• Title/Summary/Keyword: 온도변화율

Search Result 2,108, Processing Time 0.035 seconds

Preparation of Nanoporous Activated Carbon with Sulfuric Acid Lignin and Its Application as a Biosorbent (황산 가수분해 잔사 리그닌을 이용한 나노 세공 활성탄 제조 및 친환경 흡착제로의 활용 가능성 평가)

  • Hwang, Hyewon;Choi, Joon Weon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.46 no.1
    • /
    • pp.17-28
    • /
    • 2018
  • In this study, catalytic activation using sulfuric acid lignin (SAL), the condensed solid by-product from saccharification process, with potassium hydroxide at $750^{\circ}C$ for 1 h in order to investigate its potential to nanoporous carbon In this study, catalytic activation using sulfuric acid lignin (SAL), the condensed solid by-product from saccharification process, with potassium hydroxide at $750^{\circ}C$ for 1 h in order to investigate its potential to nanoporous carbon material. Comparison study was also conducted by production of activated carbon from coconut shell (CCNS), Pinus, and Avicel, and each activated carbon was characterized by chemical composition, Raman spectroscopy, SEM analysis, and BET analysis. The amount of solid residue after thermogravimetric analysis of biomass samples at the final temperature of $750^{\circ}C$ was SAL > CCNS > Pinus > Avicel, which was the same as the order of activated carbon yields after catalytic activation. Specifically, SAL-derived activated carbon showed the highest value of carbon content (91.0%) and $I_d/I_g$ peak ratio (4.2), indicating that amorphous large aromatic structure layer was formed with high carbon fixation. In addition, the largest changes was observed in SAL with the maximum BET specific surface area and pore volume of $2341m^2/g$ and $1.270cm^3/g$, respectively. Furthermore, the adsorption test for three kinds of organic pollutants (phenol, 2,4-Dichlorophenoxyacetic acid, and carbofuran) were conducted, and an excellent adsorption capacity more than 90 mg/g for all activated carbon was determined using 100 ppm of the standard solution. Therefore, SAL, a condensed structure, can be used not only as a nanoporous carbon material with high specific surface area but also as a biosorbent applied to a carbon filter for remediation of organic pollutants in future.

Studies on the Morphological, Anatomical and Physiological Characters in Populus alba × glandulosa and its Parent (Populus alba × glandulosa 와 그의 양친종(両親種)의 형태(形態), 해부학(解剖學), 생리학적(生理学的) 연구(硏究))

  • Kim, Chung Suk;Chon, Sang Keun;Hwang, Jin Sung
    • Journal of Korean Society of Forest Science
    • /
    • v.49 no.1
    • /
    • pp.11-31
    • /
    • 1980
  • The morphological, anatomical and physiological traits were eximined for Populus alba ${\times}$ glandulosa which is an important planting species in Korea. The results obtained are as follows: 1. External characters in the leaf shape and chaff shape in the catkin were inherited as incomplete dominance but nectar gland was inherited as dominance. 2. Among the 15 selected clones, 9 clones were male, 2 clones female and 2 clones monoecious. 3. There were well-developed cork layers and bast fiber bundles in the bark. 4. Primordial leaves composed of 3 layers of cells and those undifferentiated into palisade and spongy parenchymas differed in its origin. 5. Leaf scare consisted of two kinds of tissues; one is connected to vascular bundle and the other not to vascular bundle. Tissues which had been connected to vascular bundle were isolated with only 2 or 3 layers of cork cells from the outside. 6. There was complicated arrangement in the vascular bundle of petioles. 7. Growth of the hybrid was sensitively influenced by external temperature, day-length and amount of light. In particular, it was apparent in height growth. 8. Flatness, loam soils and a $60{\times}60cm$ spacing might be best factors for the growth of P. alba ${\times}$ glandulosa. 9. The rooting of 15 clones was dependant upon external factors. 10. The growth of P. alba ${\times}$ glandulosa was best at around 80% of soil moisture content on the basis of plot water capacity. 11. Temperature difference between inside and outside stems below 100cm during the winter was the greatest at the south among seasons and among directions. 12. The sap movement was markedly influenced by air temperature, relative humidity in forest stand and moisture content in stem. 13. Total sugars in the cortex changed with season but did not differ in the dircetion of the stem. 14. Isoperoxidase variations in the leaf were different among 15 clones. Thus, it may be useful as a criterium for clonal identification. 15. The rate of soil moisture content decreased at a rapid slope was faster than that at a slow slope. Poor growth of P. alba ${\times}$ glandulosa at the slope was probably due to depletion of soil moisture.

