• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.58-64
• /
• 2003

With the 1 ton/day-class entrained-bed gasification system, heavy residual oil from local refinery was gasified at the operating conditions of 1,000~1,20$0^{\circ}C$ and 3 $kg_f$/$\textrm{cm}^2$ in order to determine the variation of syngas composition, carbon conversion, and cold gas efficiency. Produced syngas consists of mainly CO, H$_2$, $CO_2$, and the methane concentrations. Results yielded a maximum syngas composition of 45% H$_2$ and 26%, CO at the 31 kg/hr feeding condition. The maximum carbon conversion and cold gas efficiency were 87% and 68%, respectively at the feeding conditions of 20 kg/hr and oxygen/feed ratio of 1.2. When oxygen feeding amount that is one of the most important operating parameter in gasification was increased, concentration of hydrogen in the syngas is greatly increased comparing to the concentration of CO and $CO_2$. The temperature exhibited about 11$0^{\circ}C$ raise while oxygen/feed ratio changed from 0.6 to 1.2. Methane concentration showed enhanced dropping rate with increase in gasifier temperature and the useful relationship between the gasifier temperature and methane concentration existed such that it can be employed as an indirect measure of inside gasifier temperature.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.32-42
• /
• 1995

Cultivation using rain shelter is very popular in summer because rain shelter has a simple structure using less materials than any other regular greenhouse. Although it has a main advantage of easy construction in terms of labour, time and cost, it has some disadvantage of poor ventilation and rain fall inflow. Therefore, the rain shelters being able to overcome the problems, to some extent, are necessary to propagate for practical purpose. Three characteristic types of rain shelter were analyzed using measured and simulated environment data. Type 1 was a conventional type with an arched roof, and Type 2 and Type 3 were improved ones which were designed to have three arched roofs and three sawtooth like roofs with the openings for ventilation, respectively. The distribution of inside temperature measured was relatively uniform in Type 2 and 3 by the natural ventilation through the openings of the roof compared to Type 1 which had no openings. The relative light transmittance measured in Type 2 and 3 showed lower than that in Type 1, which suppressed the rise of inside temperature, For more accurate comparison, the differences between inside and outside temperatures to various wind speeds were calculated by the model. The difference in Type 1 was the greatest at lower wind speed below 1 ㎧, that is, the highest in inside temperature, but decreased rapidly as wind speed increased above 1 ㎧. Measured temperatures generally showed the same trends as calculated ones by the model. As a whole, the improved rain shelters(Type 2 and 3) showed better performance than the conventional one in ventilation as well as inside temperature.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.78-82
• /
• 1992

The changes in work function due to hydrogen and deuterium adsorption on W(123) plane are measured by means of Field Emission Method. In the case of hydrogen or deuterium adsorption, work function of W(123) plane at 78 K increase and after a maxium value, it decrease and saturated as increasing coverage. After annealing the tungsten emission tip at 200 K, the coverage corresponding to maximum change in work function was shifted toward low coverage and the effect of work function by terraces or steps of which orientation is [ O l l ] was observed.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.169-174
• /
• 2013

An experimental study has been conducted for the design of the regenerative oxy-fuel combustion system with ceramic ball. Various design parameters are considered such as ball size, regenerator weight, and combustion load. Regenerative system with a pair of oxygen burners and regenerators is set up and the temperature of oxygen and exhaust gas passing through ball regenerator is measured. It is shown that the temperature distributions with time are affected by ball diameter and regenerator weight, and the significant temperature change is observed by combustion load. As the ball size decreases and the regenerator weight increases, the regenerating temperature efficiency increases. It is found that the heat recovery ratio is low despites of high regeneration temperature efficiency.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.21-28
• /
• 2007

