• The Korean Journal of Malacology
• /
• v.20 no.2
• /
• pp.111-120
• /
• 2004

We investigated the reproductive cycle of Corbicula japonica with its gonadal development by histological observations, and the seasonal changes in biochemical mass and foot muscle of the adductor muscle, visceral mass and foot muscle of the clam by biochemical analysis, from January to December, 2003. The reproductive cycle of this species can be classified into five successive stages: early active stage (February to April), late active stage (April to July), ripe stage (June to August), partially spawned stage (July to September) and spent/inactive stage (September to March). According to ANOVA test, there were significant differences (p < 0.05) in total protein, total lipid and glycogen contents among months for all of the visceral mass, adductor muscle and foot muscle. Total protein content was highest in adductor muscle, while lowest in visceral mass. There was no correlation in total protein content between visceral mass and adductor muscle (p = 0.208). However, strong positive correlation was found between adductor muscle and foot muscle (r = 0.769, p < 0.001). In visceral mass, total lipid content was the highest; it was 2 or 3-fold higher than in adductor muscle or foot muscle. The monthly change was also most dynamic in visceral mass. It decreased from January to March (early active stage), and reached maximum in April (late active stage). From May to August (ripe and partially spawned stage), it dradually decreased and then increased again until October (spent/inactive stage). Multiple comparisons showed that total lipid content in visceral mass between all of the adjacent two months was significaltly different (p < 0.05). There were strong negative correlations in total lipid content between visceral mass and adductor muscle (r = 0.687, p < 0.001), and between visceral mass and foot muscle (r = 0.473, p = 0.008). Changes of glycogen content were more or less similar to the changes of lipid contents in visceral mass, adductor muscle and foot muscle, except for April. In April, glycogen content in visceral mass was over four times higher than that in adductor muscle or foot muscle. There was a positive correlation in glycogen content between adductor muscle and foot muscle (r = 0.686, p < 0.001). Especially, total lipid content showed a negative correlation between the adductor muscle and visceral mass. Therefore, these results indicate that the nutrient content of the adductor muscle, visceral muscle and foot muscle changed in response to gonadal energy needs.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.233-241
• /
• 2014

The aim of this study is to develop a new software tool for 3D dose verification using $PRESAGE^{REU}$ Gel dosimeter. The tool included following functions: importing 3D doses from treatment planning systems (TPS), importing 3D optical density (OD), converting ODs to doses, 3D registration between two volumetric data by translational and rotational transformations, and evaluation with 3D gamma index. To acquire correlation between ODs and doses, CT images of a $PRESAGE^{REU}$ Gel with cylindrical shape was acquired, and a volumetric modulated arc therapy (VMAT) plan was designed to give radiation doses from 1 Gy to 6 Gy to six disk-shaped virtual targets along z-axis. After the VMAT plan was delivered to the targets, 3D OD data were reconstructed from 512 projection data from $Vista^{TM}$ optical CT scanner (Modus Medical Devices Inc, Canada) per every 2 hours after irradiation. A curve for converting ODs to doses was derived by comparing TPS dose profile to OD profile along z-axis, and the 3D OD data were converted to the absorbed doses using the curve. Supra-linearity was observed between doses and ODs, and the ODs were decayed about 60% per 24 hours depending on their magnitudes. Measured doses from the $PRESAGE^{REU}$ Gel were well agreed with the TPS doses at central region, but large under-doses were observed at peripheral region at the cylindrical geometry. Gamma passing rate for 3D doses was 70.36% under the gamma criteria of 3% of dose difference and 3 mm of distance to agreement. The low passing rate was resulted from the mismatching of the refractive index between the PRESAGE gel and oil bath in the optical CT scanner. In conclusion, the developed software was useful for 3D dose verification from PRESAGE gel dosimetry, but further improvement of the Gel dosimetry system were required.