  • PDF

Influence of Oven Heating and Water Heating on the Physical and Mechanical Properties of Wood (열기(熱氣) 및 열수처리(熱水處理)가 목재(木材)의 이학적(理學的) 성질(性質)에 미치는 영향(影響))

  • So, Won-Tek;Jung, Hee-Suk
    • Journal of the Korean Wood Science and Technology
    • /
    • v.8 no.1
    • /
    • pp.13-21
    • /
    • 1980
  • This experiment was carried out to investigate the effect of heating periods on the physical and mechanical properties of maple (Acer mono Max.) by oven heating and heating in water at 100$^{\circ}C$ for 0, 2, 4, and 6 days respectively. The results obtained are summarized as follows: 1. The green volume specific gravity due to oven heating decreased from 6 days of exposure, and that, due to heating in water decreased from 4 days of exposure. 2. The radial shrinkage due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 6 days of exposure. The tangential shrinkage due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 2 days of exposure. 3. The amount of water absorption due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 4 days of exposure. 4. The compressive strength pararelled to grain due to oven heating increased till 4 days of exposure but decreased from 6 days, and that due to heating in water decreased from 2 days of exposure. 5. The shearing strength pararelled to grain due to oven heating increased till 2 days of exposure, but decreased from 4 days of exposure, and that due to heating in water decreased from 4 days of exposure. 6. The bending strength due to oven heating increased till 4 days of exposure but decreased from 6 days, and that due to heating in water decreased from 6 days of exposure. The impact bending absorbed energy due to oven heating decreased from 4 days of exposure, and that due to hearing in water decreased from 2 days of exposure.

  • PDF

Twenty-year Experience of Mitral Valve Replacement with the St. Jude Medical Mechanical Valve Prosthesis (St. Jude 기계 판막을 이용한 승모판막 치환술의 20년 장기성적)

  • Seo Yeon-Ho;Kim Kong-Soo;Jo Jung-Ku
    • Journal of Chest Surgery
    • /
    • v.39 no.7 s.264
    • /
    • pp.527-533
    • /
    • 2006
  • Background: A retrospective study was conducted to analyze the results of St. Jude Medical mitral valve replacement at the Chonbuk National University Hospital since the initial implant in May 1984. Material and Method: Between May of 1984 and December of 1996, 95 patients underwent MVR with the St. Jude Medical mechanical valve prosthesis at Department of Medical Science of Chonbuk National University Hospital and follow-up ended in May of 2004. Result: Age ranged from 19 to 69 years. Follow-up (mean${\pm}$standard deviation) averaged $10.6{\pm}4.2\;year$. Thirty-day operative mortality was 4.2% (4/95). Nine late deaths have occurred and actuarial survival was $90.5{\pm}3.0%,\;87.9{\pm}3.4%\;and\;83.2{\pm}4.6%$ at 5, 10 and 20 years, respectively. Probability of freedom from valve-rotated death was $95.5{\pm}2.1%,\;94.3{\pm}2.4%\;and\;91.0{\pm}3.9%$ at 5, 10 and 20 years, respectively. Seven patients have sustained thromboembolic events (1,05%/patient-year). Fifteen patients had anticoagulation related hemorrhage (3.56%/patient-year). There was no structural valve deterioration. Probability of freedom from all complications was $82.0{\pm}3.9%,\;71.3{\pm}4.8%\;and\;42.4{\pm}10.5%$ at 5, 10 and 20 years, respectively. Conclusion: We confirm the effective and excellent durability of the St. Jude Medical prosthesis in the mitral position with a low event rate at long-term follow-up. It also demonstrates the commonly encountered practical difficulty of adjusting the anti-coagulation protocol in patients with prosthetic mitral valves.

