• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.58-66
• /
• 2012

Even after establishment of H.264/AVC standard, the video coding experts group (VCEG) of ITU-T has researched on development of promising coding techniques to increase coding efficiency based on the key technology area (KTA) software. Recently, the joint collaboration team video coding (JCT-VC) which was composed of the VCEG and the motion picture experts group (MPEG) of ISO/IEC is developing a next-generation video standard namely HEVC intended to gain twice efficiency than H.264/AVC. An adaptive interpolation technique, one of various next-generation techniques, reported higher coding efficiency. However, it has high computational complexity and does not deal with various error characteristics for videos. In this paper, we investigate characteristics of interpolation filters and propose an effective fixed interpolation filter bank including diverse properties of error. Experimental results is shown that the proposed method achieved bitrate reduction by 0.7% and 1.3% compared to fixed directional interpolation filter (FDIF) of the KTA and the directional interpolation filter (DIF) of the HEVC test model, respectively.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.257-267
• /
• 2006

암은 한국에서 전체 사망률의 가장 많은 원인 중의 하나이며 이 중 간세포 암은 암에 의한 사망원인 중 성별에 관계없이 위암 다음으로 사망률이 높다. 특히 $40{\sim}60$세까지 중장년 기에서의 간암 발생률은 세계에서 가장 높은 발병률을 보이고 있으며 OECD 국가 중에서 간암 사망률로 최고 수치를 기록하고 있다. 본 논문에서는 조영증강 CT 영상에서 간암을 자동으로 추축하는 방법을 제안하여 전문의를 보조할 수 있는 보조 전문가 시스템으로서의 유용성을 확인하고자 한다. 흉부로부터 5mm 간격으로 약 $40{\sim}50$장 정도 촬영한 조영 증강 CT 영상으로부터 늑골의 정보를 이용하여 장기들의 정보만으로 구성된 내부 영역과 늑골 및 피하지방층, 그리고 배경으로 구성된 외부 영역을 구분한다. 간 영역의 정보가 포함된 내부 영역에서 명암도와 명암의 분포도, 간의 형태 및 위치 정보, 그리고 각 슬라이드를 기준으로 이전 CT 영상과 다음 CT 영상의 정보를 이용하여 간 영역을 추출한다. 간암은 추출된 간 영역에 형태기반 보간법을 적용하여 CT 촬영시 생기는 슬라이드 사이의 5mm 공간정보를 복원한 후, 각 슬라이드를 기준으로 이전 CT 영상과 다음 CT 영상의 정보와 간암이 가지는 명암도 및 형태학적 특정 정보를 이용하여 추출한다. 제안된 간 영역 및 간암 추출 방법을 전문의가 판별한 것과 비교 분석한 결과, 전문의를 보조 할 수 있는 보조 전문가 시스템으로서 효율적임을 확인할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.31-37
• /
• 2004

Wavelet transform is a useful tool for analysis and process of image. This showed good performance in image compression and noise reduction. Wavelet coefficients can be effectively modeled by hidden Markov tree(HMT) model. However, in application of HMT model to image interpolation, training procedure is needed. Moreover, the parameters obtained from training procedure do not match input image well. In this paper, the structure of HMT is used for image interpolation, and the parameters of HMT are obtained from statistical characteristics across wavelet subbands without training procedure. In the proposed method, wavelet coefficient is modeled as Gaussian mixture model(GMM). In GMM, state transition probabilities are determined from statistical transition characteristic of coefficient across subbands, and the variance of each state is estimated using the property of exponential decay of wavelet coefficient. In simulation, the proposed method shows improvement of performance compared with conventional bicubic method and the method using HMT model with training.

• Journal of the Korea Computer Graphics Society
• /
• v.16 no.4
• /
• pp.1-10
• /
• 2010

We present a method to reproduce in-between views from captured stereo images to control depth feeling that a user can perceive on a 3D display. The stereo images captured from a pair of cameras have a fixed viewpoint and a screen parallax which depend on the physical position and the distance between the cameras. In this paper, we produce stereo images of an intermediate viewpoint between two original cameras by a view interpolation on the input stereo images. Furthermore, the camera separation of the reproduced stereo images can be controlled by a linear interpolation coefficient used by the view interpolation. By using the proposed method, stereo images can be reproduced where the depth feeling and a three dimensional effect is suitable for the individual's eye separation or the characteristic of an application.