• Journal of Korean Society of Archives and Records Management
• /
• v.10 no.2
• /
• pp.75-99
• /
• 2010

Digital resources are widely used in our modern society. However, we are facing fundamental problems to maintain and preserve digital resources over time. Several standard methods for preserving digital resources have been developed and are in use. It is widely recognized that metadata is one of the most important components for digital archiving and preservation. There are many metadata standards for archiving and preservation of digital resources, where each standard has its own feature in accordance with its primary application. This means that each schema has to be appropriately selected and tailored in accordance with a particular application. And, in some cases, those schemas are combined in a larger frame work and container metadata such as the DCMI application framework and METS. There are many metadata standards for archives of digital resources. We used the following metadata standards in this study for the feature analysis me metadata standards - AGLS Metadata which is defined to improve search of both digital resources and non-digital resources, ISAD(G) which is a commonly used standard for archives, EAD which is well used for digital archives, OAIS which defines a metadata framework for preserving digital objects, and PREMIS which is designed primarily for preservation of digital resources. In addition, we extracted attributes from the decision tree defined for digital preservation process by Digital Preservation Coalition (DPC) and compared the set of attributes with these metadata standards. This paper shows the features of these metadata standards obtained through the feature analysis based on the records lifecycle model. The features are shown in a single frame work which makes it easy to relate the tasks in the lifecycle to metadata elements of these standards. As a result of the detailed analysis of the metadata elements, we clarified the features of the standards from the viewpoint of relationships between the elements and the lifecycle stages. Mapping between metadata schemas is often required in the long-term preservation process because different schemes are used in the records lifecycle. Therefore, it is crucial to build a unified framework to enhance interoperability of these schemes. This study presents a basis for the interoperability of different metadata schemas used in digital archiving and preservation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.6-15
• /
• 2009

In this paper, a new 4-way search window is designed for the high-performance 2D PE architecture in H.264 Motion Estimation(ME) to improve the memory bandwidth. While existing 2D PE architectures reuse the overlapped data of adjacent search windows scanned in 1 or 3-way, the new window utilizes the overlapped data of adjacent search windows as well as adjacent multiple scanning (window) paths to enhance the reusage of retrieved search window data. In order to scan adjacent windows and multiple paths instead of single raster and zigzag scanning of adjacent windows, bidirectional row and column window scanning results in the 4-way(up. down, left, right) search window. The proposed 4-way search window could improve the reuse of overlapped window data to reduce the redundancy access factor by 3.1, though the 1/3-way search window redundantly requires $7.7{\sim}11$ times of data retrieval. Thus, the new 4-way search window scheme enhances the memory bandwidth by $70{\sim}58%$ compared with 1/3-way search window. The 2D PE architecture in H.264 ME for 4-way search window consists of $16{\times}16$ pe array. computing the absolute difference between current and reference frames, and $5{\times}16$ reusage array, storing the overlapped data of adjacent search windows and multiple scanning paths. The reference data could be loaded upward and downward into the new 2D PE depending on scanning direction, and the reusage array is combined with the pe array rotating left as well as right to utilize the overlapped data of adjacent multiple scan paths. In experiments, the new implementation of 4-way search window on Magnachip 0.18um could deal with the HD($1280{\times}720$) video of 1 reference frame, $48{\times}48$ search area and $16{\times}16$ macroblock by 30fps at 149.25MHz.

• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.47-51
• /
• 2008

Objective: This study analyzed errors due to rotation or tilt of the magnetic resonance (MR) imaging indicator during image acquisition for a stereotactic radiosurgery. The error correction procedure of a commercially available stereotactic neurosurgery treatment planning program has been verified. Materials and Methods: Software virtual phantoms were built with stereotactic images generated by a commercial programming language, Interactive Data Language (version 5.5). The thickness of an image slice was 0.5 mm, pixel size was $0.5{\times}0.5mm$, field of view was 256 mm, and image resolution was $512{\times}512$. The images were generated under the DICOM 3.0 standard in order to be used with Leksell GammaPlan$^{(R)}$. For the verification of the rotation error correction function of Leksell GammaPlan$^{(R)}$, 45 measurement points were arranged in five axial planes. On each axial plane, there were nine measurement points along a square of length 100 mm. The center of the square was located on the z-axis and a measurement point was on the z-axis, too. Five axial planes were placed at z=-50.0, -30.0, 0.0, 30.0, 50.0 mm, respectively. The virtual phantom was rotated by $3^{\circ}$ around one of x, y, and z-axis. It was also rotated by $3^{\circ}$ around two axes of x, y, and z-axis, and rotated by $3^{\circ}$ along all three axes. The errors in the position of rotated measurement points were measured with Leksell GammaPlan$^{(R)}$ and the correction function was verified. Results: The image registration errors of the virtual phantom images was $0.1{\pm}0.1mm$ and it was within the requirement of stereotactic images. The maximum theoretical errors in position of measurement points were 2.6 mm for a rotation around one axis, 3.7 mm for a rotation around two axes, and 4.5 mm for a rotation around three axes. The measured errors in position was $0.1{\pm}0.1mm$ for a rotation around single axis, $0.2{\pm}0.2mm$ for double and triple axes. These small errors verified that the rotation error correction function of Leksell GammaPlan$^{(R)}$ is working fine. Conclusion: A virtual phantom was built to verify software functions of stereotactic neurosurgery treatment planning program. The error correction function of a commercial treatment planning program worked within nominal error range. The virtual phantom of this study can be applied in many other fields to verify various functions of treatment planning programs.

