• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.266-267
• /
• 2011

질화갈륨(GaN)은 높은 전자이동도 및 높은 항복전계를 가지며 낮은 온저항으로 인하여 에너지효율이 우수하기 때문에 고출력 전력소자 분야에서 많은 관심을 받고 있다. GaN을 이용한 고출력 전력소자의 경우 상용화 수준에 근접할 만한 기술적 진보가 있었으나, 페르미 레벨 고정(Fermi-level pinning) 현상, 소자의 누설전류 등 아직 해결되어야 할 문제를 갖고 있다. 본 연구에서는 실리콘 기판 위에 성장된 GaN 에피탁시를 활용한 고출력 전력소자의 누설전류를 억제시키기 위해 오믹 접합 중 Au의 상호확산을 억제하는 중간층 금속(Mo or Ni)을 변화시켰으며 오믹 열처리 온도에 따른 특성을 비교 연구하였다. $Cl_2$와 $BCl_3$를 이용하여 0.6 ${\mu}m$ 깊이의 메사 구조가 활성영역을 형성하였고, Si 도핑된 n-GaN 위에 Ti/Al/Mo/Au (20/100/25/200 nm) 와 Ti/Al/Ni/Au (20/100/25/200 nm) 오믹 접합을 각각 설계, 제작하였다. 오믹 열처리시의 GaN 표면오염을 방지하기 위해 $SiO_2$ 희생층을 증착하였다. 오믹 접합 형성을 위해 각 750$^{\circ}C$, 800$^{\circ}C$, 850$^{\circ}C$에서 30초간 열처리를 진행 하였으며, 이후 6 : 1 BOE 용액으로 $SiO_2$ 희생층을 제거하였다. 750, 800, 850$^{\circ}C$에서 Ti/Al/Mo/Au 구조의 오믹 접합 저항은 각 2.56, 2.34, 2.22 ${\Omega}$-mm 이었으며, Ti/Al/Ni/Au 구조의 오믹 접합 저항은 각 43.72, 2.64, 1.86 ${\Omega}$-mm이었다. Isolation 누설전류를 측정하기 위해서 두 개의 오믹 접합 사이에 메사 구조가 있는 테스트 구조를 제안하였다. Isolation 누설전류는 Ti/Al/Mo/Au 구조에서 두 오믹 접합 사이의 거리가 25 ${\mu}m$이고 100 V일 때 750, 800, 850 $^{\circ}C$의 열처리 온도에서 각 1.25 nA/${\mu}m$, 2.48 nA/${\mu}m$, 8.76 nA/${\mu}m$이었으며, Ti/Al/Ni/Au 구조에서는 각 1.58 nA/${\mu}m$, 2.13 nA/${\mu}m$, 96.36 nA/${\mu}m$이었다. 열처리 온도가 증가하며 오믹 접합 저항은 감소하였으나 isolation 누설전류는 증가하였다. 750$^{\circ}C$ 열처리에서 오믹 접합 저항은Ti/Al/Mo/Au 구조가 Ti/Al/Ni/Au 구조보다 약 17배 우수하였고, 850$^{\circ}C$ 고온의 열처리 경우 Ti/Al/Mo/Au 구조의 isolation 누설전류는 8.76 nA/${\mu}m$로 Ti/Al/Ni/Au의 누설전류 96.36 nA/${\mu}m$보다 약 11배 우수하였다. Ti/Al/Mo/Au가 Ti/Al/Ni/Au 보다 오믹 접합 저항과 isolation 누설전류 측면에서 전력용 GaN 소자에 적합함을 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.11 no.1
• /
• pp.35-42
• /
• 2002