Studies on the Acute Toxicity of an Insecticide Cartap to Several Species of Freshwater Animals (몇가지 담수산동물(淡水産動物)에 대한 살충제 Cartap의 급성독성(急性毒性)에 관한 연구(硏究))

  • Byun, Sang-Ji;Choi, Seung-Yoon;Kim, Gwang-Po
    • Korean Journal of Environmental Agriculture
    • /
    • v.3 no.2
    • /
    • pp.43-49
    • /
    • 1984
  • The acute toxicity of an insecticide cartap to several species of freshwater animals was evaluated in the laboratory with special reference to the species specificity, effects of water temperatures and pH values. The aquatic animals tested were the Carassius auratus L., Aphyocypris chinensis $G{\"{U}}NTHER$, Misgurus anguillicaudatus CANTOR, Moina macrocopa STRAUS. The susceptibility of aquatic animals to cartap was different with the species of animals. At the water temperature of $25^{\circ}C$ and pH 7, TLm values of the insecticide to the C. auratus L., A. chinensis G. and M. anguillicaudatus were 0.88, 0.26 and 0.13 ppm in 48 hours, respectively, and to Moina macrocopa S., 306 ppm in 3 hrs. In the case of the three species of fish, TLm 48 values were significantly decreased with rise in temperature. In the case of water flea, where TLm value was 107 ppm at $20^{\circ}C$, there was no consistent response to temperature change, with the highest figure at $25^{\circ}C$ than at either 20 or $30^{\circ}C$. and the susceptibility of C.auratus L. and A. chinensis G. greatly decreased with the increase of pH in water. The toxicity to M. anguillicaudatus and M. macrocopa was significantly higher at pH 9 than at pH 6 or 7. In conclusion, the toxicological reactions of the freshwater animals to cartap were variably influenced by the water temperatures and pH values of water and species of animals.

  • PDF

Effect of Wangsuk Stream on NOM and Chlorinated DBPFPs in Han River Water (왕숙천 유입에 따른 한강본류의 천연유기물질과 염소소독부산물 생성능 변화)

  • Park, Hyeon;Kim, Chang-Mo;Chang, Hyun-Seong;Kim, Hyun-Suk;Park, Chang-Min;Yu, Myong-Jin
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.28 no.10
    • /
    • pp.1031-1037
    • /
    • 2006
  • The main purposes of this study were to compare the characteristics of fractionated natural organic matters(NOM) from Han River water and Wangsuk(W) stream water, and to investigate the relationships between NOM and the formation of disinfection by products(DBPs). Three types of resin such as XAD-4, XAD-7HP and IRC-50 were used to isolate the water samples into three organic fractions. The DOC concentrations of raw waters were relatively low($1.5{\sim}3.3$ mg/L) at all seasons. The hydrophilic was the major constituent, contributing $44{\sim}63%$ of the total NOM and hydrophobic $21{\sim}33%$, transphilic $16{\sim}31%$, respectively. The formation of trihalomethans(THMs) was highly influenced by particulated NOM especially in the rainy season, whereas haloaceticacid forming potentials(HAAFPs) depended more on the hydrophilic fraction of dissolved NOM which is known to be difficult to be removed through conventional processes. The NOM of W stream was characterized as 15% hydrophobic, 9% transphilic, and 76% hydrophilic. In the fractionation of NOM using resins, $20{\sim}40%$ of the NOM in W tributary water could not be clearly isolated, whereas, 85% of the NOM in the raw water was recovered. Although the DOC concentration of tributary water was higher than the raw waters from the Han River, the DBPFPs was approximately 40% of the raw waters. In DBPFPs aspect, W stream has less effect than Han River water itself. Bromide in tributary waters discharged from waste water treatment plants has been found to shift the distribution of THMs and HANs to the more brominated DBPs.