• Journal of The Korean Association For Science Education
• /
• v.30 no.6
• /
• pp.870-885
• /
• 2010

The purposes of this study are to examine what the participants experienced when developing Content Representation (CoRe) of "molecular motion" for the 7th grade in collaboration with experienced chemistry-trained teacher and non-chemistry-trained teacher and to investigate how the participants' PCK changed in their classes after developing CoRe. The participants were one experienced chemistry-trained teacher, two physics-trained teachers, and one researcher. The participants were selected by purposeful sampling. For this study, the discussions on developing CoRe was recorded and two physics-trained participants' classes were video-taped, and constructed/semiconstructed interviews were conducted. All data were transcribed for analysis. The participants experienced reflective thinking of their knowledge and previous classes, corrected their own misconception and clarified those conception, recognized the contents and the goals of "molecular motion" class, enhanced understanding of students' preconception during the development of CoRe. Especially, the two physics-trained teacher-participants confessed that they recognized clearly the contents and the goals of "molecular motion" class and identified their deficiency in 'particle viewpoint' in their previous classes. Their recognition was realized in the course of interaction with experienced chemistry-trained teacher. Among the components of PCK, knowledge of science curriculum was most influent on two physics-trained teacher-participants' classes, and they emphasized 'particle viewpoint' and 'molecular motion' in their classes. In addition, they introduced new teaching strategies that were discussed in the course of developing CoRe. The influence on the participants' PCK was different according to their reflective thinking on their own knowledge and previous classes and their affective characteristic. The implication of this study is that, the course of developing CoRe can promote reflective thinking that is essential for increasing teachers' professionalism and significantly influence on PCK. Especially, developing CoRe in collaboration with experienced chemistry-trained teacher and non-chemistry-trained teacher can identify deficiency in their classes and thereby, improve their classes. And, it takes time and effort to internalize the participant's recognition in their teaching practice.

• Korea journal of population studies
• /
• v.20 no.2
• /
• pp.181-198
• /
• 1997

Going beyond the previous formulations of development theories, the present paper explores the effects other than political economy on quality of life in a rapidly developing country. The major analysis takes up the historical trend and nature of the developmental transformation that is partially a consequences of state structures and partially autonomous form it in South Korea. Also, it diagnoses developmental pathways for the future track by constructing a baseline model for state transition on the basis of power game between the state and civil society in the country. The results of the historical analysis show that civil society has been transformed in the course of confrontations and interactions between the state and nationalist social movement. The distinction between developmental(or bureaucratic authoritarian) and democratic state is presented to show that these are two qualitatively different aspects of state of state power, requiring separate analytical treatment. Furthermore, the state-centric approach which emphasizes the active role of the state at the sacrifice of societal fabric-constraining social conditions for quality of life - appears to be modified. On the contrary, the impact of civil society is transmitted both directly and indirectly via labor and ecological movement for quality of life, which is critical to the formation of the welfare state in the country. The prospect for sustainable development in Korea lies in providng and expanding quality of life in terms of the financial feasibility of the state through the public-private cooperation, and abstaining from drastic and radical commitment to welfare services as is the case with the European declines in welfare state, Further studies are needed to examine the interrelationships in different historical and cultural settings of developing counties to estimate a theory of quality of life and social justice.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.66-72
• /
• 2009

