• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.4
• /
• pp.373-383
• /
• 2001

This study conducted pilot mapping project to know the possibility of mapping with medium resolution satellite imageries. For this purpose, mapping experiments were conducted with each stereo model imageries of SPOT, KOMPSAT, and IRS- lC. And positional accuracy, analysis of detectable and describable features, and comparison with existing digital map were checked, possible mapping scale and cost analysis were conducted with these results. Regarding SPOT imagery, digital photogrammetric workstation was used for stereoplotting. Regarding KOMPSAT and IRS-lC imageries, because there were data format support problems. head-up digitizing was performed with ortho imageries rectified with DEMs generated by image matching. The results of experiments show that such features as wide road, river, coast line, etc are possible to detect and depict but many other features are not for SPOT, KOMPSAT, and IRS-lC imageries. On the aspect of mapping, therefore, SPOT is available for 1/50,000 topographic map revision, KOMPSAT and IRS-lC for 1/25.000 topographic map revision.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.589-592
• /
• 2000

자동차 man-machine system의 interface를 이루는 Display panel, Center fascia, Steering wheel, Rear view, Gear, Power window switch, Seat 등과 이들의 Layout은 운전자의 안전뿐만 아니라, 안락감과 밀접한 부분으로 알려져 있다. 따라서 이러한 설계요소들의 Man-machine interface의 최적화를 위한 인간공학적 접근이 필요하다. 운전자의 안락감은 Seat, Pedal, Steering wheel 등 뿐만 아니라 각종 조작장치(Audio, Switch, Gear,…)도 함께 연구되어야 하다. 따라서, 본 연구에서는 실험용 Seating buck을 제작하여 실내 조작장치 중 오디오를 대상으로 터치스크린과 Rapid Prototype을 이용해 사용성 평가에 대한 적합성을 검증하고자 하였다. Rapid Prototyping 기법은 디자인단계에서 제품 사용상의 문제점을 발견 개선할 수 있다는 장점이 있다. 그러나, 본 연구 결과에서 3가지 항목 중 1가지만이 실제 Audio와 Prototype에서 차이가 없었다. 따라서, Prototype의 접촉감과 입체감의 개선, 실사용과 동일한 환경의 제시, 소리와 같은 정확한 반응의 제시, Glare의 제거, 사용자 분석에 따른 실험 데이터의 축적 등을 고려하여 Rapid Prototyping을 구현하여야 할 것이다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.177-183
• /
• 2003

We tried to design and manufacture an iris photographing optical-system which is used in the Oriental medicine or medical diagnostics. The whole system consists of a light source part, an image focusing part, a CCD transfer part and a diagnosis S/W. We designed the image focusing part to the reduction optical-system with 0.58X magnification of which the chromatic aberration is removed by using materials of FD60 and BACD5. The image focusing part's localization did big contribution in coot reduction of products. The manufactured iris photographing optical-system had superior performance in aspect that has stereoscopic effects of images in comparison with the foreigner's.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.31-32
• /
• 2006

본 논문은 중형엔진 조립과정에서 실린더 프레임 회전 작업에 사용하는 지그의 구조해석을 수행한 후, 지그의 안전성을 검토하고 지그의 경량화를 통하여 실용적인 지그 설계안을 제안하였다. 현장 작업자가 들 수 있는 최대 무게를 넘는 지그를 구조해석 모델로 선정한 후, 해석모델은 지그, 실린더 프레임, 볼트, 너트, 샤클 핀을 3차원 입체요소로 구성하고 ABAQUS/Standard를 사용하여 재료 비선형 및 접촉을 고려한 구조해석을 수행하였다. 구조최적화를 위하여 응력이 상대적으로 낮은 부위와 작업성을 고려하여 설계변수를 선정하고, 실험계획법의 직교배열표를 활용하여 설계변수에 대한 각 부위의 민감도와 경량화 모델을 도출하였다.

• Annual Conference of KIPS
• /
• 2000.10a
• /
• pp.727-730
• /
• 2000

본 논문에서는 보다 인간중심의 사용자 인터페이스를 제공하는 테이블형 가상현실 장치와 이에 적합한 직관적 상호작용 형태를 소개하고, 이러한 상호작용 기법을 이용한 의료교육용 응용시스템을 설계, 구현하였다. 본 교육 시스템은 테이블형 가상현실 장치를 사용함으로써 다수의 참여자에 대한 공동 교육을 용이하게 하고, 인터랙션 장치간 케이블 연결을 최소화한 비디오 기반 트랙킹을 통해 자유로운 사용자 인터랙션을 제공하였다. 또한, 해드 트랙킹을 기반으로 하여 주 관찰자의 시점으로 변화하는 동적, 입체 영상 가시화에 의한 증진된 몰입감을 제공함으로써, 교육의 효과를 높이도록 하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.399-404
• /
• 2002

In this study, it was intended to present solution for learners to understand and utilize photogrammetry more easily using economic medium except expensive measuring equipment. For this, 3D point data was analysed by generating event to stereo image on monitor, and input to CAD system automatically. so, real time vector editing and drawing with coordinates measurement were possible. The system was verified, and the monitoring for real construction was performed. so, it is expected to be utilized as a practical use software in related fields.