The Computer-Aided Simulation Study on the Gasification Characteristics of the Roto Coal in the Partitioned Fluidized-Bed Gasifier (상용모사기를 이용한 로토석탄의 분할유동층 가스화기 가스화 특성 모사)

  • Park, Young Cheol;Moon, Jong-Ho;Lee, Seung-Yong;Lee, Dong-Ho;Jin, Gyoung Tae
    • Korean Chemical Engineering Research
    • /
    • v.50 no.3
    • /
    • pp.511-515
    • /
    • 2012
  • In this study, we used a commercial simulator to investigate the gasification characteristics of Roto coal in the partitioned fluidized-bed gasifier, which consists of 4 parts such as coal pyrolysis, char gasification, tar/oil gasification and char combustion. The heating medium was exchanged between the combustion part and the gasification part in order to supply the energy needed for pyrolysis and gasification. The correlation model from experimental data in relation to the reaction temperatures, the reaction gases and the coal feed rates was derived for the coal pyrolysis. The equilibrium model was used for the gasification and the combustion model for the char combustion. In order to compare the reaction behavior of the partitioned fluidized-bed gasifier, the single-bed gasifier was also simulated. The cold gas efficiency of both partitioned fluidized-bed gasifier and single-bed gasifier was almost the same. The $H_2$ and $CH_4$ contents of the syngas in the partitioned fluidized-bed gasifier slightly increased and the CO and $CO_2$ contents slightly decreased, compared with the singlebed gasifier. In order to verify the model, ten cases of the single-bed gasification experiment have been simulated. The contents of CO, $CO_2$, $CH_4$ in the syngas from the simulation corresponded with the experimental data while those of $H_2$ was slightly higher than experimental data, but the tendency of $H_2$ content in the syngas was similar to the experiments. In the coal conversion, the simulation results were higher than the experiments since equilibrium model was used for the gasification so that the residence time and contact time in the model is different from the experiments.

Oxidative Desulfurization of Marine Diesel Using Keggin Type Heteropoly Acid Catalysts (Keggin형 헤테로폴리산 촉매를 이용한 선박용 경유의 산화 탈황)

  • Oh, Hyeonwoo;Woo, Hee Chul
    • Clean Technology
    • /
    • v.25 no.1
    • /
    • pp.91-97
    • /
    • 2019
  • Oxidative desulfurization (ODS) has received much attention in recent years because refractory sulfur compounds such as dibenzothiophenes can be oxidized selectively to their corresponding sulfoxides and sulfones, and these products can be removed by extraction and adsorption. In this work, The oxidative desulfurization of marine diesel fuel was performed in a batch reactor with hydrogen peroxide ($H_2O_2$) in the presence of various supported heteropoly acid catalysts. The catalysts were characterized by XRD, XRF, XPS and nitrogen adsorption isotherm techniques. Based on the sulfur removal efficiency of promising silica supported heteropoly acid catalysts, the ranking of catalytic activity was: $30\;H_3PW_{12}/SiO_2$ > $30\;H_3PMo_{12}/SiO_2$ > $30\;H_4SiW_{12}/SiO_2$, which appears to be related with their intrinsic acid strength. The $30\;H_3PW_{12}/SiO_2$ catalyst showed the highest initial sulfur removal efficiency of about 66% under reaction conditions of $30^{\circ}C$, $0.025g\;mL^{-1}$ (cat./oil), 1 h reaction time. However, through the recycle test of the $H_3PW_{12}/SiO_2$ catalyst, significant deactivation was observed, which was attributed to the elution of the active component $H_3PW_{12}$. By introducing cesium cation ($Cs^+$) into the $H_3PW_{12}/SiO_2$ catalyst, the stability of the catalyst was improved with changing the solubility, and the $Cs^+$ ion exchanged catalyst could be recycled for at least five times without severe elution.