To analyze the changes in pH and elemental content ratio of wood charcoal and in FT-IR spectra of their surfaces, wood charcoals carbonized from Pinus koraiensis were used. pHs of wood charcoals carbonized from Pinus koraiensis at 300 and $400^{\circ}C$ were 5-27 and 6.80, respectively, whereas they were between 9.25~10.35 for the wood charcoals manufactured between $500{\sim}900^{\circ}C$ From the changes in the elemental ratios of Pinus koraiensis wood charcoal by increasing carbonization temperature, carbon (C) contents increased by elevating the carbonization temperature with the decreasing in content ratios of O and H. The largest changes in the ratio was found between the carbonization temperature 400 and $500^{\circ}C$. Ratios of C, O, H of the wood charcoal manufactured at 300 and $400^{\circ}C$ were 67.7, 28.9, 3.0% and 72.2, 24.9, 2.5%, respectively, while those at $500{\sim}900^{\circ}C$ were between 83.3~90.5, 13.6~9.0, 2.7~0.3%. The surface functional groups of Pinus koraiensis wood charcoals were determined by comparison of FT-IR spectra of the wood powder and the wood charcoal carbonized with the wood powder. The functional groups on the surface of wood charcoals carbonized at 300 and $400^{\circ}C$ were considered to be acidic groups like Lactone, Lactol, Carboxylic acid, Carboxylic anhydride, whereas Pyrone types could be the major functional groups for the wood charcoals carbonized between 500 and $900^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.106-112
• /
• 2012

In order to understand the growth and ecophy -siological response of ginseng to global warming condition, we cultivated one and two year ginseng seedlings in control (ambient $CO_2$ + ambient temperature) and global warming treatment (elevated $CO_2$ + elevated temperature) from March 2010 to July 2011. Shoot appearance and initiation of flowering were advanced by 3-4 days in global warming treatment than in control. However, timing of fruit setting and seed ripeness was similar in both control and global warming treatment. Shoot length was longer in global warming treatment than in control, and also the number of leaves was much in global warming treatment. Fresh root weight was not different between control and global warming treatment. Photosynthetic rate was higher in global warming treatment than at control. Photosynthetic rate and transpiration rate were higher in two year seedlings than in one year seedlings at control, but was not different between seedling age of ginseng in global warming treatment. Water use efficiency was higher in one year seedlings than two year seedlings at control and global warming treatment. These results demonstrated that Korean ginseng more or less positively responds to global warming situation.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.93-102
• /
• 2016

This research was conducted for major cultivated chestnut (Castanea spp.) in Korea to compare chestnut quality characteristics according to storage temperatures ($4^{\circ}C$ vs. $-1^{\circ}C$) and cultivars. Color, hardness, soluble solids content (SSC), rate of decay and sensory evaluation were investigated during 16 weeks storage. Cultivars 'Tsukuba' and 'Ishizuchi' showed the least pericarp color change while cultivars 'Riheiguri' and 'Daebo' showed the most pericarp color change during storage. Chestnut fruits stored at $-1^{\circ}C$ showed less pericarp color change than those stored at $4^{\circ}C$. Cultivars 'Arima' and 'Tanzawa' exhibited the decrease tendency of hardness with lowest hardness during storage at $-1^{\circ}C$. Chestnut fruits stored at $4^{\circ}C$ showed high hardness than those stored at $-1^{\circ}C$. Cultivars 'Riheiguri' showed the highest increase of SSC, while cultivar 'Arima' showed the lowest increase of SSC after 16 weeks of storage. The SSC increased in nuts from all cultivars at both temperatures, but nuts stored at $-1^{\circ}C$ showed higher increases in SSC than nuts stored at $4^{\circ}C$. Cultivars 'Ishizuchi' and 'Riheiguri' showed high rates of decayed nuts in contrast to cultivars 'Daebo', 'Okkwang' and 'Tanzawa' that showed low rates of decayed nuts during storage. The chestnut fruit stored at $-1^{\circ}C$ showed less decay than fruit stored at $4^{\circ}C$. Texture and sweetness were tested for sensory evaluation. Among the tested cultivars, 'Riheiguri', 'Daebo' and 'Tsukuba' showed hard texture and very sweetness, while 'Tanzawa' showed relatively soft texture. 'Arima' and 'Okkwang' showed weak sweetness during storage. Nuts stored at $4^{\circ}C$ exhibited harder texture than nuts stored at $-1^{\circ}C$ while $-1^{\circ}C$ exhibited more sweetness than nuts stored at $4^{\circ}C$. Chestnuts for hard texture and short-term storage (less than one month), $4^{\circ}C$ will be a proper storage temperature, while in order to store long-term (more than 4 month), $-1^{\circ}C$ will be a proper storage temperature. Result from this study provide base-line data of postharvest management for Korean cultivated chestnut as well as contributing increased product value and income for chestnut producers.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.4
• /
• pp.85-92
• /
• 1996

