• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.22-31
• /
• 2013

In this paper, we propose a method that estimates the channel response from underwater communication signals with MMSE (Minimun Mean Squared Error) and detects dominant components automatically based on power of response components using CFAR (Constant False Alarm Rate). Statistical characteristics are analyzed with variation of magnitude and phase and time coherence via experimental data obtained by drifting transmitter and receiver. We show that bit error rate has small difference, 1.2 times, compared with the case using every channel information estimated within data period when estimation and equalization is performed with extracted characteristic obtained by the proposed method.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.203-210
• /
• 2014

In this study, combustion behaviour were to analyze by comparing experimental data against predicted values. In developing pellet boiler performance, various factors such as combustion chamber shape, input air velocity, the amount of fuel, temperature, and fuel characteristics need to be analyzed. Analytical model using a numerical method is useful to overcome time and cost consuming by practical experiment. By controlling feeding rate of fuel, flue gas composition and temperature distribution obtained form experiment were compared with predicted values using FLUENT(ANSYS, Inc., Southpointe). Measurement were in good agreement with model predictions : with 0.60 % for $CO_2$ 0.73% for $O_2$ when compared with independent data sets.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.98-98
• /
• 2017

대부분의 가정과 요식업체, 식품가공업계에서 이용하고 있는 식용유지는 저장 및 가공과정 중에 산패가 빈번하게 일어나게 된다. 기존에는 유지 산패를 측정하기 위해 산가, 과산화물가 등을 측정하는 이화학적인 적정방법을 이용하였는데 실험자의 숙련도에 따라 결과의 오차가 발생할 수 있고, 반복실험으로 인한 시간과 비용이 많이 소모되는 등 여러 제약사항을 포함하고 있어 식용유지의 산패를 실시간 비파괴적으로 분석할 수 있는 기술의 개발에 많은 관심이 모아지고 있다. 따라서, 본 연구에서는 식용유지의 저장조건에 따른 산패정도를 비파괴적으로 평가하기 위한 근적외선 분광분석과 인공신경망 분석기술을 개발하여 그 실효성을 평가하였다. 식물성 식용유지인 들기름을 특정 온도에서 일정한 시간동안 저장하면서 이화학적 적정방법을 통해 산가와 과산화물가를 측정하였으며 동일한 시료의 근적외선 투과스펙트럼을 획득하였다. 수집된 정보를 이용하여 유지 산패 예측 모델을 개발하기 위해 다변량 분석기법 (주성분 회귀분석, 최소자승 회귀분석과 인공신경망 분석)을 적용하였다. 분석 결과, 인공신경망 분석모델이 산가 ($R^2_{tra}:0.9037$, $R^2_{val}:0.8175$, $R^2_{test}:0.8555$)와 과산화물가 ($R^2_{tra}:0.9210$, $R^2_{val}:0.9341$, $R^2_{test}:0.8286$)의 예측 성능이 가장 우수한 것으로 확인되었다. 본 연구의 결과들은 농산물과 식품의 성분 측정뿐만 아니라 다른 산업분야에서도 유용하게 활용될 수 있을 것으로 기대되어진다.

• Journal of Broadcast Engineering
• /
• v.11 no.1 s.30
• /
• pp.91-99
• /
• 2006

Pre-processing is one of image processing techniques to enhance image quality or appropriately convert a given image into another form for a specific purpose. An 8 bit depth map obtained by a depth camera usually contains a lot of noisy components caused by the characteristics of depth camera and edges are also more distorted by the quality of a source object and illumination condition comparing with edges in RGB texture image. To reduce this distortion, we use noise removing filters, but they are only able to reduce noise components, so that distorted edges of depth map can not be properly recovered. In this paper, we propose an algorithm that can reduce noise components and also enhance the quality of edges of depth map by using edges in RGB texture. Consequently, we can reduce errors in multi-view stereo image synthesis process.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.486-491
• /
• 1990

To develop a new spice material garlic juice was prepared from peeled garlic and its composition, density and boiling point rise were investigated. Major components of the garlic juice were moisture(68.01%), crude protein(6.50%) and carbohydrate(25.39%). Yield of the juice from the peeled whole garlic was 49.50%(w/w). Density of the garlic juice with solid content of 32 to $65^{\circ}$ Brix was in the range of 1,107 to $1,243kg/m^3$. Boiling point rise of garlic juice increased exponentially with the increase of solid content. In the solid content range of 32 to $65^{\circ}$ Brix, the boiling point rise could be predicted with following experimental equation with average error of less than 7%. $$BPR=1.4105.\;P^{0.1338}.\;exp(0.0357.\;X_5-1.3925)$