The detection methods are required to monitor and diagnose the abnormality on the insulation condition inside a gas-insulated switchgear (GIS). Due to a good sensitivity to the products decomposed by partial discharges (PDs) in $SF_6$ gas, the development of a SWNT gas sensor is actively in progress. However, a few numerical studies on the diffusion mechanism of the $SF_6$ decomposition products by PD have been reported. In this study, we modeled $SF_6$ decomposition process in a chamber by calculating temperature, pressure and concentration of the decomposition products by using a commercial CFD program in conjunction with experimental data. It was assumed that the mass production rate and the generation temperature of the decomposition products were $5.04{\times}10^{-10}$ [g/s] and over 773 K respectively. To calculate the concentration equation, the Schmidt number was specified to get the diffusion coefficient functioned by viscosity and density of $SF_6$ gas instead rather than setting it directly. The results showed that the drive potential is governed mainly by the gradient of the decomposition concentration. A lower concentration of the decomposition products was observed as the sensors were placed more away from the discharge region. Also, the concentration increased by increasing the discharge time. By installing multiple sensors the location of PD is expected to be identified by monitoring the response time of the sensors, and the information should be very useful for the diagnosis and maintenance of GIS.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.40-53
• /
• 2017

The purpose of this study was to evaluate the effects of container types on physiological characteristics of Zelkova serrata, Fraxinus rhynchophylla and Quercus serrata in the container nursery stage. We used 16 container types [4 growing densities (100, 144, 196 and $256\;seedlings/m^2$)${\times}4$ cavity volumes (460, 380, 300 and $220cm^3/cavity$)] and performed two-way ANOVA to test the differences in photosynthesis, photochemical efficiency and chlorophyll content among container types. Also, multiple regression analysis was conducted to correlate container dimensions with photosynthetic rate. Container types had a strong influence on photosynthesis of three species seedlings. Growing densities and cavity volumes had a significant interaction effect on photosynthetic rate, water use efficiency, stomatal conductance and chlorophyll contents except stomatal conductance of Q. serrata. In all three species, however, interactions between the two factors of container type were not found with regard to photochemical efficiency. Growing density was negatively correlated with photosynthetic rate of F rhynchophylla and Q. serrata, while cavity volumes positively affected on those of three species seedlings. The range of optimal container types was determined by multiple regression analysis based on photosynthetic rate. Consequently, optimal growing density and cavity volume of container by each tree species were found to be approximately $160{\sim}210\;seedlings/m^2$ and $430{\sim}460cm^3/cavity$ for Z. serrata, $130{\sim}150\;seedlings/m^2$ and $390{\sim}440cm^3/cavity$ for F. rhynchophylla and $130{\sim}170\;seedlings/m2$ and $420{\sim}460cm^3/cavity$ for Q. serrata, respectively. Application of adequate container will induce higher quality seedling production in nursery stage, which will also increase seedling growth in plantation stage.

• The Korean Journal of Air & Space Law and Policy
• /
• v.21 no.2
• /
• pp.71-96
• /
• 2006

This paper intends to describe the carrier's duty for the delivery of international air cargo and the carrier's liability for the illegal delivery of cargo under the Montreal Convention, lATA Conditions of Carriage for Cargo and judicial precedents. Under the Article 13 of Montreal Convention, the consignee is entitled, on arrival of the cargo at the place of destination, to require the carrier to deliver the cargo to it, on payment of the charge due and on complying with the conditions of carriage. And unless it is otherwise agreed, it is the duty of the carrier to give notice to the consignee as soon as the cargo arrives. Under the Article 18 of Montreal Convention, the carrier is liable for damage sustained in the event of the destruction or less of or damage to, cargo upon condition only that the event which caused the damage so sustained took place during the carriage by air. And the carriage by air comprises by the period during which the cargo is in the carriage of the carrier. Under the Article 11 of lATA Conditions of Carriage for Cargo, carrier is liable to shipper, consignee of any other person for damage sustained in the event of destruction of loss of, or damage to, or delay in the carriage of cargo only if the occurrence which caused to the damage so sustained took place during the carriage as defined under Article 1. According to the precedent of Korean Supreme Court sentenced on 22 July 2004, the freight forwarder as carrier was not liable for the illegal delivery of cargo to the notify party (actual importer) on the airway bill by the bonded warehouse operator because the freight forwarder did not designate the bonded warehouse and did not hold the position of employer to the bonded warehouse operator. In conclusion, the carrier or freight forwarder should pay always attention the movement and condition of the cargo not to be liable for the illegal delivery of cargo.