• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.38-45
• /
• 2003

This research is concerned with the dynamic modeling of the multi-purpose satellite with deployable solar arrays equipped with strain energy hinges(SEH). To this end, we proposed the use of the equivalent torsional spring for the SEH and derived the equations of motion assuming that the satellite and solar arrays are being rigid. We also considered the effect of the support string for the ground experiment model, which has been observed as a critical factor affecting the deployment in the ground experiments. From the numerical simulation results, it is found that solar arrays are deployed in a similar pattern but the hub motions are different because of the support strings. It was concluded that the non-gravity deployment of the solar arrays can be approximately simulated by the ground experimental facility. The effects of the support string are also investigated by varying the length of the string. It was found that the current length of the string is adequate for the ground experiment. Ground experimental results will follow.

• The Southeast Asian review
• /
• v.24 no.1
• /
• pp.1-43
• /
• 2014

1905년에 시작된 베트남 동유운동의 목적은 베트남의 젊은이들을 일본에서 공부시켜 독립과 근대화를 이끌 인재를 양성하는 것이었다. 그러나 1908년 일본 정부의 강제 출국 조치로 인해 동유운동이 중단됨으로써 목표했던 바를 이루는 데 실패한 것으로 평가되고 있다. 하지만 다른 시각에서 본다면 200여 명의 베트남 학생들이 수년간 유학을 한 결과가 어떠한 형태로든 베트남 근대사에 족적을 남겼을 것이라고 추측하는 것도 가능하다. 그간의 연구는 동유운동을 주도했던 판보이쩌우(Phan Bội $Ch{\hat{a}}u$)에 집중함으로써 학생들의 면면에 대해서는 크게 알려진 바가 없다. 이 연구는 당시 일본으로 유학했던 학생들에게 초점을 두어 그들이 누구인지 무엇을 공부했는지, 또한 당시 사회주의 사상 전파의 중심이었으며 아시아 각국의 혁명가들이 집결해있던 동경에서 학생들은 어떤 영향을 받고 어떻게 연계되었는지에 대해서 살펴보았다. 학생들 대부분은 동아동문서원이라는 중국인 유학생 예비학교의 특별반에서 일본어와 기초적인 초등교육 과목을 이수하는 데 그쳤고 단 세 명의 학생만이 군사예비학교인 진무학교를 졸업할 수 있었다. 즉 고등교육을 받은 학생은 전무했던 것이다. 강제 출국되기까지 그 기간이 짧았던 것이 가장 큰 원인임에 분명하지만 한편으로는 동유운동 자체가 철저히 준비되고 계획되지 않았던 점도 실패의 주요 원인으로 꼽을 수 있다. 특히 학생 선발에 대한 규정 없이 기본적으로 누구든지 수용함으로써 학생들의 절대다수가 10대 초중반이 되는 결과를 낳았다. 이는 독립과 혁명을 위한 인재 양성이라는 취지와 관계없이 다수의 학부모들이 동유운동을 단순히 자녀교육의 수단으로 이용했기 때문이다. 또한 이들을 입학시킬 학교 섭외조차 되지 않았고, 그 결과 전적으로 일본 내 조력자들의 호의에 의지해 동아동문서원에 설치된 베트남 학생들만을 위한 특별반에 만족해야 했다. 따라서 대부분의 베트남 학생들은 일본에서 공부했지만 실제로는 고립된 상태에서 외부세계를 경험할 수 없었고, 그렇다 하더라도 당시의 혁명적 사상을 이해하거나 수용하기에는 부족한 나이였다. 요컨대 동유운동의 실패는 그 기간이 짧았기 때문만이 아니라 그 짧은 기간 내에서도 교육의 질적 수준이 낮았다는 데에서도 그 원인을 찾을 수 있다. 일본에 유학했던 베트남 학생들의 전체 명단은 현재 실종된 것으로 보이며 다만 산발적인 정보를 종합하여 약 20여 명에 관한 성명과 간단한 정보를 파악할 수 있었다. 이 정보와 더불어 추후 더 많은 기록이 발굴된다면 베트남 현대사에서 그들의 이름이 등장하는지 다시 한 번 확인하고 재평가할 수 있을 것이다.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.2
• /
• pp.59-87
• /
• 2012