• The Journal of the Korea Contents Association
• /
• v.6 no.6
• /
• pp.33-41
• /
• 2006

Nowadays, CCTV can be come across easily in public institutions, banks, and etc. These CCTV play very important roles for preventing many kinds of crimes and resolving those crime affairs. But in the case of recording image of a specific person far from the CCTV, the original image needs to be enlarged and recovered in order to identify the person more obviously. Interpolation is usually used for the enlargement and recovery of the image in this case. However, it has a certain limitation. As the magnification of enlargement is getting bigger, the quality of the original image can be worse. This paper uses FDP(Facial Definition Parameter) proposed by the MPEG-4 SNHC FBA group and introduces a new algorithm that uses face outline information of the original image based on the FDP, which makes it possible to recover better than the known methods until now.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.801-809
• /
• 2005

This paper proposes a new algorithm for improving the performance of the spatial filter which is the most important part of deinterlacing methods. The conventional edge-based algorithms are not satisfactory in deciding the exact edge direction which controls the performance of the interpolation. The proposed algorithm much increases the performance of the intrafield interpolation by finding exact edge directions based on the binary image. Edge directions are decided using 15 by 3 local window to find not only more accurate but also many low-angle edge directions. The proposed interpolation method upgrades the visual quality of the image by alleviating the misleading edge directions. Simulation results for various images show that the proposed method provides better performance than the existing methods do.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.514-520
• /
• 2009

This paper proposes a new deinterlacing algorithm which improves the performance of the spatial filter. Extracting exact edges is very important element of deinterlacing performance. So the proposed algorithm has interpolated locally adaptive-thresholded binary image, and extracted exact edges from the interpolated binary image. The values of pixels on edges extracted from binary image are interpolated using neighborhood lines on the same edge. With computer simulations for a variety of images, it is shown that the proposed algorithm is much better than traditional methods.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.3
• /
• pp.165-170
• /
• 2019

Recently, modern society has come up with the importance of video processing as various imaging systems have developed. However, deterioration occurs in the process of transmitting, processing, and storing video data for various reasons. Deterioration will damage the original image, and the typical noise is Salt and Pepper noise. There are A-TMF, CWMF, and linear interpolation as the means to eliminate Salt and Pepper noise. However, these methods show somewhat poor noise abatement performance in high-density noise areas. Therefore, this paper proposes an algorithm to eliminate noise using modified linear interpolation. To prove the validity of the proposed algorithm, PSNR, Profile was used to compare it with existing methods.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.26-36
• /
• 2006

In this paper, we propose a cost-effective color filter may (CFA) demosaicing method for digital still cameras in which a single CCD or CMOS image sensor is used. Since a CFA is adopted, we must interpolate missing color values in the red, green and blue channels at each pixel location. While most state-of-the-art algorithms invest a great deal of computational effort in the enhancement of the reconstructed image to overcome the color artifacts, we focus on eliminating the color artifacts with low computational complexity. Using spatial correlation of the adjacent pixels, the edge-directional information of the neighbor pixels is used for determining the edge direction of the current pixel. We apply our method to the state-of-the-art algorithms which use edge-directed methods to interpolate the missing color channels. The experiment results show that the proposed method enhances the demosaiced image qualify from $0.09{\sim}0.47dB$ in PSNR depending on the basis algorithm by removing most of the color artifacts. The proposed method was implemented and verified successfully using verilog HDL and FPGA. It was synthesized to gate-level circuits using 0.25um CMOS standard cell library. The total logic gate count is 12K, and five line memories are used.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1025-1034
• /
• 2022

In this paper, we propose a post-processing method through interpolation of hole regions that occur when extracting point clouds. When image matching is performed on stereo image data, holes occur due to occlusion and building façade area. This area may become an obstacle to the creation of additional products based on the point cloud in the future, so an effective processing technique is required. First, an initial point cloud is extracted based on the disparity map generated by applying stereo image matching. We transform the point cloud into a grid. Then a hole area is extracted due to occlusion and building façade area. By repeating the process of creating Triangulated Irregular Network (TIN) triangle in the hall area and processing the inner value of the triangle as the minimum height value of the area, it is possible to perform interpolation without awkwardness between the building and the ground surface around the building. A new point cloud is created by adding the location information corresponding to the interpolated area from the grid data as a point. To minimize the addition of unnecessary points during the interpolation process, the interpolated data to an area outside the initial point cloud area was not processed. The RGB brightness value applied to the interpolated point cloud was processed by setting the image with the closest pixel distance to the shooting center among the stereo images used for matching. It was confirmed that the shielded area generated after generating the point cloud of the target area was effectively processed through the proposed technique.