• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.15-19
• /
• 2001

Transparent and conducting tin oxide thin films were prepared on soda lime silicate glass by thermal chemical vapour deposition. Thin films were fabricated from mixtures of tetramethyltin (TMT) as a precursor, oxygen or oxygen containing ozone as an oxidant. The properties of fabricated tin oxide films are highly changed with variations of substrate temperature. Optimized thin films could be prepared on TMT, which flow rate of 8 sccm, oxygen flow rate of 150 sccm and substrate temperature of 38$0^{\circ}C$. We reduced deposition temperature about$ 180^{\circ}C$ by using of oxygen containing ozone instead of pure oxygen and resistivity of thin films was decreased from ~ ${\times}10^{-2}{\Omega}cm$ to ~${\times}10^{-3}{\Omega}cm$.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.193-200
• /
• 1998

It is well known that EPDM(ethylene propylene diene monomer) rubber has inherently excellent resistance to the weathering, ozone, heat, cold and moisture, whereas crosslinked IIR (isobutylene isoprene divlnyl benzene terpolymer) shows proper resistance to the water and gas permeation. Various characteristics of EPDM blend with crosslinked IIR such as curing characteristics, mechanical properties, dispersion of minor component and gas impermeability were explored. The optimum curing time $(t_{90})$ examined with peroxide was decreased by adding small amount of crosslinked IIR to the EPDM rubber. Mechanical properties of blends such as tensile strength, hardness and elongation at break were enhanced by increasing EPDM content. These results might be explained with the affinity of carbon black to the EPDM rubber. On the other hand, the physical properties were not changed significantly after aging, and the increase of crosslinked IIR fraction caused the decrease of compression set to small rate. EPDM rubber shows different behavior with crosslinked IIR in oxygen permeability. By adding 30wt.% crosslinked IIR to the EPDM rubber, the resistance to the oxygen permeation was improved up to three times than that of pure EPDM rubber. Conclusively, EPDM blend containing 30wt.% crosslinked IIR might be commercially applied to the o-ring and electric parts because of its proper resistance to the weathering, ozone and oxygen permeability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.176-176
• /
• 2012

본 연구는 GaN 기반의 전자소자의 표면 패시베이션 방법으로 열산화 공정을 이용한 알루미늄산화막 패시베이션 공정에 대하여 연구하였다. 결정질의 알루미늄산화물은 경도가 크고 화학적으로 안정적이기 때문에 외부 오염에 대한 소자 표면을 효과적으로 보호할 수 있으며, 열적안정성이 뛰어나 공정중 또는 공정 후의 고온 환경에서의 열 손상이 적은 장점을 가진다. 결정질 알루미늄산화막($Al_2O_3$)을 소자 표면에 형성하기 위해서 일반적으로 TMA (trimethlyaluminium)와 오존($O_3$)가스를 이용한 ALD 공정법이 사용되고 있으나 공정 비용이 비싸고 열산화막에 비해 전자 trapping이 많이 발생하여 전자이동도가 저하되는 단점이 있어, 본 연구에서는 열산화 공정을 이용하여 소자의 전기적 특성 저하를 발생시키지 않는 알루미늄산화막 패시베이션을 수행하였다. 실험에 사용된 기판은 AlGaN/GaN 이종접합 구조가 증착된 HEMT 제작용 기판을 사용하였으며 TLM 구조를 제작하여 소자의 채널 면저항 및 절연영역간 누설전류 특성을 확인하였다. TLM 구조가 제작된 샘플 위에 알루미늄을 100 ${\AA}$ 두께로 소자위에 증착하고 $O_2$ 분위기에서 약 $525{\sim}675^{\circ}C$ 온도로 3분간 열처리하여 알루미늄 산화막을 형성한 후 $950^{\circ}C$ 온도로 $N_2$ 분위기에서 30초간 안정화열처리 하여 안정한 알루미늄 산화막 패시베이션을 형성하였다. 알루미늄산화막 패시베이션 후 소자의 절연영역 사이의 누설전류는 패시베이션 전과 비슷한 크기를 나타냈고 패시베이션 후 채널의 면저항이 패시베이션 전에 비해 약 20% 감소한 것을 확인하였다. 또한 패시베이션된 소자와 패시베이션되지않은 소자에 대해 $900^{\circ}C$ 온도로 30초간 열처리한 결과 패시베이션 되지 않은 소자는 74%만큼 채널 면저항이 증가하였으며, 절연영역 누설전류가 다섯오더 크기로 증가한 반면 알루미늄산화막 패시베이션한 소자는 단지 13%의 채널 면저항의 증가를 나타내었고 절연영역 누설전류는 100배 감소한 값을 보여 알루미늄산화막 패시베이션이 소자의 열적 안정성을 향상시키는 것을 확인하였다.