Recent studies reveal that eclogite formed in the Hongseong area and post collision igneous rocks occurred throughout the Gyeonggi Massif during the Triassic Songrim Orogeny. These new findings derive the tectonic model in which the Triassic Qinling-Dabie-Sulu collision belt between the North and South China blocks extends into the Hongseong-Yangpyeong-Odesan collision belt in Korea. The belt may be further extended into the late Paleozoic subduction complex in the Yanji belt in North Korea through the Paleozoic subduction complex in the inner part of SW Japan. The collision belt divides the Gyeonggi Massif into two parts; the northern and southern parts can be correlated to the North and South China blocks, respectively. The collision had started from Korea at ca. 250 Ma and propagated to China. The collision completed during late Triassic. The metamorphic conditions systematically change along the collision belt:. ultrahigh temperature metamorphism occurred in the Odesan area at 245-230Ma, high-pressure metamorphism in the Hongseong area at 230 Ma and ultra high-pressure metamorphism in the Dabie and Sulu belts. This systematic change may be due to the increase in the depth of slab break-off towards west, which might be related to the increase of the amounts of subducted ocecnic slab towards west. The wide distribution of Permo-Triassic arc-related granitoids in the Yeongnam Massif and in the southern part of the South China block indicate the Permo-Triassic subduction along the southern boundary of the South China block which may be caused by the Permo-Triassic collision between the North and South China blocks. These studies suggest that the Songrim orogeny constructed the Korean Peninsula by continent collision and caused the subduction along the southern margin of the Yeongnam Massif. Both the northern and southern Gyeonggi Massifs had undergone 1870-1840 Ma igneous and metamorphic activities due to continent collision and subduction related to the amalgamation of Colombia Supercontinent. The Okcheon metamorphic belt can be correlated to the Nanhua rift formed at 760 Ma within the South China blocks. In that case, the southern Gyeonggi Massif and Yeongnam Massif can be correlated to the Yangtz and Cathaysia blocks in the South China block, respectively. Recently possible Devonian or late Paleozoic sediments are recognized within the Gyeonggi Massif by finding of Silurian and Devonian detrital zircons. Together with the Devonian metamorphism in the Hongseong and Kwangcheon areas, the possible middle Paleozoic sediments indicate an active tectonic activity within the Gyeonggi Massif during middle Paleozoic before the Permo-Triassic collision.

• The Journal of Korean Academy of Sensory Integration
• /
• v.17 no.3
• /
• pp.14-25
• /
• 2019

Objective : This study aims to verify the content validity and inter-rater reliability of the Korean version of the Peabody Developmental Motor Scale 2 (PDMS-2) and to identify the concurrent validity by comparing it with the Korean version of the Bruininks-Oseretsky Test of Motor Proficiency-2 (BOT-2). Methods : PDMS-2 was translated by the researcher and an eighth-year clinical occupational therapist. The content consistency of the Korean version of the PDMS-2 was verified by three professors with experience using it. After the verification of the content consistency of the PDMS-2 by the five clinical occupational therapists and the additional revision, the Korean version of the PDMS-2 was completed. The researcher and another occupational therapist evaluated the Korean version of PDMS-2 in 50 children and measured the inter-rater reliability. Concurrent validity was measured by comparing the results of the Korean version of PDMS-2 and Korean version of BOT-2. Results : The content consistency test showed overall agreement of mean 3.45, and the content understanding test showed a high level of understanding of mean 3.69. The inter-rater reliability and concurrent validity of the Korean version of the PDMS-2 showed a statistically significant correlation. Conclusion : The Korean version of the PDMS-2 showed high content understanding, reliability, and validity. It can assist clinicians and researchers who work in fields related to child treatment or development.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.05a
• /
• pp.109-114
• /
• 2002

현재 게임시장에서는 사용자가 직접 게임을 체험하는 체감형 게임기가 활발히 개발되고 있다. 대다수의 제품들은 운동을 재현하기 위하여 6개의 축으로 이루어진 Stewart 형의 모션 플랫폼을 사용하고 있다. 본 연구개발에서 시도되고 있는 게임기는 모션이 가미된 콘솔형 아케이드 시뮬레이션 게임기에 해당되는데, 인간의 감성인자중 운동감성에 바탕을 둔 운동 재현을 고려하여 워시아웃(Washout) 알고리즘을 적용하였고, 일반적으로 6개의 축으로 구현하는 운동 자유도를 짐발(Gimbal)형으로 재현하고자 하였다. 또한 실시간 스케줄러와 H/W 입출력 및 통신 드라이버에 대한 개발을 수행하였으며, 게임용 실시간 시뮬레이션에 적합한 정확도와 실시간성을 유지하도록 롤러코스터 상에서 이루어지는 차량운동이 모델링 되었다. 특히, 연구사례를 찾기 어려운 짐발형 운동판에 대한 워시아웃 필터를 시뮬레이터 탑승자의 감성공학적 특성을 반영할 수 있도록 설계하였다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2016.11a
• /
• pp.188-189
• /
• 2016