We fabricate thermally stable and low resistance Ru ohmic contacts to $n-ZnO:Al(3\times10^{18}\textrm{cm}^{-3})$, grown by specially designed dual target sputtering system. It is shown that the as-deposited Ru contact produces a specific contact resistance of $2.1{\times}10^{-3}{\Omega}\textrm{cm}^2$. Annealing of the Ru contacts leads to the improvement of current-voltage characteristics. For example, annealing of the contact at $700^{\circ}C$ for 1 min produces a contact resistance of $3.2{\times}10^{-5}}{\Omega}\textrm{cm}^2$. furthermore, the metallisation scheme is found to be thermally stable: the surface of the contact is fairly smooth with a rms roughness of 1.4 nm upon annealing at $700^{\circ}C$. These results strongly indicate that the Ru contact represents a suitable metallisation scheme for fabrication of high-performance ZnO-based optical devices and high-temperature devices. In addition, possible mechanisms are suggested to describe the annealing temperature dependence of the specific contact resistance.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.218-227
• /
• 2003

Pd/Si/Ti/Pt and Pd/Si/Pd/Ti/Au ohmic contacts to n-type InCaAs were investigated for applications to AlGaAs/GaAs HBT emitter ohmic contacts. In the Pd/Si/Ti/Pt ohmic contact, as-deposited contact showed non-ohmic behavior, and high specific contact resistivity of $5\times10^{-3}\Omega\textrm{cm}^2$ was achieved by rapid thermal annealing at $375^{\circ}C$/10 sec. However, the specific contact resistivity decreased remarkably to $2\times10^{-6}\Omega\textrm{cm}^2$ by annealing at $425^{\circ}C$/10sec. In the Pd/Si/Pd/Ti/Au ohmic contact, minimum specific contact resistivity of $3.9\times10^{-7}\Omega\textrm{cm}^2$ was achieved by annealing at $400^{\circ}C$/20sec. In both ohmic contacts, low contact resistivity and non-spiking planar interface between ohmic materials and InGaAs were maintained. Therefore, these thermally stable ohmic contact systems are promising candidates for compound semiconductor devices. RF performance of the AlGaAs/GaAs HBT was also examined by employing the Pd/Si/Ti/Pt and Pd/Si/Pd/Ti/Au systems as emitter ohmic contacts. Cutoff frequencies were 63.9 ㎓ and 74.4 ㎓, respectively, and maximum oscillation frequencies were 50.1 ㎓ and 52.5 ㎓, respectively. It shows very successful high frequency operations.

• Journal of the Korean Vacuum Society
• /
• v.11 no.1
• /
• pp.43-49
• /
• 2002

Pd/Ge/Pd/Ti/Au ohmic contact to n-type InGaAs was investigated with rapid thermal annealing conditions. Minimum specific contact resistivity of $1.1\times10^{-6}\Omega\textrm{cm}^2$ was achieved after annealing at $400^{\circ}C$/10sec, and a ohmic performance was degraded at higher annealing temperature due to the chemical reaction between the ohmic contact materials and the InGaAs substrate. However, non-spiking planar interface and relatively good ohmic contact($high-10^{-6};{\Omega}\textrm{cm}^2$) were maintained. This ohmic contact system is expected to be a promising candidate for compound semiconductor devices.

• Korean Journal of Materials Research
• /
• v.7 no.5
• /
• pp.390-396
• /
• 1997

AIGaAs/InGaAs/GaAs high electron mobility transisters(HEMT)소자의 오믹 접합재료로 일반적으로 사용되고 있는 AuGeNi의 접합저항과 열적 안정성을 향상시키기 위한 새로운 접합재료에 대해 연구하였다. 이를 위해 sub/M$_{1}$Au-Ge/M$_{2}$Au의 구조에서 M$_{1}$을 Ni과 Pd, M$_{2}$를 Ni, Ti, Mo로 하였을 경우의 접합 재료에 대한 오믹 접합 특성의 변화를 조사하였다. 또한 일반 열처리로와 램프 히터를 이용한 고속 열처리에 따른 오믹 특성을 조사하였다. M$_{1}$을 Ni에서 Pd으로 대체하였을 경우 접합 저항은 약간 증가하였으며 접합 특성의 개선을 관찰되지 않았다. M$_{2}$를 Ni에서 Ti이나 Mo로 대치하였을 경우, 접합 저항은 감소하였고 열적 안정성과 접합 형상은 현저히 개선되었다. 특히 Ni/Au-Ge/Mo/Au의 접합재료는 급속 열처리에 의해 -0.1Ωmm의 극히 낮은 잡합 저항과 우수한 접합 형상을 갖는 것으로 조사되었다.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.219-224
• /
• 2001