• Elastomers and Composites
• /
• v.35 no.2
• /
• pp.149-156
• /
• 2000

trans-octylene rubber(TOR) was melt-blended with an incompatible NBR/EPDM (70/30) blend. Mixing torque and temperature were reduced as TOR was added to the NBR/EPDM blend. Rheometer results indicated that TOR participated in vulcanization and became a part of network. A scanning electron micrograph demonstrated that EPDM was dispersed in NBR matrix in the blend and the addition of TOR led to a finer dispersion of EPDM particles. On the addition of TOR, the tensile strength, the tensile strain as well as the modulus of the blend vulcanizates increased. The ozone resistance of the blends determined in terms of critical stress-strain parameter was significantly enhanced in the blend as TOR was added. Improvements in the properties were believed to be associated with fine morphology and the increase in crosslink density due to the chain entanglement of the ternary blends.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.556-563
• /
• 2007

We carried out a laboratory scale experiment about the characteristics of chemically active species produced in hybrid gas-liquid discharges. The electrode configuration which had high voltage electrode in the gas phase and ground electrode in the liquid was utilized while high voltage electrode has been typically positioned in the liquid in other studies. Our electrode was configured in such a way as to increase the energy efficiency of chemical reactions by creating a higher electrical field strength and a narrower pulse width than the typical electrode configuration. The highest ozone concentration was obtained at 45 kV which was the medium value in operating voltages. The decrease of solution conductivity increased the resistance of liquid phase and the electric field strength through the gas phase, so ozone gene-ration rate was enhanced. The increase of voltage promoted the production rate of hydrogen peroxide by increasing the electric field strength. In a lower voltage, the increase of solution conductivity increased the degradation rate of $H_2O_2$, so the $H_2O_2$ generation rate decreased. On the other hand, the effects of UV radiation, shock waves etc. increased the $H_2O_2$ generation rate as the solution conductivity increased. A higher rate of $H_2O_2$ generation can be achieved by mixing argon to oxygen which generates a stronger and more stable discharges.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.12
• /
• pp.1781-1786
• /
• 2011

This study was conducted to investigate the cause of microbiological contamination in yogurt and evaluate the effect of physicochemical treatment on the growth inhibition of Hanseniaspora uvarum isolated from yogurt. The yeast strain Hanseniaspora uvarum Y1 was subjected to heat and pH treatments. H. uvarum Y1 was killed at $70^{\circ}C$ and $80^{\circ}C$ after 15 min and survived in a wide pH range from pH 2 to 9. However, it did not survive under pH 1 and over pH 10. In a disk diffusion susceptibility test on H. uvarum Y1, a clear zone (5 mm) of growth inhibition was observed upon treatment with electrolyzed water. The effect of ozone gas on the growth of H. uvarum Y1 was evaluated by viable cell count. Initial cell numbers of $10^2$ and $10^3$ CFU/mL of H. uvarum Y1 were completely killed by treatment for 10 and 30 min, respectively. H. uvarum Y1 was also sterilized by microwave treatment for 1 min. When treated with gamma-irradiation, the rate of killing of H. uvarum Y1 was proportional to the irradiation dose. and complete killing occurred at a dose of 50 kGy.

• Korean Journal of Food Science and Technology
• /
• v.54 no.2
• /
• pp.134-140
• /
• 2022

Kelp belongs to the brown algae family and has been reported to exert anti-cancer effects on some cancer types, however studies have not been reported on the anti-cancer effects of kelp extracts on melanoma. In this study, the anti-cancer effects of kelp extract in B16-F0 cells were investigated, and the underlying molecular mechanisms were assessed. Kelp extract was found to inhibit the proliferation of B16-F0 cells, induce cytotoxicity, inhibit cell colony formation, and induce DNA fragmentation and apoptosis. The molecular mechanism was found to involve kelp extract increasing the expression of cytochrome-c and activated caspase-9 in the intrinsic apoptotic pathway. In addition, kelp extract upregulated the expression of Fas-associated protein with death domain and activated caspase-8 in the extrinsic apoptosis pathway. Activation of caspase-9 and caspase-8 by kelp extract induced activation of caspase-3 and cleaved poly adenosine diphosphate-ribose polymerase, consequently inducing apoptosis. These data suggest that kelp extract represents a potential therapeutic agent for melanoma.

• Journal of Sensor Science and Technology
• /
• v.6 no.6
• /
• pp.451-457
• /
• 1997

The thick films of oxide semiconductors such as $WO_{3}$, $SnO_{2}$ and ZnO for the $NO_{2}$ detection of sub-ppm range have been prepared and their characteristics were investigated. It is showed that the optimum operating temperatures of the sensors are $300^{\circ}C$ and $220{\sim}260^{\circ}C$ for $WO_{3}$-based and $SnO_{2}$-based thick films, and ZnO-based thick films, respectively. Since the resistance of ZnO-based thick films are extremely high($>10^{6}{\Omega}$), the signal to noise ratio was comparatively low. In order to determine the selectivity, the films are exposed to the interfering gases such as ozone, ammonia, methane and the mixture of carbon monoxide and propane. $WO_{3}$-ZnO(3 wt.%) and $SnO_{2}-WO_{3}$(3 wt.%) thick film sensors show high sensitivity, good selectivity, excellent reproducibility and the linearity of $NO_{2}$ concentration versus sensor resistance. The preliminary results clearly demonstrated that the sensor can be successfully applied for the detection of $NO_{2}$ in sub-ppm range.