본 논문은 초기하중을 하중을 받는 역대칭 angle-ply 와 cross-ply 적층판의 좌굴 및 진동특성을 무재하시의 고유진동수를 이용하여 산정하는 간편법을 제시하였다. 마주보는 두변이 단순 지지된 역대칭 적층판의 운동방정식은 전단변형과 회전강성효과를 고려한 YSN 이론으로 유도하였으며 이를 선점법을 이용하여 해석하였다. 초기응력을 받는 적층판의 무차원화 고유진동수, 임계좌굴계수 및 동적 주 불안정영역 문제들을 무재하시의 무차원화 고유진동수로서 각각의 특성을 정립시켰다. 본 연구에서 제안한 진동특성에 관한 간편산정식의 정당성과 사용성을 입증하기 위하여 수치예들로서 검토하였다.

• Clinics in Shoulder and Elbow
• /
• v.15 no.2
• /
• pp.117-122
• /
• 2012

Purpose: To assess the effectiveness of internal fixation using a precontoured locking compression plate for the treatment of the displaced clavicle fracture by analyzing both radiological and clinical outcomes. Materials and Methods: We reviewed 34 cases of displaced clavicle shaft fracture treated by internal fixation using precontoured locking compression plates between May 2009 and February 2010. Radiological outcomes were analized on the basis of bone union and the differences between the time for bone union depending on sex and age. Clinical outcomes were analyzed on the basis of quick DASH Scores and the differences in the range of motion of the affected shoulder compared to the contralateral shoulder. Results: In the radiological evaluation, all fractures showed bone union, and the average time for bone union was 12.3 weeks, without delayed unions. Time for bone union did not differ significantly with respect to sex and age (p=0.87). In the clinical evaluation, the average final quick DASH Score was 23.5 (range, 12~42). At final follow up, the range of motion after bone union in the affected shoulder was not significantly different from that of the contralateral shoulder (p=0.69). Conclusion: The internal fixation achieved using precontoured locking compression plate in displaced clavicle shaft fracture showed effective bone union and can be considered as a reliable method with fine clinical results showing early range of motion at the shoulder joint.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.47-55
• /
• 2011

The purpose of this study was to determine the legibility distance for traffic road sign and traffic sign, fixation duration and number of fixation during the time of recognition of traffic road signs under different vision conditions. This experiment was conducted on a closed-road circuit which has realistic driving road and environment Each participant drove the real vehicle for the experiment and specially built traffic road sign for the experiment and traffic road signs on the side of closed-road circuit were used. Different vision conditions were simulated using spectacle lenses to reach visual acuity 1.0 and 0.8 and it was 1.2 without spectacles and each participant tested under 3 vision conditions.. The result of this study demonstrated that there was a significant difference on legibility distance between visual acuity of 1.2 and 0.8 and there were also significant difference on fixation duration and number of fixations with smaller traffic signs. This study demonstrated the importance of vision correction for driving at night-time, also showed there would be difference on legibility distance and efficiency of eye movement such as fixation duration and number of fixation despite of satisfied visual acuity for driver's license requirement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.591-596
• /
• 2016

Numerical analyses were performed on the heat flow characteristics of a heat transfer plate with six different shapes (basic, rectangle, triangle, wave type) to reduce the level of white smoke at a stack. In this study, to examine the heat transfer performance (heat transfer capacity, pressure drop, turbulence kinetic energy, heat transfer coefficient) on the heat transfer plates, simulations were conducted using the commercial computational fluid dynamics software, ANSYS CFX Ver.14 under uniform flow conditions. The thermal flow phenomenon in a channel with six heat transfer plates could be predicted adequately under uniform flow conditions. The heat transfer capacity, pressure drop, turbulence kinetic energy, and heat transfer coefficient were affected by the flow rate, aspect ratio and plate shape. These results provide guidelines to design an effective heat exchanger with the wave type to reduce white smoke.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.188-193
• /
• 2003

To predict changes in biomechanical parameters such as intradiscal pressure, and the shock absorbing mechanism in the spinal motion segment under different impact duration/loading rates, a three dimensional L3/L4 motion segment finite element model was modified to incorporate the poroelastic properties of the motion segment. The results were analyzed under variable impact duration for normal and degenerated discs. For short impact duration and a given maximum compressive force, relatively high cancellous pore pressure was generated as compared with a case of long impact duration, although the amount of impulse was increased. In contrast relatively constant pore pressure was generated in the nucleus. Disc degeneration increased pore pressure in the disc and decreased pore pressure in the cancellous core, which is more vulnerable to compressive fracture compared with intact case.