Assessment of Fire-Damaged Mortar using Color image Analysis (색도 이미지 분석을 이용한 화재 피해 모르타르의 손상 평가)

  • Park, Kwang-Min;Lee, Byung-Do;Yoo, Sung-Hun;Ham, Nam-Hyuk;Roh, Young-Sook
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.23 no.3
    • /
    • pp.83-91
    • /
    • 2019
  • The purpose of this study is to assess a fire-damaged concrete structure using a digital camera and image processing software. To simulate it, mortar and paste samples of W/C=0.5(general strength) and 0.3(high strength) were put into an electric furnace and simulated from $100^{\circ}C$ to $1000^{\circ}C$. Here, the paste was processed into a powder to measure CIELAB chromaticity, and the samples were taken with a digital camera. The RGB chromaticity was measured by color intensity analyzer software. As a result, the residual compressive strength of W/C=0.5 and 0.3 was 87.2 % and 86.7 % at the heating temperature of $400^{\circ}C$. However there was a sudden decrease in strength at the temperature above $500^{\circ}C$, while the residual compressive strength of W/C=0.5 and 0.3 was 55.2 % and 51.9 % of residual strength. At the temperature $700^{\circ}C$ or higher, W/C=0.5 and W/C=0.3 show 26.3% and 27.8% of residual strength, so that the durability of the structure could not be secured. The results of $L^*a^*b$ color analysis show that $b^*$ increases rapidly after $700^{\circ}C$. It is analyzed that the intensity of yellow becomes strong after $700^{\circ}C$. Further, the RGB analysis found that the histogram kurtosis and frequency of Red and Green increases after $700^{\circ}C$. It is analyzed that number of Red and Green pixels are increased. Therefore, it is deemed possible to estimate the degree of damage by checking the change in yellow($b^*$ or R+G) when analyzing the chromaticity of the fire-damaged concrete structures.

Estimation of the Second Flight Season of Chilo suppressalis (Lepidoptera: Crambidae) Adults in the Northeastern Chinese Areas (중국 동북부 지역에서 이화명나방(Chilo suppressalis)(Crambidae) 2화기 성충 발생 시기 추정)

  • Jung, Jin Kyo;Kim, Eun Young;Yang, Woonho;Lee, Seuk-Ki;Shin, Myeong Na;Yang, Jung-Wook;Ju, Hongguang;Jin, Dongcun;Pao, Jin;Wang, Jichun;Zhu, Feng
    • Korean journal of applied entomology
    • /
    • v.61 no.2
    • /
    • pp.335-347
    • /
    • 2022
  • We investigated the emergence patterns of Chilo suppressalis (Lepidoptera: Crambidae) adults using sex pheromone traps in the three northeastern areas, Dandong (40°07'N 124°23'E) (Liaoning province), and Gongzhuling (43°30'N 124°49') and Longjing (42°46'N 129°26'E) (Jilin province), China, in 2020 and 2021. Two times of adult flight seasons were isolated clearly during the rice growing periods in the all areas, in which the first season from mid May to late July, and the second season from mid July to mid September were observed. The adult emergence seasons in the areas at higher latitude were later than that at lower latitude. Using the adult emergence data during the first flight seasons, the second flight seasons were estimated through insect phenology modelling, and compared with the observed data. Temperature-dependent life history models (developmental rate, development completion, survival rate, adult aging rate, total fecundity, oviposition completion, and adult survival completion) were collected or constructed for each life stage of C. suppressalis, in which the data from the four previous studies were used. Those models were combined in an insect phenology estimation software, PopModel, and operated for the observed areas. In the results, the phenology modelling operated with the models based on the data of shorter larval periods in the previous studies estimated more accurately the second flight seasons. In 2021, we investigated the change of damaged hill ratios of rice with observing the adult emergence at Dandong and Longjing, 2021. The increase periods of damaged hill ratios of rice were observed two times during the total rice cultivation season, which may be caused by different generations of C. suppressalis larvae.