This paper describes thermal-mechanical performance and ultimate mechanical-strength test for the purpose of aging analysis of suspension insulator. The temperature of insulator surface according to the aging of suspension insulator was rised about 2[$^{\circ}C$] to 7~8[$^{\circ}C$] difference comparing with the atmospheric temperature. The autoclave expansion of portland cement at the specimen that had much puncture insulator(autoclave measuring value : 0.37[%]) was higher than those of a little puncture insulator (autoclave measuring value : 0.1[ %] ). Quality standard and mechanical-strength of used suspension insulator deteriorate more remarkably than those of new suspension insulator. It is required that thermal-mechanical performance test standard be revised in the future.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.511-516
• /
• 1999

The effects of environmental and compositon factors, such as reaction time, metal ions, pH, agitation speed, the weight ratio of water to oil, and the weight of enzyme, on the hydrolysis of oils by Lipase-OF were investigated. In case of oils with low melting point, the optimum temperature of hydrolysis were the enzyme activity was maximum was 37$^{\circ}C$. However, when the melting temperature was higher than 4$0^{\circ}C$, the optimum temperature was around the fusion temperature. The activity of Lipase-OF decreased very rapidly with increase of temperature in the range of higher than 45$^{\circ}C$ and the activity perished above $65^{\circ}C$. The effect of agitation speed was investigated from 150 to 650 rpm. The hydrolysis of oils increased as the agitation speed increased up to 350 rpm, but it did not increase any more above 350 rpm. The weight ratio of water to oil was changed from 1 : 9 to 9 : 1 for the investigation of the effect on the hydrolusis. The weight ratio for maximum hydrolysis was 1 : 1. $Ca^{2+}\;and\;Mg^{2+}$ among various metal ions had some effect on the stimulation of hydrolysis. The optimum concentration of the ions was about 100ppm at which the hydrolysis increased, compared with that of distilled water, by 2 to 3%. The Optimum pH of Lipase-OF was 7. The hydrolysis decreased as the pH decreased as the pH decreased and also decreased as the pH increased. The content of enzyme affected the hydrolysis of oil. The hydrolysis increased with the content of Lipase-OF in the range of less than 0.013 wt% of substrate. However, the increase of hydrolysis with the content of Lipase-OF ceased above 0.013 wt%. The experiments investigating the effect of environmental and composition factors on the hydrolysis of oils showed that the optimum temperature was 37$^{\circ}C$, the pH 7, the concentration of $Ca^{2+}\;or\;Mg^{2+}$ 100 ppm, the agitation speed 350 rpm, the weight ratio of water to oil 1 : 1, and the content of Lipase-OF 0.013 wt% of substrate.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.262-269
• /
• 2016

The objective of this study was to evaluate the effect of storage temperature on fruit quality attributes and physiological disorders including peel blackening in 'Sangjudungsi' persimmon (Diospyros kaki Thunb.) fruit stored in air at -1, 0.5 or $3^{\circ}C$ for up to 3 months. Higher storage temperature reduced ethylene production but not respiration rate, compared with lower storage temperature. Flesh firmness decreased continuously as storage time passed but firmness was reduced rapidly in the fruits stored at higher storage temperature. Fresh weight loss increased at higher storage temperatures. Soluble solids content was higher at lower storage temperature than at higher storage temperature. All color variables ($L^*$, $a^*$, $b^*$) were reduced by lower storage temperature, compared with higher storage temperature, regardless of tissue regions. Fruit softening increased as storage duration advanced and with the increase in storage temperature. Results indicated that the 'Sangjudungsi' persimmon fruits stored at higher storage temperature ($3^{\circ}C$) could not retain fruit quality properly on account of lower flesh firmness and higher incidence of peel blackening and fruit decay, compared with lower storage temperature.