• Proceedings of The KACE
• /
• 2018.01a
• /
• pp.165-167
• /
• 2018

최근 급속히 발전하고 있는 콘텐츠 제작 기술을 활용하여 가상현실 콘텐츠를 제작하고 학습 도구로 활용하는 사례가 증가하고 있다. 학습 자료로써 사진이나 동영상과 같은 정적인 콘텐츠의 의존에서 벗어나, 상호작용적인 가상현실 콘텐츠를 학습에 활용하는 연구의 중요도가 높아지고 있다. 학습자가 기상 현상과 같이 입체적이고도 동적으로 변화하는 소재를 가상현실에서 능동적으로 체험한다면, 학습효과가 높아질 것으로 예상한다. 최신 실시간 컴퓨터 그래픽스 기술과 그래픽스 하드웨어는 기상 현상을 사실적으로 재현할 수 있는 수준으로 이미 발전해 있다. 이러한 최신 기술이 컴퓨터를 활용한 기상학 교육에서 활용할 수 있다. 본 연구에서는 실시간 볼륨 구름 시뮬레이션을 구현하여 상용 게임 엔진에 탑재하고, 이를 기반으로 기상학 학습용 가상현실 콘텐츠를 제작하는 방법에 대해서 논한다.

• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.335-343
• /
• 2012

Intensity-modulated radiotherapy(IMRT) have the ability to provide better dose conformity and sparing of critical normal tissues than three-dimensional radiotherapy(3DCRT). Especially, with the benefit of health insurance in 2011, its use now increasingly in many modern radiotherapy departments. Also the use of linear accelerator with high-energy photon beams over 10 MV is increasing. As is well known, these linacs have the capacity to produce photonueutrons due to photonuclear reactions in materials with a large atomic number such as the target, flattening filters, collimators, and multi-leaf collimators(MLC). MLC-based IMRT treatments increase the monitor units and the probability of production of photoneutrons from photon-induced nuclear reactions. The purpose of this study is to quantitatively evaluate the dose of photoneutrons produced from 3DCRT and IMRT technique for Rando phantom in cervical cancer. We performed the treatment plans with 3DCRT and IMRT technique using Rando phantom for treatment of cervical cancer. An Rando phantom placed on the couch in the supine position was irradiated using 15 MV photon beams. Optically stimulated luminescence dosimeters(OSLD) were attached to 4 different locations (abdomen, chest, head and neck, eyes) and from center of field size and measured 5 times each of locations. Measured neutron dose from IMRT technique increased by 9.0, 8.6, 8.8, and 14 times than 3DCRT technique for abdomen, chest, head and neck, and eyes, respectively. When using IMRT with 15 MV photonbeams, the photoneutrons contributed a significant portion on out-of-field. It is difficult to prevent high energy photon beams to produce the phtoneutrons due to physical properties, if necessary, It is difficult to prevent high energy photon beams to produce the phtoneutrons due to physical properties, if necessary, it is need to provide the additional safe shielding on a linear accelerator and should therefore reduce the out-of-field dose.

• Archives of design research
• /
• no.16
• /
• pp.237-252
• /
• 1996

Study of new materials, which has been going on in many fields of modem art since the beginning of this century, has cintributed much to the development of modem art. In this regard, it is noteworthy that many in the field of fiber art have experimented with non-traditional, indusrial materials with some notable success. Industrial materials represent the world of thechnology we live in and help us form the kind of view on art that is reflective of the present age and its social milieu. Industrial materials, when used as media for art, also present us with new concepts and possibilities for artistic expression. In fiber art, the use of industrial materials has greatly expanded the very idea of 'fiber', effectively ferring the imagination of fiber aetists to experiment with diverse materials and new mathodology. Overcoming the traditional constraints of technique-orienthd their discipline, fiber artists began to pay more attention to matiere or the material jtself and the infinite variety of surface, color and texture that it promises. And informed by this newly discovered aesthetice of the material. fiber artists began in eamest to expand the area of their artistic expression, producing multi-dimensional works, conquering space and experimentiong with hugc environmantal works.

• Radiation Oncology Journal
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2000

Purpose : Although using the high energy Photon beam with conventional Parallel-opposed beams radiotherapy for nasopharyngeal carcinoma, radiation-induced xerostomia is a troublesome problem for patients. We conducted this study to explore a new parotid gland sparing technique in 3-D conformal radiotherapy (3-D CRT) in an effort to prevent the radiation-induced xerostomia. Materials and Methods : We peformed three different planning for four clinically node-negative nasopharyngeal cancer patients with different location of tumor(intracranial extension, nasal cavity extension, oropharyngeal extension, parapharyngeal extension), and intercompared the plans. Total prescription dose was 70.2 Gy to the isocenter. For plan-A, 2-D parallel opposing fields, a conventional radiotherapy technique, were employed. For plan-B, 2-D parallel opposing fields were used up until 54 Gy and afterwards 3-D non-coplanar beams were used. For plan-C, the new technique, 54 Gy was delivered by 3-D conformal 3-port beams (AP and both lateral ports with wedge compensator; shielding both superficial lobes of parotid glands at the AP beam using BEV) from the beginning of the treatment and early spinal cord block (at 36 Gy) was peformed. And bilateral posterior necks were treated with electron after 36 Gy. After 54 Gy, non-coplanar beams were used for cone-down plan. We intercompared dose statistics (Dmax, Dmin, Dmean, D95, DO5, V95, VOS, Volume receiving 46 Gy) and dose volume histograms (DVH) of tumor and normal tissues and NTCP values of parotid glands for the above three plans. Results : For all patients, the new technique (plan-C) was comparable or superior to the other plans in target volume isodose distribution and dose statistics and it has more homogenous target volume coverage. The new technique was most superior to the other plans in parotid glands sparing (volume receiving 46 Gy: 100, 98, 69$\%$ for each plan-A, B and C). And it showed the lowest NTCP value of parotid glands in all patients (range of NTCP; 96$\~$100$\%$, 79$\~$99$\%$, 51$\~$72$\%$ for each plan-A, B and C). Conclusion : We conclude that the new technique employing 3-D conformal radiotherapy at the beginning of radiotherapy and cone down using non-coplanar beams with early spinal cord block is highly recommended to spare parotid glands for node-negative nasopharygeal cancer patients.