Pd/Ge/Ti/Pt ohmic contact to n-type InCaAs was investigated. Minimum specific contact resistivity of $3.7\times10^{-6}\; \Omega\textrm{cm}^2$ was achieved by rapid thermal annealing at $400^{\circ}C$ for 10 seconds. This was related to the formation of Pd-Ge compounds and the in-diffusion of Ge atoms to InGaAs surface. However, the specific contact resistivity increased slightly to $low-10^5\; \Omega\textrm{cm}^2$ in the case of longer annealing time. Superior ohmic contact and non-spiking planar interface between ohmic materials and InGaAs were maintained after annealing at high temperature. Therefore, this thermally stable ohmic contact system is a promising candidate for compound semiconductor devices.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.353-358
• /
• 2013

The current interruption method is considered to be an efficient way of measuring the resistance of a fuel cell. In this study, the ohmic area specific resistances (ASRs) of polymer electrolyte fuel cells with different types of bipolar plates were evaluated using the current interruption method. The ohmic ASRs of both a fuel cell with graphite bipolar plates and a fuel cell with graphite foil-based assembled bipolar plates decreased as the current density increased. On the other hand, with increasing cell temperature, the ohmic ASRs of a fuel cell with graphite bipolar plates were decreased by a reduction in the proton transport resistance through the membrane, and the ohmic ASRs of a fuel cell with graphite foil-based assembled bipolar plates were increased by the differences in thermal expansion between different components of the bipolar plates.

• Journal of the Korean Vacuum Society
• /
• v.11 no.4
• /
• pp.201-206
• /
• 2002

Pd/Si/Pd/Ti/Au ohmic contact to n-type InGaAs was investigated with rapid thermal annealing conditions. Minimum specific contact resistivity of $3.9\times10^{-7}\Omega\textrm{cm}^2$ was achieved at $400^{\circ}C$/20sec. This was related to the formation of Pd-Si compounds by rapid thermal annealing and the in-diffusion of Si atoms to InGaAs surface. However, the specific contact resistivity increased slightly to low-$10^{-6}\Omega \textrm{cm}^2$ at $400^{\circ}C$ for longer than 30 seconds, and to high-$10^{-7}$ at 425~$450^{\circ}C$ for 10 seconds. This resulted from the formation of Pd-Ga compounds. Superior ohmic contact and non-spiking planar interface between ohmic materials and InGaAs were maintained after annealing at high temperature. Therefore, this thermally stable ohmic contact system is a promising candidate for compound semiconductor devices.

• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.368-373
• /
• 2001

Pd/Si/Ti/Pt ohmic contact to n-type InGaAs was investigated. As-deposited contact showed non-ohmic behavior, and high specific contact resistivity of $5\times10^{-3}\Omega\textrm{cm}^2$ was achieved by rapid thermal annealing at $375^{\circ}C$ for 10 seconds. However, the specific contact resistivity decreased remarkably to $1.7\times10^{-6}\Omega\textrm{cm}^2$ and $2\times10^{-6}\Omega\textrm{cm}^2$ at $375^{\circ}C$/60sec and $425^{\circ}C$/10sec, respectively. Superior ohmic contact and non-spiking planar interface between ohmic materials and InGaAs were maintained even at $450^{\circ}C$, therefore, this thermally stable ohmic contact system is a promising candidate for compound semiconductor devices.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.47.2-47.2
• /
• 2007