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.405-414
• /
• 2009

This paper proposed a methodology based on ultrasonic diffraction technique to inspect the depth of a crack initiated from a notch of CT specimen by fatigue test, and its usefulness was verified by experiments. Especially, in order to identify accurately the diffractive waves from the crack tip in the situation where there are extra diffractive elements such as a notch, we have tried imaging by transducer scan and analyzed the propagation path of diffracted wave. Two specimens with and without a crack were experimented. Higher frequency and larger refractive angle of transducer showed a tendency to decrease the error in the measurements, and the measured crack depth showed an error less than 0.38 mm in case of 4 MHz $60^{\circ}-60^{\circ}$. The proposed methodology is applicable to weak diffractive sources, and so that it would be useful to inspect micro cracks and for their depth sizing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.408-415
• /
• 2006

This paper suggests an improved system-level model of RF power amplifiers(PAs) including memory effects, and validates the suggested model by analyzing the power spectral density of the output signal with a predistortion linearizer. The original three-box(Wiener-Hammerstein) model uses input and output filters to capture RF frequency response of PAs. The adjacent spectral regrowth that occurs in three-box model can be perfectly removed by Hammerstein structure predistorter. However, the predistorter based on Hammerstein structure achieves limited performance in real PA applications due to other memory effects except RF frequency response. The spectrum of the output signal can be predicted accurately using the suggested model that changes a memoryless block in a three-box model with a memory polynomial. The proposed model accurately predicts the output spectrum density of PA with Hammerstein structure predistorter with less than 2 dB errors over ${\pm}30$ MHz adjacent channel ranges for IEEE 802.11 g WLAN signal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1262-1270
• /
• 2007

In this paper, we propose a new distortion cancellation mechanism for a balanced power amplifier structure using the carrier cancellation loop of a feedforward and post-distortion technique. The proposed cross post-distortion balanced linear amplifier can reduce nonlinear components as much as the conventional feedforward amplifier through the output dynamic range and broad bandwidth. Also the proposed system provides higher efficiency than the feedforward. The capacities of power amplifier and error power amplifier in the proposed system are analyzed and compared with those of feedforward amplifier. Also the operation mechanisms of the three kind loops are explained. The proposed cross post-distortion balanced linear power amplifier is implemented at the IMT-2000($f_0=2.14\;GHz$) band. With the commercial high power amplifiers of total power of 240 W peak envelope power fer base-station application, the adjacent channel leakage ratio measurement with wideband code division multiple access 4FA signal shows 18.6 dB improvement at an average output power of 40 dBm. The efficiency of fabricated amplifier Improves about 2 % than the conventional feedforward amplifier.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.4
• /
• pp.50-59
• /
• 1994

The pan-european paging system European Radio MEssage System (ERMES), a new system of digital information communication, has 16 channels with 25KHz channel spacing. The ERMES modulation format is 4-PAM/FM. The ERMES operates in the frequency range 169.4125MHz$\~$169.8125MHz. In this paper, an ERMES receiving system according to the European Telecommunication Standard Institute(ETSI) specfication with a double error correction capability is designed. The ERMES receiver system is designed with the conventional circuit and its error performance for muitiple signal modulated by the 4-PAM/FM method are analyzed. Since amplitude imbalance among the signal components can impair the system performance when several receivers are operated on the same RF channel simultaneously, the optimal parameters are obtained in designing the radio system. Performance of the proposed receiver system is verified via computer simulation for processing procedure.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.2
• /
• pp.41-50
• /
• 1993

This paper describes an effort to develop a microcomputer-based parameter identification system for three phase and two phase brushless DC motor. Back EMF equation is derived from back EMF waveform of three phase and two phase brushless DC motor. In this paper, a new identification algorithm for the brushless DC motor parameters by Pasek's technique is developed. It is found that Pasek's equation is valid for the brushless DC motor, too. The results obtained clearly shows that it is possible to implement the identification system for the determination of the brushless DC motor parameters. To minimize errors due to the ripple component in the measured armature current, digital averaging firis employed. The whole identification process of signal generation, measuring, parameter determination is fully automated. The use of the propod method in the parameter identifition system shows that the averaged current curve is in excellent agreement with the estimated current curve. Therefore, this close agreement confirms the validity of this technique.