• Korean Journal of Food Science and Technology
• /
• v.53 no.1
• /
• pp.1-11
• /
• 2021

In this review, recent foodborne outbreaks caused by viruses in the Republic of Korea (2010-2019) were analyzed. The human norovirus was found to be the major foodborne virus causing an average of 94.9% of the viral outbreaks. Reverse-transcription polymerase chain reaction (PCR) with electrophoresis has been widely used to detect viruses, but several rapid detection methods, including real-time PCR, multiplex PCR, and quantum dot assay, have also been suggested. For norovirus inactivation studies, surrogates such as murine norovirus and feline calicivirus have been widely used to identify the reduction rate owing to the limitations in laboratory cultivation. Conversely, direct cell infection studies have been conducted for other foodborne viruses such as adenovirus, astrovirus, rotavirus, and hepatitis A or E virus. Moreover, virucidal mechanisms using various physical and chemical treatments have been revealed. These recent studies suggest that rapid in situ detection and effective control are valuable for ensuring food safety against viral infections.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.6-7
• /
• 1972

The air pollutants can be classified into the irritant gas and the asphixation gas, and the irritant gas is closely related to the otorhinolaryngological diseases. The common irritant gases are nitrogen oxides, sulfur oxides, hydrogen carbon compounds, and the potent and irritating PAN (peroxy acyl nitrate) which is secondarily liberated from photosynthesis. Those gases adhers to the mucous membrane to result in ulceration and secondary infection due to their potent oxidizing power. 1. Sulfur dioxide gas Sulfur dioxide gas has the typical characteristics of the air pollutants. Because of its high solubility it gets easily absorbed in the respiratory tract, when the symptoms and signs by irritation become manifested initially and later the resistance in the respiratory tract brings central about pulmonary edema and respiratory paralysis of origin. Chronic exposure to the gas leads to rhinitis, pharyngitis, laryngitis, and olfactory or gustatory disturbances. 2. Carbon monoxide Toxicity of carbon monoxide is due to its deprivation of the oxygen carrying capacity of the hemoglobin. The degree of the carbon monoxide intoxication varies according to its concentration and the duration of inhalation. It starts with headache, vertigo, nausea, vomiting and tinnitus, which can progress to respiratory difficulty, muscular laxity, syncope, and coma leading to death. 3. Nitrogen dioxide Nitrogen dioxide causes respiratory disturbances by formation of methemoglobin. In acute poisoning, it can cause pulmonary congestion, pulmonary edema, bronchitis, and pneumonia due to its strong irritation on the eyes and the nose. In chronic poisoning, it causes chronic pulmonary fibrosis and pulmonary edema. 4. Ozone It has offending irritating odor, and causes dryness of na sopharyngolaryngeal mucosa, headache and depressed pulmonary function which may eventually lead to pulmonary congestion or edema. 5. Smog The most outstanding incident of the smog occurred in London from December 5 through 8, 1952, because of which the mortality of the respiratory diseases increased fourfold. The smog was thought to be due to the smoke produced by incomplete combustion and its byproduct the sulfur oxides, and the dust was thought to play the secondary role. In new sense, hazardous is the photochemical smog which is produced by combination of light energy and the hydrocarbons and oxidant in the air. The Yonsei University Institute for Environmental :pollution Research launched a project to determine the relationship between the pollution and the medical, ophthalmological and rhinopharyngological disorders. The students (469) of the "S" Technical School in the most heavily polluted area in Pusan (Uham Dong district) were compared with those (345) of "K" High School in the less polluted area. The investigated group had those with subjective symptoms twice as much as the control group, 22.6% (106) in investigated group and 11.3% (39) in the control group. Among those symptomatic students of the investigated group. There were 29 with respiratory symptoms (29%), 22 with eye symptoms (21%), 50 with stuffy nose and rhinorrhea (47%), and 5 with sore thorat (5%), which revealed that more than half the students (52%) had subjective symptoms of the rhinopharyngological aspects. Physical examination revealed that the investigated group had more number of students with signs than those of the control group by 10%, 180 (38.4%) versus 99 (28.8%). Among the preceding 180 students of the investigated group, there were 8 with eye diseases (44%), 1 with respiratory disease (0.6%), 97 with rhinitis (54%), and 74 with pharyngotonsillitis (41%) which means that 95% of them had rharygoical diseases. The preceding data revealed that the otolaryngological diseases are conspicuously outnumbered in the heavily polluted area, and that there must be very close relationship between the air pollution and the otolaryngological diseases, and the anti-pollution measure is urgently needed.