for over a year. We analyzed environmental data collected by two of our developed systems installed in the running tunnels of Gwacheon Line of Seoul Subway Line 4. The developed system was capable of safely analyzing tunnel environments for 24 h straight using a wireless communication network, and has potential for use in a variety of fields other than tunnels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.5-12
• /
• 2005

Establishment of bandwidth and effective traffic processing are required to treat various traffics according to a rapid increase in Internet traffic. A wavelength based transferring method was introduced to support a broadband bandwidth according to this requirement, and consequently, a label processing procedure has been investigated to treat various traffics. This paper introduces a regular shape of stack structure in order to solve the present MPLS label stack processing unit, and analyzes the relationship to label merging, which is initiated between label merging inside and outside the LSP tunnel. By applying an adaptive label structure and merging point a hierarchical label, which is aroused in the GMPLS, can be uniformly simplified and improved from the perspective of cost and processing time at a node

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.177-182
• /
• 2007

최근 텔레매틱스 분야에서 GPS 수신기를 장착한 probe car를 통해 교통 정보를 수집하는 방법에 대한 연구가 활발히 진행되고 있다. 이 방법은 기존에 교통 정보를 수집하기 위해 활용되고 있던 고정식 검지기들에 비해 수집되는 정보가 높은 신뢰성을 가지고, 도로 환경에 민감하지 않으며, 낮은 유지비용으로 운용할 수 있다는 장점을 가지고 있다. 하지만, probe car는 자신의 위치 정보를 교통 정보 센터로 전송해 주어야 하기 때문에 프라이버시가 노출될 수 있고, 주차되어 있는 시간에는 통행 정보를 보내줄 수가 없다. 이런 이유로 대중 교통차량이나 상업용 차량이 주로 probe car로 활용되어지게 되는데, 그 수가 많지 않을뿐더러 운행 구간이 고르게 분포되지 않아 probe car가 지나지 않는 구간, 즉 교통 정보 누락 구간이 존재할 수 있는 문제점을 가지고 있다. 본 논문에서는 교통 정보 누락 구간의 처리를 위해 과거의 이력 정보로 대체하는 방법, 주변 도로의 구간 정보로 예측하는 방법, 회귀 분석을 통한 예측 방법 등을 기술하고 실제 probe car들로 수집된 서울시 강남대로 구간의 자료로 각 방법에 대한 실험을 실시하여 각각의 방법에 대한 결과를 비교 분석한다.